We offer 0-3 mm anthracite for barbecue briquette production. Hydroanthracite Total Moisture, (ISO 589) - 0.7 % Ash, (ISO 1171) - 4,4% Volatile Matter, (IS0562) - 2.8% Total Sulfur, (ISO 334) - 0.90% Fixed Carbon, - 92.1% Quantity 1000m / t per month
Product Description Using calcined anthracite coal carburizing agent and cast iron using carburizing agent steel, and other materials are also useful for adding to the carburant carburant is applied, steelmaking, iron carbon materials. High quality carburizing agent is essential to producing high quality steel auxiliary additives. Usage: For 1-5 T furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. which can make carbon additive fully absorbed. For greater than 5 T furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost. For 0-5 T furnace use: While a small amount molten iron in the furnace Or with some molten iron remained. add the carbon additive one-time Then add the other material Which can make carbon additive fully absorbed. For greater than 5 T furnace Mix proper carbon additive with charging material as suggested first, And then along with the increase of furnace charge down into the furnace inside gradually. That is, before the molten metal rising up to about 2/3 height of furnace All carbon additive shall be added It guarantees sufficient melting absorbing time before molten metal out, and improves the absorption of carbon.
Iron ore, crude oil, mercury, diesel, copper cathode, copper concentrate, copper millbury, pet coke, steam coal, rice, sugar icumsa 45, wheat, rapeseed and urea .
Anthracite is the highest rank coal and is characterized buy low volatile matter (always less than 10%) and high carbon content. It has a semi- metallic luster and is capable of burning without smoke. Semi- anthracite is coal midway between low volatile bituminous coal and anthracite. (1-6 �?�?) Ash content for dry condition no more than 4 % Volatile substances no more than 3 % Moisture no more than 9.5 % Lowest heat of combustion (GCF) at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % (0.2-1 �?�?) Ash content for dry condition no more than 30 % Volatile substances no more than 6 % Moisture no more than 10 % Lowest heat of combustion at least 5,000 kcal/kg Total sulfur for dry condition no more than 1 % (6-13 �?�?) Ash content for dry condition no more than 4 % Volatile substances no more than 4 % Moisture no more than 8 % Lowest heat of combustion at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % Trivia Content no more than 18 % (13-25 �?�?) Ash content for dry condition no more than 5 % Volatile substances no more than 3.5 % Moisture no more than 6.5 % Lowest heat of combustion at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % Trivia Content no more than 17 %
We are trading company in indonesia. We have supply for GAR 4200 up to GAR 6000 Origin from south Kalimantan indonesia If you have inquiries, pls contact me
We are Coal Mining and Trading, ready to supply Steam Coal from South Kalimantan, Indonesia. Specification: GAR 4000-4200. Total Moisture 34.00-36.00 %. Inherent Moisture : 20.00-22.00 %. Ash : 4.00-6.00 %. Total Sulphur : 0.15-1.00 %. Volatile Matter : 38.00-46.00 %. Fixed Carbon : 40.00-42.00 %. Size : 0-50mm 90% min. HGI : 43.00-45.00. Supply Quantity : 50,000-100,000 MT/Month. Minimum Order Quantity : Barge about 7500 MT. Packaging : Bulk. Trade Terms : FOB, CFR. PRICE : ICI 4 (Indonesian Coal Index). Payment : LC at Sight or Cash/TT Terms 5.4.1. Loading Port Barge : Jetty Talenta Bumi, Marabahan-South Kalimantan. Port of Discharge : (Transhipment to Vessel) Taboneo Anchorage-South Kalimantan.
Product Specifications Type: Thermal Coal Origin: Tanzania Quantity: 6,000,000 Metric Tons Specifications: Moisture Content: < 4% Calorific Value: > 6000 kcal/kg Size: Crushed Coal, 0-50 mm Payment Terms: Accepted Methods: Documentary Letter of Credit (DLC), Standby Letter of Credit (SBLC), Letter of Credit (LC) (ONLY)
Origin: Indonesia. Available in CIF or FOB terms. Indonesian Coal grades ICI 1, ICI 2, and ICI 3 are classified based on their calorific values and other specifications. They are widely used in power generation and industrial applications due to their high energy content and low impurities.
