Size: 120mm~146mm
Die-cast aluminum housing
Ac fan with external rotor shaded-pole motor
Item Specifications Step Angle 1.8 Step Angle Accuracy í+5% (full step, no load) Resistance Accuracy í+10% Inductance Accuracy í+20% Temperature Rise 80ípC Max.(rated current,2 phase on) Ambient Temperature -20ípC~+50ípC Insulation Resistance 100M ª+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Max. radial force 28N ( 20mm from the flange ) Max. axial force 10N Rotation CW( See from Front Flange ) Step motor, stepping motor, stepper motor, hybrid stepping motor, stepping
7 LEDS,self-programmable mini fan. Material ABS ; Size: 10.8X 2.3 X 4.8 CM Available LED light colors: Red/Orange/Blue/Green/Purple/White 1 to 6 different LED Texting messages light can be programed by customer own while play Available letters, number and symbols: A to Z Maximum 16 characters (including spaces) for each message Battery need : 3 x AAA Our LED fan with European CE certificate ,Europe RoHS material standard can be offer . Each in a white box, 25 PCS/ inner box, 100pcs/ctn, ctn size: 50 X28 X26.5 CM, GW. 9.8kgs
Power supply 1) switching power supply output: Dc voltage/rated current:5v/12a and12v/5a or5v/6a and24v/4a 2) switching power supply input: Voltage range: 88 ~ 132vac selected by switch 248 ~ 370vdc Ac input frequency: 47 - 63hz Ac current: 2.5a/115vac 1.25a/230vac Inrush current (max.):cold start 18a/115vac 36a/230vac Leakage current:
Item Specifications Step Angle 1.8íp Step Angle Accuracy í+5% (full step, no load) Resistance Accuracy í+10% Inductance Accuracy í+20% Temperature Rise 80ípC Max.(rated current,2 phase on) Ambient Temperature -20ípC~+50ípC Insulation Resistance 100M ª+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Rotation CW( See from Front Flange)
The dry type power range is from 160w to 1800w, and dry-wet type is from 160w to 1400w.
Solar electric fans Description: Led light/camping fan Bulb: 12led Batteries: 9v2.0ah 2w solar panel with 25 years life for use and the battery has 2 years life for use. By the way it is very convenience to take
CQB-F Series Fluoroplastic magnet pump adopts the permanent magnet into centrifugal pump. The pump has the advantages such as fully sealed and no leakage and anticorrosion etc. CQB-F Series Fluoroplastic magnet pump is made of PVF2. The material has the good anticorrosion and high mechanism intensity and no aging and no toxin distribution etc. The pump uses the stationary seal to substitute the rotary seal. The flow passage parts are in full seal to insure no leakage. The pump has the compact structure and good appearance and low noise and small volume and steady operation etc. The pump is widely used to transport acid and alkali and oil etc rare liquids and toxin and volatile liquids in chemical industry and pharmacy and electroplate and food and photo etc and water circulation system and filter system. It is especially for flammable and explosive and leaky liquids. Plywood case
MP Series minitype magnet pump is fully sealed without mechanical seal. The magnetism material in shaft and impeller attract each other for coincidence. Torsion of motor is driven by active magnet and passive magnet to let impeller work. Ceramic bearing has very good wearable and anticorrosion performance. The pump is widely used to transport acid and alkali and oil and rare liquids and toxin and volatile liquids in chemical industry, pharmacy,petroleum, electroplate,food, photo etc and water circulation system and filter system. The pump without explosion proof motor is especially for flammable and explosive and leaky liquids. Plywood case
The wet parts of this pump are made of full stainless steel material to perform outstanding corrosion resistance to organicacid,organic compound,alkali,neutral solution and a great many of gases. double helix carbon graphite bearing and hard alloy bearing are provided with good abrasion-resisting property to ensure the service life of product.It is an optimal pump for handling corrosive mediums without leakage. plywood case
CQ Series magnet pump is the new centrifugal pump used with magnetic coupling. The material of magnet pump has the stainless steel and reinforced polypropylene and engineering plastic etc. The pump has the advantages of reasonable design and entire seal and no leak and anticorrosion characteristic. The rotary seal replaces the stationary seal to insure no leak because the parts which contact with liquids are entirely sealed. Magnet pump is made of engineering plastic with anticorrosion and high strength and ceramic and stainless steel to insure good anticorrosion performance. Magnet pump has single structure and good appearance and small volume and low noise and reliable operation. The pump is widely used to transport the acid and alkali and oil and toxin and volatile liquids in chemical industry, pharmacy, petroleum, electroplate and food, etc. It is very suitable for leaky and flammable and explosive liquids. Plywood case
Zcq series self priming type magnet pump is the magnet pump with 4meter self priming height but it need not install foot valve and pour guide water. Rotary ring replaces stationary ring so that parts which contact with liquids are entirely sealed and no leak. Pump body and parts which contacts with liquids are stainless steel and ceramic and teflon etc material to insure the good anticorrosion performance Plywood case
Item Specifications Step Angle 0.72íp or 0.36íp Step Angle Accuracy í+5% (full step, no load) Resistance Accuracy í+10% Inductance Accuracy í+20% Temperature Rise 80ípC Max.(rated current,2 phase on) Ambient Temperature -20ípC~+50ípC Insulation Resistance 100M ª+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Max. radial force 220N ( 20mm from the flange ) Max. axial force 60N Insulation Class B
We can customized many categories of lamps; 1. Table lamp 2. Floor lamp 3. Ceiling lamp T/t 50% before shipment, 50% after shipment > Usd 5, 000 with assorted items
Hybrid stepping motor Item specifications Step angle 1.2or 0.6 Step angle accuracy 5% (full step, no load) Resistance accuracy 10% Inductance accuracy 20% Temperature rise 80c max.(rated current, 2 phase on) Ambient temperature -20c~+50c Insulation resistance 100m + min. , 500vdc Dielectric strength 500vac for one minute Shaft radial play 0.02max. (450 g-load) Shaft axial play 0.08max. (450 g-load) Max. Radial force 220n ( 20mm from the flange ) Max. Axial force 60n Insulation class b
Case dimension: (L*W*H) not include front panel size: SA:380(L)*180(W)*408(H)mm RJA-N:390(L)*180(W)*408(H)mm RJA:420(L)*180(W)*408(H)mm With USB V1.0 Carton dimension: (L*W*H) 440*212*435(mm) Driver space: 4*5.25, internal: 8*3.5 container loading: 20"=678 PCS 40"HQ=1,565 PCS 20"=678 PCS 40"HQ=1,565 PCS
Monoblock Inline Multistage Immersion Submersible Air tank compressors
Votlage : 230 / 240 a c, 50 hz Watts : 1000 watts Handle to press the plate together Knob to lift the top plate. Stainless steel cover of the plates. Mains on indicator red neon light Grid (non-stick surface coated with greblon gamma from weilburger germany). Mains cord Consisit a thermostat to maintain required temperature Provided with a thermofuse as an additional protection in case of thermostat failure
