For the calcined anthracite, fob 320-420usd tianjing port, quotation is valid utill this month, perment term is t/t. But the cost might be different at different purchasing date, so we need to check and update the offer for u again that day when u confirm order date exactly later, please be noted. The calcined anthracite coal is through high temperature treatment and screening, uniform particles, is one of the ideal materials for carburizer and electrode paste. In China, anthracite is usually calcined in electric calciners, rotary kilns and pot furnaces, and the anthracite produced in electric calciners is called as electrically calcined coal (ECA for short) while the anthracite produced in other two calciners is called as gas calcined coal (GCA for short). Electrically calcined anthracite coal, Electrical forging material is made from high-quality anthracite and during calcining, the temperature up to 2000 By calining the high-qualityanthracite, the Coal lattice is hanged Then the anthracite becomes half graphitization. Then the material can meet many demands by changing its physical and chemistry character The specification. Due to it is low in volatile matters, good in thermal and electrical conductivity with the powder resistivity about 600 and mainly used in carbon bricks, electrode pastes and cathode carbon blocks with certain requirements for electrical conductivity. Moreover, the proportion and particle size of ECA in such products vary depending on the situation of different enterprises. The calcination temperature of GCA is about 1200 and its electrical conductivity is far inferior to that of ECA, but the sulfur content of anthracite is usually 0.3-0.5%. GCA is widely used in steel and foundry industry as coal recarburizer by virtue of its higher cost performance. We have established a long-term cooperative relationship with anthracite plants in Vietnam. We also provide calcined anthracite coal and dried anthracite coal from Vietnam: Calcined Anthracite Coal FC 95% ASH 4% S 0.5% FC 92% ASH 6.5% S 0.5% Dried Anthracite Coal FC 85% Ash 11% VM 4% S 1% MO: 5% FC87% Ash7 VM 7% S 0.65 MO:5%
The Electrical Calcined Anthracite is used the best quality anthracite as raw materials through high temperature calcined at over 2000 by the DC electric calciner with results in eliminating the moisture and volatile matter from anthracite efficiently, improving the density and the electric conductivity and strengthening the mechanical strength and anti-oxidation. It has good characteristics with low ash, low resistvity, low sulphur, high carbon and high density. It is the best material for high quality carbon products to production of electrode, and used in cathode blocks for aluminum industry. 1.specification indexes: Fixed carbon 90% Ash 8% Volatile 1.2% Sulfur 0.35% Moisture 0.5% Resistivity 750 2 Fixed carbon 93% Ash 6% Volatile 1.0% Sulfur 0.30% Moisture 0.5% Resistivity 650 3 Fixed carbon 95% Ash 4% Volatile 1.0% Sulfur 0.25% Moisture 0.5% Resistivity 600 2.Real Density:1.80-1.90 G/CM3 min 3.Size:0-20mm,90%min; 1-20mm, 90%min; 1-10mm, 90%min,or at customers option; 4.Packing:In 1200kgs big bag; In 1000kgs big bag; In 25kgs small bag, then into 1000kgs big bag; or 25kgs or 50kgs small bag, then put into containers directly; or at customerâ??s option; 5.Payment:cash, letter of credit. Ningxia carbon valley International Co. Ltd to provide carbon additive, electrode,cold ramming paste, carbon block/brick, graphite block,half of graphite carbon block/brick,self baking carbon block,electrically calcined anthracite coal,electrode paste,silicon carbide,calcinde petrolem coke,The products are sold toJapan, Taiwan, Korea, India, America etc.