Place of Origin : Indonesia Sulphur Content (%) : 0.35 Fixed Carbon (%) : 90 Volatile Matter (%) : 1.5 Coal Calorific : 6300-6100 Min. order : 1000 MT
If you have looking for request : send me I sell product : end buyer,valid buyer 1. Steam coal 2. Silica sand 3. Copper cathodes 4. En590, jet fuel 6. Sugar 7. Looking investor
Model No. CAC-01 CAC-02 CAC-03 CAC-04 CAC-05 Fixed carbon(Min) 90% 92% 93% 94% 95% Ash(Max) 8.50% 6.50% 5.50% 4.50% 3.50% Volaltie matter(Max) 1.50% 1.50% 1.50% 1.50% 1.50% Sulfur(Max) 0.30% 0.30% 0.30% 0.30% 0.30% Moisture(Max) 0.50% 0.50% 0.50% 0.50% 0.50% Size 1-3mm,1-5mm
steam coal indonesia , ready supply worldwide ,
Steam coal Origin : Indonesia Price : ICI minus negotiable FOB and CFR only
Properties UOM Guaranteed Rejection UNWASHED COAL Total Moisture % 15 >18 Ash % 19 >22 Sulfur % 1.48 >1.55 BTU BTU / lb. 9,655
I am an entrepreneur from India having international trading opportunities. My associate has concession with Indonesian coal mines. He is able to provide us with various qualities and specifications of Indonesian Coal at an attractive price. We can also supply various grades from G1- G5 value coal. Please reach out to me if anyone requires good quality coal. We are looking to connect only with serious buyers (only direct buyers) having market credibility and trade history. We can offer the best FOB price. Kindly reach out to me at this email address (ashokvardhank at the rate gmail dot com) with your official requirement and LOI to take it forward.
All information and pricing indicative, subject to reconfirmation and contract. Conexus Metals LLC would like to offer Steam Coal, under the following terms and conditions: Quality: Freshly Mined Steam Coal (no contaminants, no pond fines, no petroleum coke) analyzing on a received basis as follows: Moisture 6.5% Typical 9.0% Max Ash 7-8% Typical 9.5% Max Volatile 35-36% Typical BTU 12,900 Sulfur 3.50% Max HGI 55/57 Size 2â??x0 Quantity: Approximately 95,000 Metric Tons Price: U.S.Dollars 108.00 Metric Ton Delivery: FOB Vessel Lamberts Point, Norfolk VA Shipping Period: To be shipped during first quarter 2024
Commodity : INDONESIAN STEAM COAL IN BULK Specifications : Gar 58800 - 5600 Kcal/Kg, NAR 5500 up Origin : South Kalimantan, East Kalimantan, Central Kalimantan, Indonesia. Quantity Laycan : 50,000 - 300,000 MT first month. January 2023 Loading port : One Safe Port in Kalimantan Anchorage, Indonesia Inspection : PT. CCIC Jakarta or PT. SGS Indonesia or other surveyor (for full & final binding inspection at the port of loading only). Shipping Terms : FOB Mother Vessel and CFR Payment term : LC at Sight or LC USANCE 60 DAYS MT 752 ACCEPTANCE, Value payable 100% loading port analysis and Final Invoice. Applicant LC Must be Top 50 Prime bank. Validity: 7 (seven) banking days from the date of FCO.
Commodity : INDONESIAN STEAM COAL IN BULK Specifications : Gar 5800 â?? 5600 Kcal/Kg Origin : South Kalimantan, East Kalimantan, Central Kalimantan, Indonesia. Quantity Laycan : �± 50,000 â?? 30,000 MT first month. January 2023 Loading port : One Safe Port in Kalimantan Anchorage, Indonesia Inspection : PT. CCIC Jakarta or PT. SGS Indonesia or other surveyor (for full & final binding inspection at the port of loading only). Shipping Terms : FOB Mother Vessel Payment term : LC at Sight or LC USANCE 60 DAYS MT 752 ACCEPTANCE, Value payable 100% loading port analysis and Final Invoice. Applicant LC Must be Top 50 Prime bank. Validity : 7 (seven) banking days from the date of FCO.
Selling under mandate Indonesian Thermal Coal 5000 - (4600 NAR) Origin: Kalimantan Delivery: CIF Quantity: 100 000 MT Payment: L/C Price under ICI
