A10-7,A10-8,A42-7,A50,A22-8,A22-7,A20-5,A10-5,,A28-7,AA15-6,A15-7,A15-8, etc
A18-7,A9-7,A18-6,A, Jclamp,G2-8,G4-8,G22-8,G6-8,G12-8,A48-8,,A48-7,AA52-7A52-8,A44-8,AA44-7,A14-7,A14-8,A24-8,AA36-6 etc
Hope my email find you are well. We can produce many types of cable protector according to your drawings or specifications. And we can completed 5,000 ea cable protector within 10 days, completed 10,000 ea within 15 days, completed 20,000 ea within 25 days. Kindly let us know if have any needs, we will provide the best price and lead time. Looking forward to hearing from you. Best Regards.
OPGW Performed Helical Suspension Clamp The unique design of the lightweight HuaNeng Fitting mechanical suspension supports spans of optical ground wire (OPGW) cables through a wide range of line angle variations. HuaNeng Fitting's mechanical suspension is easy to install while supporting vertical, lateral, and longitudinal unbalanced loads and angular tension without damaging cable strands or affecting fiber performance. Separate bolts OPGW Suspension Clamp Suspension clamps are also known as overhanging wire clamps or overhanging fixtures. According to the use, opgw suspension clamp include ABC cable overhanging wire clamps, ADSS cable overhanging wire clamps, and overhead line overhanging wire clamps. Suspension wire clamp is a general term for all types of wire clamps that suspend wires or cables from a pole tower. Pre-twisted opgw cable clamps are used for the connection of OPGW cables and towers to reduce the static stress at the support point of OPGW cables, to improve the vibration resistance of ADSS cables, to buffer the dynamic stress of wind vibration, and to ensure that the cable bends within the permissible value, so that the cable does not produce bending stress, so that the optical fiber does not produce additional loss in the cable after installation.
OPGW Preformed Double Tension Clamp Preformed tension clamps are also named preformed dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC. A preformed dead end is a tension wire that has an important role in ADSS/OPGW transmission lines. Dead-end cable clamps are designed to connect ADSS/OPGW/OPPC to overhead towers or poles. Preformed Tension Clamp Preformed tension clamps are also named preformed dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC. A preformed dead end is a tension wire that has an important role in ADSS/OPGW transmission lines. Dead-end cable clamps are designed to connect ADSS/OPGW/OPPC to overhead towers or poles. The unique pre-formed tension clamp design not only simplifies installation, but also ensures a secure cable connection. Dead-end cable clamps provide superior performance to protect ADSS/OPGW/OPPC cables from stress point damage and prevent signal degradation during transmission. Pre-formed tension clamps for conductors and grounds are similar in appearance to pulling dead-end clamps, but the specifications, raw materials and strength requirements of the two types of pulling clamps do differ significantly. Although there are different design standards in different countries, we can OEM to customer requirements. As an experienced manufacturer and supplier of preformed tension clamps, Seinei understands the standards, the manufacturing process and understands your needs. If you have any questions, please feel free to contact us.
Fixing Clamps With Rubber
The bandwudth is divided into 9mm and 12mm.German style hose clamos are preferred by the European markets. The non-perforated and rolled band protects the soft-hoses surface from shearing during installation. this style of hose clamps is commonly used in automotive ,industrial,mining,marine and general hardware applications W1all of the band ,housing and screw is galvanized steel W2screw is galcanized steel,band and housing 200ss and 300ss W4All of the band ,housing and screw is 200ss and 300ss stainless steel
AMERICAN STYLE HOSE CLAMP The band width is divided to 8mm,10mm,12.7mm and 14.2mm. American style ose clamps are preferred by both North and South America Markets. Perforated band,with low installation torque and high break torque . This style of clamp is commonly used in gardening,agricultural,industrial.marine and general hardware application. W1 all of the band ,hosing and screw is galvanized steel W2 screw is galvanized steel .band and housing 200ss and 300ss W4 all of the band ,housing and screw is 200ss and 300ss stainless steel.