Carbon raiser used real Anthracite Coal as material. different material with different price in the market. In fact, the unit cost of carburizer in bituminous(soft) coal production is much higher than that in anthracite production. For example, for steel plants, 300 tons of anthracite carburizer is needed for 200000 tons of steel, but 500 tons of bituminous coal carburizer is needed. Any interesting,please contact us freely. wechat/WhatsAPP numbervis 008613739698406 E-mail ID is sophiawang110609@163.com
SPECIFICATIONS AND OFFER PRICE * Only FOB purchases * Gross Caloric Value (GAD) ADB 5100-4900 5300-5100 5500-5300 5800-5600 Gross Caloric Value (GAR) ARB 3500-3200 4000-3800 3800-3600 4200-4000 4800-4600 5000-4800 5200-5000 Total Moisture ARB 40-47% Max 30-38% Max 33-36% Max 24-28% Max Inherent Moisture ADB 16-22% Max 16-19% Max 15-18% Max 12-15% Max Ash ADB 5-11% Max 6-10% Max 4-8% Max 5-8% Max Volatile Matter ADB 38-45% approx. 38-45% approx. 38-45% approx. 38-42% approx. Fixed Carbon ADB By difference By difference By difference By difference Total Sulfur ADB 0.4-0.8% max 0.5-0.8% max 0.5-0.9% max 0.4-0.8% Max HGI ADB 45-60 approx. 45-60 approx. 45-60 approx. 40-50 approx. Ash Fusion Temperature 1100 De C 1150 De C 1200 De C 1250 De C Size (crushed) ADB 0-50mm (90%) 0-50mm (90%) 0-50mm (90%) 0-50mm (90%) Cash 39.00 $ USD 40.00 $ USD 43.00 $ USD 54.00 $ USD UCANCE LC Acceptance MT752 (Non PB) FOB Mother Vessel 44.00 $ USD 45.00 $ USD 48.00 $ USD 59.00 $ USD SPECIFICATIONS AND OFFER PRICE Gross Caloric Value(GAD) ADB 6000-5800 6300-6100 6500-6300 Gross Caloric Value (GAR) ARB 5400-5200 5800-5600 6000-5800 Total Moisture ARB 18-22% Max 14-18% Max 12-16% Max Inherent Moisture ADB 9-12% Max 9-12% Max 6-10% Max Ash ADB 8-14% Max 12-15% Max 10-14% Max Volatile Matter ADB 35-45% approx. 35-45% approx. 35-45 approx. Fixed Carbon ADB By difference By Difference By Difference Total Sulfur ADB 1.0% max 1.0% max 1.0% max HGI ADB 40-50 approx. 40-50 approx. 40-60 approx. Size (crushed) ADB 0-50mm (90%) 0-50mm (90%) 0-50mm (90%) Ash Fusion Temperature 1280 De C 1300 De C 1350 De C Cash 62.00 $ USD 72.00 $ USD 85.00 $ USD UCANCE LC Acceptance MT752 (Non PB) FOB Mother Vessel 67.00 $ USD 77.00 $ USD 90.00 $ USD
SPECIFICATIONS AND OFFER PRICE Gross Caloric Value (GAD) ADB 5100-4900 5300-5100 5500-5300 5800-5600 Gross Caloric Value (GAR) ARB 3500-3200 4000-3800 3800-3600 4200-4000 4800-4600 5000-4800 5200-5000 Total Moisture ARB 40-47% Max 30-38% Max 33-36% Max 24-28% Max Inherent Moisture ADB 16-22% Max 16-19% Max 15-18% Max 12-15% Max Ash ADB 5-11% Max 6-10% Max 4-8% Max 5-8% Max Volatile Matter ADB 38-45% approx. 38-45% approx. 38-45% approx. 38-42% approx. Fixed Carbon ADB By difference By difference By difference By difference Total Sulfur ADB 0.4-0.8% max 0.5-0.8% max 0.5-0.9% max 0.4-0.8% Max HGI ADB 45-60 approx. 45-60 approx. 45-60 approx. 40-50 approx. Ash Fusion Temperature 1100 De C 1150 De C 1200 De C 1250 De C Size (crushed) ADB 0-50mm (90%) 0-50mm (90%) 0-50mm (90%) 0-50mm (90%) Cash 39.00 $ USD 40.00 $ USD 43.00 $ USD 54.00 $ USD UCANCE LC Acceptance MT752 (Non PB) FOB Mother Vessel 44.00 $ USD 45.00 $ USD 48.00 $ USD 59.00 $ USD SPECIFICATIONS AND OFFER PRICE Gross Caloric Value(GAD) ADB 6000-5800 6300-6100 6500-6300 Gross Caloric Value (GAR) ARB 5400-5200 5800-5600 6000-5800 Total Moisture ARB 18-22% Max 14-18% Max 12-16% Max Inherent Moisture ADB 9-12% Max 9-12% Max 6-10% Max Ash ADB 8-14% Max 12-15% Max 10-14% Max Volatile Matter ADB 35-45% approx. 35-45% approx. 35-45 approx. Fixed Carbon ADB By difference By Difference By Difference Total Sulfur ADB 1.0% max 1.0% max 1.0% max HGI ADB 40-50 approx. 40-50 approx. 40-60 approx. Size (crushed) ADB 0-50mm (90%) 0-50mm (90%) 0-50mm (90%) Ash Fusion Temperature 1280 De C 1300 De C 1350 De C Cash 62.00 $ USD 72.00 $ USD 85.00 $ USD UCANCE LC Acceptance MT752 (Non PB) FOB Mother Vessel 67.00 $ USD 77.00 $ USD 90.00 $ USD
