Led light.
Garlic bulbs, fresh and dried garlic cloves, garlic flakes, garlic granule, garlic powder, carrot granule, fresh and dehydrated ginger.
LED tube, LED light, LED lighting.
Gas alarm, LPG gas leak alarm detector, nature gas leak alarm detector, gas transmitter, dew point meter, SF6 gas recovery.
LED light box, aluminum frame light box, snap frame LED light box, crystal LED light box, double sided light box.
Radio remote control, telecrane remote control, wireless remote control, crane remote control, telemetry systems.
LED advertising vehicle.
LED lighting products such as LED street light, LED bulb, LED tube, LED panel light, LED tunnel light, LED wash wall light, LED par.
LED lighting, LED ceiling light, LED desk lamp, LED pendant lamp.
High, low power universal LED fixture, T8 tube light, LED panel lighting, LED modular, slim linear light.OEM & ODM
Gpsglonass antennas, gps receiver modules, 5g antennas, combo antenna, gsm/3g antennas, 4g/lte antennas, 433mhz and 868mhz antennas, tv antennas, mimo antennas, wifi antennas, wlan and wimax antennas, various connectors and cables assembly.
sic element is a kind of non-metal high temperature electric celement. It is made of selected super quality green silicon carbide as main material, which is made into blank,silicided under high temperature and re-crystallized. Compared with metal electric heating element ,this kind of element is characterized by high-applied temperature, anti-oxidization, anti-corrosion, long service life ,little deformation ,easy installation and maintenance. Therefore, it is widely used in varilus high temperature electric furnaces and other electric heating devices ,such as in the industries of magnet, ceramics ,powder metallurgy, glass ,metallurgy and machinery,etc
Place of Origin:China Brand Name:Feihui Model Number:F2 Series Size:For 86x86, 86x90 mm Max. Current:16A Max. Voltage:250V Mechanical Life:40000 times Type:Wall Light Switch And Socket Outlet Standard:BS/UK/British Function:OEM ODM, Customized Logo Fit for:110V-250V, 250 volt Material:Fireproof PC Panel, Steel Frame/ Metal Frame Contactor Material:Ag-Ni Alloy Copper Material:Tin Phosphor Bronze/ Brass/ Cu Color:Golden Panel Or Customized Certificate:CCC CE etc.
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor. Performance Detection range: 0.05-1m Accuracy: 0.1 level Pressure range: as required Probe diameter: 16 Supply voltage: 12-28VDC Medium temperature: -50-125 Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Place of Origin: Henan, China Brand Name: Comen Model Number: J638-1D Theory: Resistance Sensor Accuracy:99.9% Material: TPU MOQ: 1 Piece Length:3 meters Resistance:2.25k Connector:2 pin Color: Gray Packing: Individual pack, 1piece/bag Sample: Avaliable Other Service: OEM&ODM Cable diameter:Adult:3.0mm Pediatric:2.5mm Neonatal:2.0mm Keyword:Comen,Pediatric,Rectal/Esophageal, temperature sensor probe Temperature test range: 25 ~ 45 ; Accuracy: ±0.1°C from 25 to 45°C. Application site: Skin surface,Rectal/Esophageal Application: Adult, Pediatric, Neonatal Compatinle models:Use for Comen and Biolight monitor. Types: 1.Adult Rectal/Esophageal temperature probe; 2.Adult Skin surface temperature probe; 3.Pediatric Rectal/Esophageal temperature probe; 4.Pediatric Skin surface temperature probe; 5.Neonatal Rectal/Esophageal temperature probe; 6.Neonatal Skin surface temperature probe. Port:Shenzhen Delivery Time:3-5 days Supply Ability: 1000 Piece/Pieces per Week. Packaging Details:Separate package,then put in outer box. Payment Terms:L/C,D/A,D/P,T/T,Western Union,Money Gram Shipping Methods: 1. By express (DHL, FedEx, UPS, TNT, EMS, China Post), Door to door service. Takes about 5-7 days on the way. 2. By air, send order to airport. Have to pick up order at airport and do custom clearance. Takes about 3-5 days on the way. 3. By sea. Send order to seaport. Have to pick up order at seaport and do custom clearance. Takes about 1 month. Our Services 1.More competitive factory price. 2.Fast delivery (1-5 days, we are a manufacturer, have enough products in stock.) 3.Quality 100% assured (All products are made of medical TPU material) 4.Samples available (accept trial order) 5.One piece MOQ is acceptable. 6.OEM & ODM service. Warranty Period: All Spo2 Products 12 months ECG and EKG Products 6 months NIBP Hoses & Cuffs 3 months Temperature Probes 6 months IBP Products 6 months Ultrasound/TOCO/Fetal Probes 6 months O2 Sensor 12 months Main Products: 1.Reusable/ Disposable Spo2 Sensor 2.Spo2 Extension Cable 3.ECG/ EKG Cable with leadwires 4.ECG /EKG Trunk Cable 5.Temperature Probe 6.Fetal & TOCO Transducer 7.IBP Cable and Transducer 8.NIBP Cuff and hose
CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor. CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1 Performance Detection range: 0.05-1m Accuracy: 0.1 level Pressure range: as required Probe diameter: Φ16 Supply voltage: 12-28VDC Medium temperature: -50-125 Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Short Description: CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation. Detection range: 0.05 -5m Accuracy: 0.1, 0.2, 0.5 Pressure range: -0.1MPa-32MPa Probe temperature resistance: -50 -250 Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier) Fixing method: Thread mounting M20�1.5,M27�2,M18�1.5,M16�1 Flange mounting DN25, DN40, DN50. Special specifications can be customized according to requirements Probe diameter: Φ 12 , Φ 16 , Φ 25 Explosion-proof grade: Intrinsic Exia II CT6 Explosion-proof Exd II CT5 Protection level: IP65 Intrinsic safety parameters: Ui : 28VDC , Ii : 93mA , Pi : 0.65W , Ci : 0.042uf , Li : 0mH CR -6062 industrial grade fuel level transmitter (fuel level sensor) for occasions CR -6062 Standard Fuel Level Transmitter (Fuel Level Sensor) Industrial grade, suitable for measurement of viscous fuel quality below 5MPA and temperature below 200, can be connected with various protocols CR -6062 Compact fuel level transmitter (fuel level sensor) Industrial grade, suitable for measurement below 5MPA, temperature less than 200, low viscosity fuel, can be connected with various protocols
Product model CR606S In order to simplify the users construction process, save installation time and reduce the users construction cost, we developed this digital fuel sensor with on-site interception. The sensor is supplied with several standard lengths at the factory. The user does not have to measure the fuel tank one by one, and the sensor is cut to the required length according to the actual height of the fuel tank at the installation site. After the sensor is cut off, the sealing plug is installed to reset the zero point and the full point, the sensor can work normally and the automatic calibration can be realized in the future operation. This technology is the first in the industry. Range description Adaptive point range:(max to min)226 type:70% to 30% 424 type: 50% to 30% Accuracy class: 226 type: ± 2.5% 424 type: ± 2.0 Aluminum tube Ï?16
Product Categories: Monitor accessories Place of Origin: Henan, China (Mainland) Brand Name: CSI Connectors: 6 pin Cable Material: Medical TPU Cable Color: Gray Cable Length: 0.9 meters MOQ:1 piece Certificate: CE, ISO13485 Warranty: 12 months Types: 1.Adult disposable spo2 sensor 2.Pediatric disposable spo2 sensor 3.Neonatal disposable spo2 sensor 4.Foreahead Spo2 Sensor Feature: Latex-free, double shielded, antistatic, low noise. Supply Ability:1000 Piece/Pieces per Week. Shipping and Packing: Delivery Time: 3-5 days Shipping: DHL/FedEx/EMS/UPS/TNT Packing: 1 piece pack into one PU bag, then pack inside a small carton box. Port: Shenzhen port, or as you need. Payment Terms: L/C,D/A,D/P,T/T,Western Union,Money Gram. Company Information: Henan Joysjoin Industrial Co., Ltd is the professional manufacturer and exporter for medical consumables, who has our own R&D team, production line and sales team. Our main products are spo2 sensor, ECG cables and lead wires, EKG cable and lead wires, IBP cables, NIBP cuffs, medical temperature probes, anesthetic breathing machine sensors and tubes and other consumables, which are widely used in medical devices such as patient monitors, fetal monitors, electrocardiographs, breathing machines, anesthesia machines, and ultrasonic machines. Welcome your inquiry, looking forward to cooperating with you. Our Services: 1. More competitive factory price. 