A&S Semiconductor Co.,Ltd can supply many kinds of super capacitors: ceramic super capacitors high temperature supercapacitor high voltage super capacitor high voltage supercapacitor high voltage ultracapacitor capacitor and supercapacitor electrochemical supercapacitor battery and supercapacitor super supercapacitor charging super capacitor double layer supercapacitor nanotube supercapacitor A&S Semiconductor Co.,Ltd also can supply super capacitors from so many international brands: ELNA super capacitor, Boostcap ultracapacitor, Cellergy supercapacitor, EEStor ultracapacitor, Panasonic super capacitor, EDLC edlc supercapacitor, Maxwell ultracapacitor, KORCHIP supercapacitor, VINA TECH supercapacitor, Nesscap supercapacitor, SANWHA supercapacitor, Hitachi supercapacitor, NEC supercapacitor, NCC supercapacitor, MURATA supercapacitor, ATC supercapacitor, WIMA supercapacitor, SII supercapacitor
Alternator 60a 11044424 Characteristics P/n : 11044424 Nsn no : 2920 - 00909 - 2483 Voltage : dc 28 ±0.2v Output current : 60a Speed : 950 ~ 8,000 Amb. Temp. Range : -53.8 ~ 107.2 2.5t & 5t military truck
Alternator 150a dya1162 Characteristics Voltage : dc 24v Output current : 150a Speed : 1,050 ~ 8,000 rpmamb. Temp. Range : -35°c ~ 100°c For special vehicles and hyundai/daewoo over 4.5 ton commercial vehicles Engine type : for d6da, for d6br (2 type)
Features: 1. 20-250VAC/VDC universal power supply 2. Solid-state or relay output 3. Compact or standard units 4. No calibration required 5. Explosion proof units available 6. Mini, standard and extended probe versions
Features: 1. No moving parts, solid-state performance and reliability 2. 1~59? per second (150cm/s) measuring range for water; 1~118? (300cm/s) range in oil 3. 304SS, 316SS, PVDF and polypropylene wetted parts 4. Maximum operating pressure up to 1,450psi (100bar) 5. Choice of NPN/PNP, N.O. or N.C. relay, or SPDT relay output 6. Standard and custom extended insertion lengths 7. Standard or high temperature, explosion proof units available 8. LED indication of flow status 9. Marine certified unit available
Features: 1. Bargraph and/or digital displays 2. Single or dual channel 3. Transmitter power supply for 2-wire loop powered input 4. Variety of input types 5. Non-linear tank volume calculation, retransmission output and relay outputs available 6. Horizontal or vertical orientation
Standard rating: 50A @ 125VAC / 250VAC. Temperature range: 40J - 140J Operating tolerance: 5J. Dielectric strength: 1500 vac / 1 minute. Resistance to tracking: 175VAC Type of connectors: screw terminal. Contacts endurance: B-2003m: 300 cycles. B-2003a: 1, 000 cycles.
Standard rating: 50A @ 125VAC / 250VAC. Temperature range: 40 - 140 Operating tolerance: 5. Dielectric strength: 1500 vac / 1 minute. Resistance to tracking: 175vac Type of connectors: screw terminal. Contacts endurance: B-2003M: 300 cycles. B-2003A: 1, 000 cycles. Approval: TUV, BSMI.
Standard rating: 1-20 ampere. Input power: 12 VDC /125 VAC / 250 VAC. Dielectric strength: 1500 VAC / 1 minute. Reset: manual push reset. Approvals: CSA, VDE, CSA C/US.
Powderless etching machine (for zinc/copper/magnesium) Brand: bs (china) Application: zinc/copper/magnesium etching Advantages: bs powderless etching machine is the best in china with good technology innovation, it could give fast and great erosion performance which could compete well with co.Fo.Me.Gra, while price more reasonable. Bath capacity: 20l, 40l, 60l, 80l, 100l, 120l, 140l, 160l, 180l, 200l. Specification: ModelPlating size (mm)Base capacity (l)Rotation (r/min)Temperature control (?)Time control (min)Powder (kw)Voltage (v)Machine size (mm) Bs20250×350200-45015-300-603.2220/380920×600×1100 Bs40360×500400-45015-300-604.0220/3801310×800×1100 Bs60500×600600-45015-300-605.5220/3801500×1000×1100 Bs80500×740800-45015-300-606.5220/3801650×1100×1100 Bs100600×8001000-45015-300-607.0220/3801800×1200×1200 Bs120600×9001200-45015-300-608.5220/3801900×1300×1200 Bs140800×9001400-45015-300-609.3220/3801900×1390×1200 Bs160850×10001600-45015-300-609.5220/3801900×1490×1200 Bs180850×11001800-45015-300-6011.2220/3801950×1560×1200 Bs200900×12002000-45015-300-6012.4220/3801950×1650×1200
The stereo hi-fi audio splitter(mb-shspb) allows one analog stereo hi-fi audio to be split into three hi-fi audio to transmitte via cat5e/6 cable.It can be connected passively to up to three receivers using muxboxs’s stereo hi-fi audio balun (mb-shfb) or active hi-fi audio receiver (mb-ashr) via cat5e/6 cable up to 3, 280ft.It is built in ground loop isolation prevents annoying "hum-bars" common noise with long distance installations.The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required.