W1 all of the band ,hosing and screw is galvanized steel W2 screw is galvanized steel .band and housing 200ss and 300ss W4 all of the band ,housing and screw is 200ss and 300ss stainless steel.
Features: Inner surface has dual gripping ridges Bolts lugs are reinforced to prevent bending out of alignment Measure hose OD accurately before ordering clamps Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely affect clamp performance Model Number: DOUBLE BOLT CLAMPS SL22â??SL1275 Norms:DIN20039 Maxi W.:16/25bar Type: Hose Clamps (double bolt) two parts with overlapping cast-on-saddlesHose Clamps (double bolt) DIN 20039 A, two parts with loose saddlesHose Clamps (double bolt) DIN 20039 B, two parts with loose saddles and safety clawsMaterial: Metal, Iron or Carbon Steel Structure:Saddle Clamp, Saddle Clamp, Double Bolt Clamps Surface treatment:galvanized iron ,sand blast ,grin Color:yelllow colorful zinc,bule white zinc
Hope my email find you are well. We can produce many types of stamping and casting cable protector according to your drawings or specifications. We can completed 5,000 ea stamping cable protector within 10 days, completed 10,000 ea within 15 days, completed 20,000 ea within 25 days. Kindly let us know if have any needs, we will provide the best price and lead time for you. Best Regards.
Hope my email find you are well. We can produce many types of stamping and casting cable protector according to your drawings or specifications. We can completed 5,000 ea stamping cable protector within 10 days, completed 10,000 ea within 15 days, completed 20,000 ea within 25 days. Kindly let us know if have any needs, we will provide the best price and lead time for you. Best Regards.
ADSS Preformed Suspension Clamp The base is attached by a rear hinge for quick and easy installation of ADSS cables Cushioned pad made of UV resistant neoprene sleeve insert to gently hold the ADSS cable in place Includes stainless steel bolts and locking washers for locking clamps ADSS Suspension Clamp Suspension clamps are also called fixture suspension or suspension fittings. According to the application, the suspension clamps are divided into ABC optical cable suspension clamps, ADSS optical cable suspension clamps, and overhead line suspension clamps. ADSS Optical Cable Suspension Clamp Suspension cleats for ADSS cables are also known as prefabricated suspension cleats. Prefabricated catenary clamps that function the same as ordinary catenary clamps are designed to suspend conductors or ground wires in a vertical direction. Huaneng prefabricated suspension clamps are suitable for high voltage above 220kv. Unique features of prefabricated suspension clips: Effective protection of conductors Avoiding Electricity Waste Due to Corona easy installation Prefabricated suspension clamps are designed to protect ADSS (All Dielectric Self Supporting) cables from sloshing caused by wind currents. Suspended clamps are widely used in transmission lines, towers or power distribution systems. The distance between the two towers is called the span. For short spans, prefabricated suspension clamps with O-rings are often used. This kind of suspension clamp has the characteristics of lightest weight, convenient installation, and can protect ADSS optical cable more effectively. For mid-span and long-span, there is also a prefabricated suspension clamp that is aluminum-clad. The Armor Clip Suspension connects with U-Clips to hang cables. Aluminum-clad suspension clamps support and protect ADSS fiber optic cables from bending damage. According to the span, the short span adopts single suspension clamp, and the long span adopts double suspension clamp. Composition: inner pre-twisted wire, the outer pre-twisted wire, rubber insert, cast aluminum shells, right-angle shackle, U-type shackle. Purposes: supporting cable, make the ADSS hang on the tower.
