Sand has no unique advantages in nature, but it has a wide range of uses after being dried by a sand dryer. River sand, yellow sand, sea sand, etc., these sands are divided according to the size of different particles, the particle size is different, the purpose of the sand is also completely different. There is no way to divide the sand when it is wet. At this time, you need to use a dryer to dry the sand and enter it into the linear vibrating screen. Through different screen meshes, the size of the sand is divided and stored separately.
Cr2O3 Sand Price/Chromite Sand/Cr2O3 Chromite (South Africa)
Chromite Sand is a naturally occurring spinel consisting primarily of the oxides of chrome and iron. It is a by-product of ferro-chrome production and is mainly used in foundry applications and in glass production.
Cr2O3:46.0%min
SiO2:1.0%max
FeO:26.5%max
CaO:.30%max
MgO:10.0%max
Al2O3:15.5%max
P:0.003%max
S:0.003%max
SIZES:AFS30-35 AFS35-40 AFS40-45 AFS45-50 AFS50-55 AFS55-60 AFS60-65
PACKING:1MT big bag
Chromite sand price/Cr2O3 sand Price AFS45-50
Chromite Sand is a naturally occurring spinel consisting primarily of the oxides of chrome and iron. It is a by-product of ferro-chrome production and is mainly used in foundry applications and in glass production.
Cr2O3:46.0%min
SiO2:1.0%max
FeO:26.5%max
CaO:.30%max
MgO:10.0%max
Al2O3:15.5%max
P:0.003%max
S:0.003%max
SIZES:AFS30-35 AFS35-40 AFS40-45 AFS45-50 AFS50-55 AFS55-60 AFS60-65
PACKING:1MT big bag
Chromite sand specification is as follows:
Originsouth africa
ItemIndex
Cr2O3â?¥46.0%
SiO21.0%
FeO26.5%
CaO0.30%
MgO10.0%
Al2O315.5%
P0.003%
S0.003%
Cr/Fe1.55:1
Bulk Density2.5-3
ColorBlack
PH7-9
The amount of the acid 2 ML
Percent soil0.1%
Percent Moisture0.1%
The sintered1600â??
Percentage of free acid present in the sand0
filling density 2.6g/cm
sintering point > 1800C
melting temperature 2180C
Regular size
AFS25-35 AFS30-35 AFS35-40 AFS40-45 AFS45-55 AFS50-55 AFS55-60 AFS60-65 AFS60-70
Packing:1MT big bag
Water sand characteristics
(1) cutting speed
(2) cutting surface more smooth, more direct
(3) no large particles of sand pipe (nozzle)
(4) fine grained garnet without void
(5) there is no dust, the dust affects the cutting effect and it is difficult to clean the waste after cutting.
Commonly used specifications
46# 60# 80#100# 120# 160# 24#
Use sand jet
60# products: stone cutting, part of ceramic tile, carbon steel cutting
80# products: ceramic tiles, carbon steel, aluminum, stainless steel, copper, titanium alloy and other cutting; part of the stone cutting; part of glass cutting, part of silicon, polycrystalline silicon cutting
80# products: glass cutting, silicon, polycrystalline silicon cutting; some ceramic tile, carbon steel, aluminum, stainless steel, copper, titanium alloy and other cutting
120# products: glass cutting, single crystal silicon, polycrystalline silicon cutting
43 Stones Slates Suppliers
Short on time? Let Stones Slates sellers contact you.
Counterweight iron sand.
The counterweight iron is a kind of iron ore raw materials in weight, its role is to balance. For example, the counterweight engineering machinery in sporting goods in weight.
For weight or pressure reuse of iron ore, iron ore, the proportion of general counterweight iron for 4.2 - 7.2 (bulk density of 2.5 - 4.8) between, customers are in terms of the drainage density (true specific gravity drainage density [1]). The product weight different needs of different proportion of the iron weight.
Counterweight iron sand density
The proportion of general counterweight iron for 4.2 - 7.2 (bulk density of 2.5 - 4.8) between, specifications: 0.2-2.0mm, customers often to drainage density (specific gravity), as the purchase of indicators. The product weight different needs of different proportion of the iron weight.
