Item: GSW Steel Wire Rope Certificate Material: high carbon steel Galvanized steel wire size: Φ1.44mm-4.770mm. Strand size:7(1.44-4.2);19(1.44-3.5); 37(1.44-3.5) Tensile strength: different Grade from min.1470 N/mm2 to min.1960N/mm2. Zinc coating: According to ASTM A475 Class A. Packing: larger coil,as per customer's requirement A branch factory of HENGXING group(listed in 2007) Professional on Galvanized Strand manufacturing An annual output of 7wire :240,000 tons 19wire:120,000 tons 37wire:60,000 ISO management :ISO9001:2008 ISO18001 ISO14001 Exported countries: over 40 countries or regions
Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources. http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsahttp://en.hengxingchinese.com/
Hengxing is a trusted partner of steel cord solutions. (1)Meets the highest performance, safety, environment and cost criteria. (2)Not easily be punctured, Extends tire life. (3)Strong wear resistance and long service life. (4)Strong safety, low noise and good absorption. (5)High strength and heavy load, Lower costs, lower weight and higher fuel savings. Meets the highest performance, safety, environment and cost criteria Extends tire life Enhanced wire-to-rubber adhesion for higher safety Lower costs, lower weight and higher fuel savings http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsahttp://en.hengxingchinese.com/
China famous manufacturer brass coated steel wire hydraulic rubber hose steel wire (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
top quality factory price 0.28mm High tensile brass plated steel wire for Industrial hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to
galvanized steel wire 2.5mm Our galvanized steel & strand products have excellent mechanical properties. The vertical hot-dip galvanized technology ensures coating thickness. We employ the most experienced, talented, licensed engineers in the industry to design solutions for your application. 20 production lines for zinc coating and 34 lines for stranding wire ,with Independent test and research center, plus manufacturing facilities in Germany, Poland and Japan, give our customers unparalleled support and global reach. Galvanized steel strand is used for prestressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring Project, multi- storey industrial buildings, stadiums, coal mines and etc. Available size and type (1)Galvanized steel :Φ1.44-4.77 mm (2)Galvanized strand:3 wires,4wires,5wires,7wires,19wires,37wires (3)Armoring steel wire 0.9mm and above
Brass Coated Wire for Rubber Hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
High Carbon Galvanized Steel Wire Our galvanized steel & strand products have excellent mechanical properties. The vertical hot-dip galvanized technology ensures coating thickness. We employ the most experienced, talented, licensed engineers in the industry to design solutions for your application. 20 production lines for zinc coating and 34 lines for stranding wire ,with Independent test and research center, plus manufacturing facilities in Germany, Poland and Japan, give our customers unparalleled support and global reach. Galvanized steel strand is used for prestressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring Project, multi- storey industrial buildings, stadiums, coal mines and etc. Available size and type (1)Galvanized steel :Φ1.44-4.77 mm (2)Galvanized strand:3 wires,4wires,5wires,7wires,19wires,37wires (3)Armoring steel wire 0.9mm and above
People called cold drawn bar as CDB. Cold drawn is a kind of processing that using machine to draw the hot rolled bar to the shape acc to the mould , the hardness will increased after processing, the surface will be bright . It can be used in machine parts making , bolts, structure . Shape: Round, Square, Hexagon, Flat and other shape acc to your drawing. http://www.glorysteelwork.com/cold-drawn-steel-bar/ Materials: SS400/S20C/S45C
Solar Wafer Cutting wire Silicon Cutting Sawing Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity
Solar Wafer Cutting wire Silicon Cutting Sawing Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
3mm diameter galvanized steel wire 7/12 SWG Galvanized Stay Wire Gi Wire Weight Per Meter (1)Meets or exceeds ASTM Specifications A475 or A363 or ASTM B498 or BS EN 50189; (2)Clean and firm hot-dip zinc coating; (3)Shining surface ; (4) Excellent corrosion resistance. Our galvanized steel & strand products have excellent mechanical properties. The vertical hot-dip galvanized technology ensures coating thickness. We employ the most experienced, talented, licensed engineers in the industry to design solutions for your application. 20 production lines for zinc coating and 34 lines for stranding wire ,with Independent test and research center, plus manufacturing facilities in Germany, Poland and Japan, give our customers unparalleled support and global reach. Galvanized steel strand is used for prestressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring Project, multi- storey industrial buildings, stadiums, coal mines and etc. Available size and type (1)Galvanized steel :Φ1.44-4.77 mm (2)Galvanized strand:3 wires,4wires,5wires,7wires,19wires,37wires
2mm diameter galvanized steel wire 7/12 SWG Galvanized Stay Wire Gi Wire Weight Per Meter (1)Meets or exceeds ASTM Specifications A475 or A363 or ASTM B498 or BS EN 50189; (2)Clean and firm hot-dip zinc coating; (3)Shining surface ; (4) Excellent corrosion resistance. 2mm diameter galvanized steel wire Our galvanized steel & strand products have excellent mechanical properties. The vertical hot-dip galvanized technology ensures coating thickness. We employ the most experienced, talented, licensed engineers in the industry to design solutions for your application. 20 production lines for zinc coating and 34 lines for stranding wire ,with Independent test and research center, plus manufacturing facilities in Germany, Poland and Japan, give our customers unparalleled support and global reach. Galvanized steel strand is used for prestressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring Project, multi- storey industrial buildings, stadiums, coal mines and etc. Available size and type (1)Galvanized steel :Φ1.44-4.77 mm (2)Galvanized strand:3 wires,4wires,5wires,7wires,19wires,37wires
3mm diameter galvanized steel wire 7/12 SWG Galvanized Stay Wire Gi Wire Weight Per Meter (1)Meets or exceeds ASTM Specifications A475 or A363 or ASTM B498 or BS EN 50189; (2)Clean and firm hot-dip zinc coating; (3)Shining surface ; (4) Excellent corrosion resistance. Our galvanized steel & strand products have excellent mechanical properties. The vertical hot-dip galvanized technology ensures coating thickness. We employ the most experienced, talented, licensed engineers in the industry to design solutions for your application. 20 production lines for zinc coating and 34 lines for stranding wire ,with Independent test and research center, plus manufacturing facilities in Germany, Poland and Japan, give our customers unparalleled support and global reach. Galvanized steel strand is used for prestressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring Project, multi- storey industrial buildings, stadiums, coal mines and etc. Available size and type (1)Galvanized steel :Φ1.44-4.77 mm (2)Galvanized strand:3 wires,4wires,5wires,7wires,19wires,37wires (3)Armoring steel wire 0.9mm and above http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsahttp://en.hengxingchinese.com/
0.8mm copper coated steel wire for Rubber Hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
0.8mm copper coated steel wire for Rubber Hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsahttp://en.hengxingchinese.com/
The breaking strength of diamond wire is high and stable; the diamond particles is well distributed and and no agglomeration, to keep the diameter of diamond wire uniform withdifferent diamond density; strongbonding force of plating ,and there's no peeling and cracks; the coating is compact and smooth, the appearance looks silver andbeautiful.
0.8mm copper coated steel wire for Rubber Hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsahttp://en.hengxingchinese.com/
High quality copper coated steel wire manufacturer (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsahttp://en.hengxingchinese.com/
High quality copper coated steel wire manufacturer (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsahttp://en.hengxingchinese.com/