ADSS with The DN Short-span Tension Clamp ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. Tension Clamp ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. The ADSS tension clamp is typically made of corrosion-resistant materials such as aluminum or plastic and is available in different sizes to fit various cable diameters. Composition: twisted wire, thimble, PH-type shackle, U-type shackle etc. Purposes: support all strain, make ADSS cable connect the strain pole and tower. Features: Preformed wire connect the pole and tower by thimbles etc. link fitting, afford the load of the transmission line. Grip strength not less than cable 95%RTS in case that not more than lateral pressure of the cable E xcellent aluminum clad steel improve the mechanical and resist-corrosion function, extend life. Corrosion-resistant materials such as aluminum or plastic to ensure durability and longevity. Gripping mechanism that securely holds the cable without causing damage. Tensioning mechanism that allows for adjustment of the cable tension. Insulating material to protect the cable from electrical currents. Suitable for use with a range of cable diameters. Easy installation and maintenance. Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods
ADSS Downlead Clamp DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. Downlead Clamp DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. The tower clamps consist of a stainless steel band and a rubber part. The stainless steel band is used to fix the rubber clip on the pole. At the same time, the rubber part fixes the optical fiber. This way, the fiber does not shake and at the same time reduces damage caused by friction. The lead wire clamps for towers have a different structure than the lead wire clamps for poles. The clamps consist of steel brackets, bolts and nuts, and rubber parts. The bolt secures the lead clip to the tower. Compared to other lead clip manufacturers, Jingyoung offers the end user a wide range of lead clip design options. huaneng lead clips can be custom manufactured with a wide range of cables, materials and different connection options.
Tension Clamp for Earth Wire Tension Clamp For Earth Wires are for use by trained craftsmen only. Dead-end clamps should not be used by anyone unfamiliar or untrained in their use. Wire Tension Clamp Tension clamps are designed to non-rigidly secure installation cables to brackets, fasteners on buildings, or utility poles. Cable clamps are installed at the beginning and end of cable runs, suspensions, branches and turns. Tension clamps can also be used where cables sag on large straight sections or form under the influence of increased tensile loads. The design of the products is simple. One of the most popular consists of a cone, a pair of plastic toothed wedges that act as clamping devices, and a steel ring. The principle of operation is simple and consists of self-tensioning the cable using the movable wedges of the clamp. The sale of tension clamps and their use significantly reduces the time and physical costs of installation work. This cable attachment element offers the following advantages There is no need to strip the insulation to expose the mating cable during use; Simple installation, reducing the possibility of errors; No special training of installers is required; No special tools are required to prepare cables for installation; Reduced risk of cable damage and compromised integrity.
ADSS Preformed Suspension Clamp The base is attached by a rear hinge for quick and easy installation of ADSS cables Cushioned pad made of UV resistant neoprene sleeve insert to gently hold the ADSS cable in place Includes stainless steel bolts and locking washers for locking clamps ADSS Suspension Clamp Suspension clamps are also called fixture suspension or suspension fittings. According to the application, the suspension clamps are divided into ABC optical cable suspension clamps, ADSS optical cable suspension clamps, and overhead line suspension clamps. ADSS Optical Cable Suspension Clamp Suspension cleats for ADSS cables are also known as prefabricated suspension cleats. Prefabricated catenary clamps that function the same as ordinary catenary clamps are designed to suspend conductors or ground wires in a vertical direction. Huaneng prefabricated suspension clamps are suitable for high voltage above 220kv. Unique features of prefabricated suspension clips: Effective protection of conductors Avoiding Electricity Waste Due to Corona easy installation Prefabricated suspension clamps are designed to protect ADSS (All Dielectric Self Supporting) cables from sloshing caused by wind currents. Suspended clamps are widely used in transmission lines, towers or power distribution systems. The distance between the two towers is called the span. For short spans, prefabricated suspension clamps with O-rings are often used. This kind of suspension clamp has the characteristics of lightest weight, convenient installation, and can protect ADSS optical cable more effectively. For mid-span and long-span, there is also a prefabricated suspension clamp that is aluminum-clad. The Armor Clip Suspension connects with U-Clips to hang cables. Aluminum-clad suspension clamps support and protect ADSS fiber optic cables from bending damage. According to the span, the short span adopts single suspension clamp, and the long span adopts double suspension clamp. Composition: inner pre-twisted wire, the outer pre-twisted wire, rubber insert, cast aluminum shells, right-angle shackle, U-type shackle. Purposes: supporting cable, make the ADSS hang on the tower.
We manufacture PVC,TPE and EPDM Profiles for pipe clamps in any sizes as our customer regusted.
Pipe Down Hold Clamps
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