We find serious buyer for steam coal origint indonesia GCV 5800-5500 kcal/kg GCV 6500-6000 kcal/kg Shipping: fob or cfr Payment: lc at sigh Capacity supply: 50.000-300.000 mt per month
Product: Thermal Coal Type B Origin: Colombia Contract: 12months with an extension available for 36 months shipments every 20 days. Quantity: Starting 35.000 Tons / Month with the possibility to increase to 70.000 after 3 months and the possibility for more. Nearest Port: Port Tulu - Golfo de Morrosquillo Terms: EXW / 51.20 USD / Ton Payment: Irrevocable LC, Inspection: Bureau Veritas Colombia LTD Analysis Certificate available on request
Gross Caloric Value (GAD)ADB - FOB -5100-49005300-51005500-53005800-5600 Gross Caloric Value (GAR)ARB3500-32004000-3800 3800-36004200-40004800-4600 5000-4800 5200-5000 Total MoistureARB40-47% Max30-38% Max33-36% Max24-28% Max Inherent MoistureADB16-22% Max16-19% Max15-18% Max12-15% Max AshADB5-11% Max6-10% Max4-8% Max5-8% Max Volatile MatterADB38-45% approx38-45% approx38-45% approx38-42% approx Fixed CarbonADBBy differenceBy differenceBy differenceBy difference Total SulfurADB0.4-0.8% max0.5-0.8% max0.5-0.9% max0.4-0.8% Max HGI ADB45-60 approx45-60 approx45-60 approx40-50 approx Ash Fusion Temperature 1100 De C1150 De C1200 De C1250 De C Size (crushed)ADB0-50mm (90%)0-50mm (90%)0-50mm (90%)0-50mm (90%) Cash 43.00 $ USD44.00 $ USD47.00 $ USD58.00 $ USD Conditional SBLC/BG 45.00 $ USD46.00 $ USD49.00 $ USD60.00 $ USD DLC 100% at sight loading port 48.00 $ USD49.00 $ USD52.00 $ USD63.00 $ USD Gross Caloric Value(GAD)ADB - FOB -6000-58006300-61006500-6300 Gross Caloric Value (GAR)ARB5400-52005800-56006000-5800 Total MoistureARB18-22% Max14-18% Max12-16% Max Inherent MoistureADB9-12% Max9-12% Max6-10% Max AshADB8-14% Max12-15% Max10-14% Max Volatile MatterADB35-45% approx35-45% approx35-45 approx Fixed CarbonADBBy differenceBy DifferenceBy Difference Total SulfurADB1.0% max1.0% max1.0% max HGI ADB40-50 approx40-50 approx40-60 approx Size (crushed)ADB0-50mm (90%)0-50mm (90%)0-50mm (90%) Ash Fusion Temperature 1280 De C1300 De C1350 De C Cash 66.00 $ USD76.00 $ USD89.00 $ USD Conditional SBLC/BG 68.00 $ USD78.00 $ USD91.00 $ USD DLC 100% at sight loading port 71.00 $ USD81.00 $ USD94.00 $ USD Contact: Harry Johan Najoan
We offer 0-3 mm anthracite for barbecue briquette production. Hydroanthracite Total Moisture, (ISO 589) - 0.7 % Ash, (ISO 1171) - 4,4% Volatile Matter, (IS0562) - 2.8% Total Sulfur, (ISO 334) - 0.90% Fixed Carbon, - 92.1% Quantity 1000m / t per month
Product Description Using calcined anthracite coal carburizing agent and cast iron using carburizing agent steel, and other materials are also useful for adding to the carburant carburant is applied, steelmaking, iron carbon materials. High quality carburizing agent is essential to producing high quality steel auxiliary additives. Usage: For 1-5 T furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. which can make carbon additive fully absorbed. For greater than 5 T furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost. For 0-5 T furnace use: While a small amount molten iron in the furnace Or with some molten iron remained. add the carbon additive one-time Then add the other material Which can make carbon additive fully absorbed. For greater than 5 T furnace Mix proper carbon additive with charging material as suggested first, And then along with the increase of furnace charge down into the furnace inside gradually. That is, before the molten metal rising up to about 2/3 height of furnace All carbon additive shall be added It guarantees sufficient melting absorbing time before molten metal out, and improves the absorption of carbon.
