Coke Suppliers and Manufacturers

Petcoke, also known as petroleum coke, is a carbon-rich solid material that is produced during the refining of crude oil. The specifications of petcoke can vary depending on the type and source of crude oil, as well as the processing method used to produce it. However, here are some of the general specifications for petcoke: - Carbon content: Typically ranges from 85% to 95% - Sulfur content: Can range from less than 1% to over 7% - Moisture content: Typically less than 5% - Ash content: Can range from less than 1% to over 10% - Volatile matter: Can range from less than 5% to over 20% - Size: Can range from a fine powder to large chunks Petcoke is primarily used as a fuel source in industrial processes, such as cement manufacturing, power generation, and steel production. It is a cheaper alternative to coal, and its high carbon content makes it an effective fuel for energy-intensive processes. However, its high sulfur content can contribute to air pollution and acid rain, so it is often subject to emissions regulations. Petcoke is also used in the production of anodes for the aluminum smelting industry, as well as in the production of graphite electrodes for the steel industry. In addition, it is sometimes used as a source of carbon in the production of certain chemicals and materials.

Pet coke from refineries in Kazaskhstan

For metallurgical coke, we can supply based on the following range of specifications: Fixed carbon: 80%~86% Sulphur: 0.7%~1.0% Ash:13.5%~18% Volatile matter: 1.5% max. Moisture: 8%~15% Size is customized

We supply foundry coke products with the range of specifications as follows: Fixed carbon: 85%~90% Sulphur: 0.5%^0.8% Volatile matter: 1.5% max. Size is customized ASH >8%/15%

FIXED CARBON 98.5%MIN Sulphur 0.1%MAX Ash 0.7%Max Volatile matter 0.8%MAX moisture 0.5%max Size 1.5 mm

Fixed carbon 99% min. Sulphur 0.03%max. Ash 0.5% max. Volatile matter 0.5% max. Moisture Size (mm) HQ-GES-01 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1

Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate. Item HQ-SGPC-01 Fixed carbon Sulphur 98.5% min. 0.1% max. Ash 0.7% max. Volatile matter Moisture Size(mm) HQ-SGPC-02 98.5% min. 0.2% max. 0.7% max. HQ-SGPC-03 98.5% min. 0.3% max. 0.7% max. HQ-SGPC-04 98% min. 0.5% max. 1% max. HQ-SGPC-05 98% min. 0.8% max. 1% max. 0.8% max. 0.5% max. 0.8% max. 0.5% max. Graphite Electrode Scrap(GES) Item Fixed carbon Sulphur Ash HQ-CPC-01 98.5% min. 0.5% max. 0.7% max. HQ-CPC-02 98.5% min. 0.8% max. 0.7% max. HQ-C PC -03 98.5% min. 1% max. 0.5% max. HQ-CPC-04 98.5% min. 2% max. 0.5% max. HQ-CPC-05 98.5% min. 3% max. 0.5% max. Size(mm) 1-3/1-5 1-5/30-60 1-3/5-20 1-5 0-2 Item Fixed carbon Sulphur Ash Volatile matter Moisture Size (mm) HQ-GES-01 99% min. 0.03%max. 0.5% max. 0.5% max. 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1 * Other sizes and specifications are available,please enquire - HENGQIAOCARBON 1% max. 1% max. 0.5% max. 0.5% max. 0.8% max. 0.5% max. 1-5 3-8 1-5 1-5 1-5 Green petroleum coke 144 shaft kiln for petcoke calcined 1% max. 0.5% max. Crush Sieving Packing Volatile matter Moisture 0.8% max. 0.5% max. 0.8% max. 0.5% max. 1% max. 0.5% max. 1% max. 0.5% max.

High-quality green petroleum coke is taken into Acheson furnace for graphitization process with temperature around 2500-3600 �°C.The product has higher degree of graphitization with nitrogen content is lower than 300ppm.This product, with lower sulpur and ash content, is ideal recarburizer for steelmaking and foundry industries. Fixed carbon 99% min. Sulphur 0.03% max. Ash 0.5% max. 0.7% max. 1% max. 1% max. Volatile matter 0.5% max. 0.8% max. 1% max. 1% max. Moisture 0.5% max. 0.5% max. 0.5% max. 0.5% max. Size(mm) 1-3/1-5 1-5/5-10 0.2-1 0-0.5 2 HQ-GPC-02 98.5% min. 0.05% max. HQ-GPC-03 98% min. 0.07% max. HQ-GPC-04 98% min. 0.1% max. ä¸? è??楺碳表 HENGGIAO CARBON Semi-graphite Petroleum Coke(SGPC) Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate.

Calcined petroleum coke is solid petroleum coke product with black and dark gray color,shine with metallic luster,porosity and composed with micro-graphite crystals.It is the carbon material in the form of granular,columnar and acicular. Type Fixed carbon(Min) Ash(Max) Volatile Matter(Max) Moisture(Max) Sulfur content(Max) Nitrogen content(Max) Calcined petroleum coke 98.5% 0.50% 0.50% 0.50% 0.5% 300ppmSize:1-5mm,1-3mm,or as customer request. Application: 1,Calcined Petroleum Coke can be widely used for producing Anode Paste and Prebaked Carbon Anode for electrolytic Aluminium,application as additive in graphite electrode and carbon raiser production,also used as fuel for silicon. 2,Used as basic raw material for carbon additive and foaming agent. 3,Used in chemical industry as the basic source of sodium hydride and high

Specifications First Grade Second Grade Ash - 10% max Volatile matter - 1.5%max Fixed carbon - 88%min

Fixed carbon : 85%-88% S : 0.6% max Moisture : 5% Ash : 0.6% max V.M : 1.5% Size : 50-100;30-80;25-50;40-70(mm)

We are supplier and exporter of Petroleum Coke. Petroleum Coke are made from a mixing material of serval kinds of coal,under a high temperature(1300) process.They are widely used for steelmaking,ferroalloys manufacture or non-ferrous metals smelting,iron castings manufacture or other related metallurgical and foundry industry,because of its special physical and chemical characteristics:high strength and fixed carbon content,low sulfur and low volatile matter content.