Dual xlr(mb-dxlb) audio balun allows dual channels professional audio to be transmitted via cat5e/6 cable, up to 4, 200ft(1250m) in a point-to-point connection.It is built in surge suppressor to protect professional audio equipment against damaging voltage spikes.Its integrated ground loop isolation prevents annoying "hum-bars" common noise with long distance installations.The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required.Used in pairs, the prpfessional audio balun(mb-dxlr) eliminates costly and bulky coaxial cable, allowing audio equipment to be connected or moved within a structured cabling environment.
The mb-ecb is one passive ethernet transmission that can transmit 10 base-t ethernet signal over one coax cable up to 642ft(196m).It allows any cctv ip camera or other ethernet devices to be connected within extended distance without power .With super interference rejection and high-end tvs for surge protection, mb-ecb can protect device from damange.In any harsh electrical areas.The device is often used in legacy installations where existing cable is re-deployed as part of an upgrade to ip cameras or other ethernet devices.Mb-ecb work in pairs .The transmission is extremely simple to use , with no ip or mac addressing required.
1? Suitable for the delivery of bulk materials with 0°-90° dip angle 2? With wide application range, small covers area, no transshipment point, reduction of construction investment, low maintenance cost, easy maintenance, large conveying capacity, continuous, high efficiency, high inclination conveying, safe operation, simple to use, low freight and to shorten the transport distance, reduce the engineering cost, saving manpower and material resources and other features. 3? Achieve the conveying angle which the ordinary belt and pattern belt unable to. 4? Designed to be integrated and independent delivery system according to the use of the environment, to avoid the intermittent transmission and rising system for complex conveying. 5? Can be transported along the horizontal, inclined, vertical direction of a variety of bulk materials, from coal, ore, sand to fertilizer and food, etc. 6? Material size is not limited, can be from a very small size to 400mm of large grain size, transport capacity from 1 cubic meters / hour to 6000 cubic meters / hour We produce various types of rubber products including fabric core layer conveyor belt, steel cord conveyor belt, raised edge conveyor belt, patterned conveyor belt, endless conveyor belt and the rubber plate.Please contact us to find products with reliable quality and competitive price!
Fiber Media Converter Fiber Patch cord Optical Transceiver(SFP.GBIC.BIDI SFP , CWDM) Fiber Adapter Fiber Attenuator Fiber video converter/PDH converter
PLC Splitter LGX Box / Rack PLC Splitter Module Blockless PLC Splitter Bare Fiber PLC Splitter Rack-mountable PLC Splitter
1).It can print 58mm width thermal paper. 2).Paper dimensions 40mm. 3).High-speed and clear printing. 4).Super power lithium electricity, standby time can reach 5-6 days. 5).Auto sleep, auto awake, save electricity. 6).Small size, light weight, reliable performance, simple to connect and easy to use. 7).Support multi languages 8).Low operating costs (no ribbons, ink cartridges) 9).Support qr code and barcode 10).1500mah battery
1).Suitable for all types of commercial detail pos systems 2).Light in weight and smart in shape 3).High-quality printing and low cost 4).Low noise and high-speed printing 5).Support cash drawer driver 6).Support multi languages
1). Mini structure( 104*100*46mm ) and light weight (260g) 2). 80mm thermal print 3). Bluetooth connection, more convenient 4). 90mm/s high speed printing 5).Support qr code and barcode 6).2000mah long lasting battery. 7).Super power lithium electricity, standby time can reach 5-6 days. 8).Auto sleep, auto awake, save electricity. 9).Support multi languages 10).Low operating costs (no ribbons, ink cartridges) Nicole(at)cnfujun.Com
Smd type and negative temperature co-efficient(n.T.C.) thermistors. Generally practice in engineering and electronics industry field, as well as apply in biochemical, technology, automobile and medical system. We can do oem and odm or customize for any type of custimer and recommand the suitable products for them.