Looking for a reliable supplier of bulk industrial materials? We offer competitive prices and efficient delivery on: Anthracite Coal: High-quality coal ideal for industrial processes and domestic heating. Iron ore Fe 62% min: Iron ore with a minimum iron content of 62%, perfect for steel production. Coal coke: Essential fuel for steelmaking and other industrial applications. â?¢ Peruvian Anthracite in bulk: Sourced directly from Peru, this anthracite coal is available for bulk orders. Urea: A key component in fertilizer production, also used in various industrial processes. Get in touch to discuss your specific needs and request a quote. Serhiy.Demyanenko gmail.com
Anthracite is the highest rank coal and is characterized buy low volatile matter (always less than 10%) and high carbon content. It has a semi- metallic luster and is capable of burning without smoke. Semi- anthracite is coal midway between low volatile bituminous coal and anthracite. (1-6 �?�?) Ash content for dry condition no more than 4 % Volatile substances no more than 3 % Moisture no more than 9.5 % Lowest heat of combustion (GCF) at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % (0.2-1 �?�?) Ash content for dry condition no more than 30 % Volatile substances no more than 6 % Moisture no more than 10 % Lowest heat of combustion at least 5,000 kcal/kg Total sulfur for dry condition no more than 1 % (6-13 �?�?) Ash content for dry condition no more than 4 % Volatile substances no more than 4 % Moisture no more than 8 % Lowest heat of combustion at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % Trivia Content no more than 18 % (13-25 �?�?) Ash content for dry condition no more than 5 % Volatile substances no more than 3.5 % Moisture no more than 6.5 % Lowest heat of combustion at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % Trivia Content no more than 17 %
We are trading company in indonesia. We have supply for GAR 4200 up to GAR 6000 Origin from south Kalimantan indonesia If you have inquiries, pls contact me
We are Coal Mining and Trading, ready to supply Steam Coal from South Kalimantan, Indonesia. Specification: GAR 4000-4200. Total Moisture 34.00-36.00 %. Inherent Moisture : 20.00-22.00 %. Ash : 4.00-6.00 %. Total Sulphur : 0.15-1.00 %. Volatile Matter : 38.00-46.00 %. Fixed Carbon : 40.00-42.00 %. Size : 0-50mm 90% min. HGI : 43.00-45.00. Supply Quantity : 50,000-100,000 MT/Month. Minimum Order Quantity : Barge about 7500 MT. Packaging : Bulk. Trade Terms : FOB, CFR. PRICE : ICI 4 (Indonesian Coal Index). Payment : LC at Sight or Cash/TT Terms 5.4.1. Loading Port Barge : Jetty Talenta Bumi, Marabahan-South Kalimantan. Port of Discharge : (Transhipment to Vessel) Taboneo Anchorage-South Kalimantan.
Product Specifications Type: Thermal Coal Origin: Tanzania Quantity: 6,000,000 Metric Tons Specifications: Moisture Content: < 4% Calorific Value: > 6000 kcal/kg Size: Crushed Coal, 0-50 mm Payment Terms: Accepted Methods: Documentary Letter of Credit (DLC), Standby Letter of Credit (SBLC), Letter of Credit (LC) (ONLY)
Origin: Indonesia. Available in CIF or FOB terms. Indonesian Coal grades ICI 1, ICI 2, and ICI 3 are classified based on their calorific values and other specifications. They are widely used in power generation and industrial applications due to their high energy content and low impurities.
Place of Origin : Indonesia Sulphur Content (%) : 0.35 Fixed Carbon (%) : 90 Volatile Matter (%) : 1.5 Coal Calorific : 6300-6100 Min. order : 1000 MT
If you have looking for request : send me I sell product : end buyer,valid buyer 1. Steam coal 2. Silica sand 3. Copper cathodes 4. En590, jet fuel 6. Sugar 7. Looking investor
Model No. CAC-01 CAC-02 CAC-03 CAC-04 CAC-05 Fixed carbon(Min) 90% 92% 93% 94% 95% Ash(Max) 8.50% 6.50% 5.50% 4.50% 3.50% Volaltie matter(Max) 1.50% 1.50% 1.50% 1.50% 1.50% Sulfur(Max) 0.30% 0.30% 0.30% 0.30% 0.30% Moisture(Max) 0.50% 0.50% 0.50% 0.50% 0.50% Size 1-3mm,1-5mm
