Cr2O3 = 48% basis/ 42% min Fe2O3 = 18 Max Moisture = 6 % max Size = 0 - 300mm plastic bag 30-45kg
Chrome ore
We have chrome 1000 tune 40 base or 42 persant
Hi-grade chromite ore (50% grade)
Chrome ore
Ferro chrome Cr60%min, c0.06%max, si1.50%max, p0.04%max, s 0.03%max 1mt wowen bag
What is ferrochrome? Ferrochromium is made using metallurgical grade chrome ore and can be divided into three categories, depending on the level of carbon in the alloy. The three types of ferrochrome alloys are: High-carbon (HC) ferrochrome (carbon content between 4% and 9%) Low- and medium-carbon (LC & MC) ferrochrome (carbon content less than 0.5% for LC and between 0.5% and 4% for MC) Ferrochrome-silico-chrome (FeSiCr) Ferrochrome applications: Production of steel, especially stainless steel with chromium content of 10 to 20%, is the largest consumer of high-carbon ferrochrome. Over 80% of the worldâ??s ferrochrome is used in the production of stainless steel. The vast majority of ferrochrome produced is� charge chrome, which has a lower chrome content ratio. Used most commonly in stainless steel. Low carbon� and� medium carbon� ferrochrome is used in the manufacture of special steels. Low carbon ferrochrome can be used to produce superalloys.
Chromite is a mineral composed of iron, chromium, and oxygen (FeCr2O4). It is a dark-colored mineral that is commonly found in ultramafic rocks, and it is the main source of the metal chromium. Chromite is highly valued for its high chromium content, as chromium is a critical component in the production of stainless steel and other alloys. It is also used in the production of refractory materials and pigments. Chromite is notable for its high melting point and resistance to corrosion, making it a valuable mineral for a variety of industrial applications. After extracting chromium from mines located in Pakistan and Afghanistan, our dedicated processing team meticulously assesses and grades the chromium ore lumps before delivering them to our esteemed customers. Our product range encompasses multiple grades, including: 1. Metallurgical Grade: With chromium oxide content ranging from 26% to 42% (Cr2O3), our metallurgical grade chromium ore is ideal for industries requiring high-quality raw materials for stainless steel production and alloy manufacturing. 2. Refractory Grade: Our refractory grade chromium ore boasts chromium oxide content between 48% and 54% (Cr2O3) while maintaining silica content at a maximum of 3.5%. This grade is well-suited for applications where high-temperature resistance is critical, such as refractory materials for furnaces and kilns. We take pride in successfully supplying these grades to various markets, including China and Europe, catering to the diverse needs of our clients. With a substantial monthly production capacity of 15,000 tons, Bare Syndicate stands as a dependable source for fulfilling industrial demands. In addition to our expertise in chromium extraction and processing, our extensive experience in logistics and international trade allows us to provide our customers with a comprehensive solution for their supply management needs.
We are suppliers of Chrome Ore of South African and Zimbabwe origins. Please contact us if you have requirements for this product. Thank you
Chemically classified as follows: - High grade Cr2O3 > 46%. - Medium grade 32- 46% . - Low grade 25- 32% .
Product description: Chrome ore Cr203 48% SiO2 14% Al 203 11% MgO 17% FeO 14.50 % Cr:Fe 2.95 : 1 S 0.009% P 0.005%
Product description: Chrome ore Cr203 48% SiO2 14% Al 203 11% MgO 17% FeO 14.50 % Cr:Fe 2.95 : 1 S 0.009% P 0.005%
Product description: Chrome ore Cr203 48% SiO2 14% Al 203 11% MgO 17% FeO 14.50 % Cr:Fe 2.95 : 1 S 0.009% P 0.005%
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.Itâ??s characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3â?¥75% Fe2O3â?¤3% K2Oâ?¤1% TiO2â?¤4% , the others: very low 2.Grain Shape: Ball 3.Colour: Brownish black 4.Density: 1.95-2.05 ( g/cm3) 5.Refractory temperature:1850â?? 6.Thermal expansion Rate:0.13% 7.Size: 10-20meshã??20-30meshã??30-40meshã??40-70meshã??100-140meshã??170mesh with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.Itâ??s characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very low 2.Grain Shape: Ball 3.Colour: Brownish black 4.Density: 1.95-2.05 ( g/cm3) 5.Refractory temperature:1850 6.Thermal expansion Rate:0.13% 7.Size: 10-20mesh 20-30mesh 30-40mesh 40-70mesh100-140mesh 170mesh
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3%
Ceramic Foundry Sand Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very
Chrome Concentrate 42% min and 44% max grade. Available 10 000 tons per month on 12 months contract. Price FOB Richards Bay South Africa.
Chrome Concentrate 42% grade. Available 1000 tons per month on 12 months contract. Price FOB Richards Bay South Africa