2. Fast delivery (1-5 days, we are a manufacturer, have enough products in stock.) 3. Quality 100% assured (All products are made of medical TPU material) 4. Samples available (accept trial order) 5. One piece MOQ is acceptable. 6. OEM & ODM service. Main Products: 1.Reusable/ Disposable Spo2 Sensor 2.Spo2 Extension Cable 3.ECG/ EKG Cable with leadwires 4,ECG /EKG Trunk Cable 5.Temperature Probe 6.Fetal & TOCO Transducer 7.IBP Cable and Transducer 8.NIBP Cuff and hose FAQ: 1. Are you a trading company or a manufacturer with your own factory? We are a professional manufacturer with our own R&D team. 2. Can I have my own Logo on the product? Yes, your own drawing is welcomed. We can design and make your logo on the product, but the cost need to be paid by your side. 3. Can we visit your factory? Of course. Welcome to visit our factory. Our professional technicians are willing to show you more details of our products. 4.What kind of certificates do you have ? We are certified with CE and ISO13485. Its our duty to offer you high quality products with best service and the most competitive price. 5. When can you deliver products? It depends on the quantity. Most of our products are in stock. For common orders, we can arrange shipment immediately after we get your payment.
Product Categories: Monitor accessories Place of Origin: Henan, China (Mainland) Brand Name: GE Connectors: 9 pin Cable Material: Medical TPU Cable Color: Gray Cable Length: 0.9 meters MOQ:1 piece Certificate: CE, ISO13485 Warranty: 12 months Types: 1.Adult disposable spo2 sensor 2.Pediatric disposable spo2 sensor 3.Neonatal disposable spo2 sensor 4.Foreahead Spo2 Sensor Feature: Latex-free, double shielded, antistatic, low noise. Supply Ability:1000 Piece/Pieces per Week. Shipping and Packing: Delivery Time: 3-5 days Shipping: DHL/FedEx/EMS/UPS/TNT Packing: 1 piece pack into one PU bag, then pack inside a small carton box. Port: Shenzhen port, or as you need. Payment Terms: L/C,D/A,D/P,T/T,Western Union,Money Gram. Company Information: Henan Joysjoin Industrial Co., Ltd is the professional manufacturer and exporter for medical consumables, who has our own R&D team, production line and sales team. Our main products are spo2 sensor, ECG cables and lead wires, EKG cable and lead wires, IBP cables, NIBP cuffs, medical temperature probes, anesthetic breathing machine sensors and tubes and other consumables, which are widely used in medical devices such as patient monitors, fetal monitors, electrocardiographs, breathing machines, anesthesia machines, and ultrasonic machines. Welcome your inquiry, looking forward to cooperating with you. Our Services: 1. More competitive factory price. 2. Fast delivery (1-5 days, we are a manufacturer, have enough products in stock.) 3. Quality 100% assured (All products are made of medical TPU material) 4. Samples available (accept trial order) 5. One piece MOQ is acceptable. 6. OEM & ODM service. Main Products: 1.Reusable/ Disposable Spo2 Sensor 2.Spo2 Extension Cable 3.ECG/ EKG Cable with leadwires 4,ECG /EKG Trunk Cable 5.Temperature Probe 6.Fetal & TOCO Transducer 7.IBP Cable and Transducer 8.NIBP Cuff and hose FAQ: 1. Are you a trading company or a manufacturer with your own factory? We are a professional manufacturer with our own R&D team. 2. Can I have my own Logo on the product? Yes, your own drawing is welcomed. We can design and make your logo on the product, but the cost need to be paid by your side. 3. Can we visit your factory? Of course. Welcome to visit our factory. Our professional technicians are willing to show you more details of our products. 4.What kind of certificates do you have ? We are certified with CE and ISO13485. Its our duty to offer you high quality products with best service and the most competitive price. 5. When can you deliver products? It depends on the quantity. Most of our products are in stock. For common orders, we can arrange shipment immediately after we get your payment.