A small proportion of iron weight: 6.2-6.5 tons / m3 4.1-4.3 tons / m3 reactor
A large proportion of iron weight: 6.8-7.2 tons / m3 4.8-5.2 tons / m3 reactor
Physical and chemical index
Chemical composition
Content
Iron (fe)
More than 93%
Carbon (c)
Less than or equal to 0.50%
Manganese (mn)
Less than or equal to 1.20%
Silicon (si)
Less than or equal to 0.20%
Sulfur (s)
Less than or equal to 0.25%
Phosphorus (p)
Less than or equal to 0.05%
Counterweight iron sand use
1, sports and fitness activities counterweight
2, electric counterweight counterweight
3, concrete weight
4, the hull large mechanical engineering mechanical pressure
5, wear-resistant engineering, such as the airport runway, bridge pavement, pier, bridge, steel plant, etc..
Pearly sand
Perlite is a by acidic volcanic glassy lava through the broken, preheating, roasting and swelling and are made with porous structure, white, loose granular materials, which has the characteristics of small volume, low thermal conductivity, good chemical stability, non flammable, non-toxic, tasteless, sound-absorbing.
Pearly sand properties
1. Perlite is a adsorption ability is very strong material, it has good infiltration, infiltration of the pearlite sand surface is wet after the release of heat.
2 pearl sand is a small capacity, low thermal conductivity, good chemical stability of the material.
3 perlite or not flammable, non-toxic and tasteless, sound-absorbing material, has good effect in the industry.
Physical and chemical index
Component
Sio2
Al2o3
Fe2o3
Cao
Mgo
K2o
Na2o
Content
Seventy-five point four two
Fourteen point two six
One point zero one
One point seven two
Zero point three seven
Four point zero one
Three point two six
Pearly sand classification
One is the use of perlite building, the particles are relatively large, the intensity is relatively large. The other is the use of equipment insulation, mainly used to make filler, smaller particles, small strength, good thermal insulation.
Use of perlite
This product is mainly used for large ultra low temperature thermal engineering construction of the insulating layer, such as oxygen air separation unit, natural gas, liquid hydrogen, liquid nitrogen, liquid oxygen refrigerated transport such as travel. This product has good ultra low temperature thermal insulation performance.
The 1 is the perlite insulation materials, can be used to make some use of the roof insulation layer. Heat insulation effect is good, and some can also be used to make the use of crop cultivation soil configuration.
2 production of heat insulation brick used in the construction industry, etc..
3 making hand washing powder, washing powder of pearlite is other material cannot replace, structure and its screening is very strict.
Ceramsite sand
1, product introduction
Ceramsite is a kind of refractory particle with diameter of 0.020mm~2.00mm, mainly made of al2o3·sio2. It is ball-shaped particle made from fine bauxite , which is fused in high-temperature electric-arc furnace and sprayed to ball shape.
2, features of ceramsite
1.Perfectly round shape with higher fluidity improves fill-in efficiency while reducing the resin level
2.Smooth surface of spherical shape greatly improves collapsibility after pouring
3.Low gas evolution and high permeability ensures fewer or no defects
4.High refractoriness and little thermal expansion ensures no burn-on and deformation
5.Artificial sand ensures stable chemical and physical properties
6.Almost neutral ph value allows both acid and basic binder.
7.High durability ensures high reusability.
3, physical and chemical properties of ceramsite
ItemIndexItemIndex(%)
Bulk density(g/ cm³)1.79-1.95Al2o3>75%
Apparent porosity(%)1800Mgo0.23-0.7
Refractoriness under
Load (°c)1720Cao0.16-1.5
Thermal expansion rate%(10 minutes under 1000 °c))0.13Tio21.99-2.71
4, applications of ceramsite
1. Used in all types of foundry technique like resin-bonded sand, sodium silicate sand, and clay-bonded sand.
2. As core sand for making like jacket core, oil duct core and tappet core of engine.
3. Excellent replacement of chromite sand
4. As dry sand of sand box for epc process and v method of casting process.
Crusher, ball mill, sand making machine, grinding mill, sand and gravel production line, mineral processing line and other mining equipment.Manufacturer
