Paper making machine is the general name of a complete set of equipment that makes the pulp form the paper web. It includes the headbox, wire section, press section, drying section, calender, paper reel, and transmission section. , Vacuum, lubrication, heat recovery and other auxiliary systems. Toilet paper roll machine makes paper pulp water suspension that meets the requirements of papermaking through the processes of filter dehydration forming, mechanical extrusion dehydration and drying. The tissue paper making machine production line includes the three main parts of forming, pressing and drying to complete the above process, and is equipped with the necessary finishing, coiling and transmission devices, as well as the circulation of pulp, pulp and white water, vacuum, ventilation and exhaust. Paper handling and lubrication, automatic control and other auxiliary systems. The specifications of the paper machine are often expressed in terms of the paper width (referred to as the paper width), the width of the copper net and the optimal working speed. The cutting width of modern large paper machines can reach 11m, the working speed can reach 1000m/min or more, the daily output of paper can reach hundreds of tons, and the weight of the whole machine can reach more than 1,000 tons, which is more than 100 meters long. In general developing countries and in the production of some special papers, small paper machines are more commonly used, with a width of 1 to 3 m and a working speed of tens of meters to 200 meters per minute.
The fully embossed toilet paper machine adds a set of embossing rollers to the original toilet paper rewinder to make the paper soft, absorbent, and soft to the touch. It is a new generation of embossed and perforated toilet paper rewinder. The main paper is embossed. The toilet paper rewinder embossing, perforating, and winding into roll paper, the embossing pattern is clear and beautiful, the spiral knife perforates neatly, the knife is small, the noise is low, the paper roll tension can be adjusted at will, and the electronic counting device can ensure the paper roll diameter Consistent. Features of toilette paper machine: 1. The embossing device adopts a point-to-point double-sided embossing system to make the finished product have the same double-sided effect, soft hand feeling, clear and beautiful embossing. 2. The embossed toilet paper rewinder is equipped with coreless, solid, and rolled paper tube toilet paper, which can switch between products in an instant, and can also be selected according to user needs. 3. Pneumatic belt feeding of embossed toilet paper rewinder, tension adjustment mechanism for rewinding shaft and raw paper for each shaft.
Office paper ream machine: 1. This equipment uses a servo motor (stepping motor) to control fixed length cutting and feeding. Equipped with photoelectric, deviation correction and tracking correction system, it can cut the product while cutting it horizontally, and carry out synchronous tracking and feeding mechanism, blowing and suction synchronous conveying, automatic sorting, manipulator automatic retracting and unwinding, and horizontal conveying to the worktable. 2. The transmission system adopts centralized control such as pneumatic system and photoelectric sensor, and the discharge system adopts hydraulic lifting device. This machine integrates photoelectric, liquid and gas, adopts PLC computer control, easy operation, high cutting precision, mechanical stability, and low noise. 3. Motor frequency conversion speed regulation, automatic calculation, tension digital display and other functions. 4. All transition rolls can be treated with ideal surface damage prevention according to customer process requirements. 5. This equipment has played an important role in the scratch of high-gloss photo paper.
Three target magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable. This device can be used for preparing single-layer or multi-layer ferroelectric thin films, conductive films, alloy films, semiconductor films, ceramic films, dielectric films, optical films, oxide films, hard films, PTFE films, and the like. Compared with similar equipment, this three-target magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation, and is an ideal equipment for preparing material films in a laboratory.
Brief introduction of this N95 mask make machine: This machine is a semi-automatic KN95/N95 mask making machine. Including automatic feeding, cutting, built-in nose bridge, ultrasonic fusion, slicing and other automatic features.It has the characteristics of simple operation, stable operation and flexible production process. Main features of this N95 mask make machine 1.One person can operate several machines, reducing labor cost and saving time. 2.Manual feeding, automatic cutting, automatic welding and automatic blanking are safe and convenient. 3. Adopt double-position ultrasonic welding technology, which has high efficiency, high cost performance and high stability. 4.Automatic welding of butterfly mask lugs can quickly replace positioning fixture to adapt to the production of various types of butterfly masks. 5. N95 mask roll mould adopts international high-end material, precision manufacturing, high precision and stable operation. 6. The masks produced have great filtration effect, perfectly fit face of people and are comfortable to wear without causing any pressure .
Three targets DC magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable. There are 1-inch or 2-inch magnetron targets for you to choose. Customers can choose the target according to the size of the substrate to be coated. The device is equipped with 500W DC power supply. The DC power supply can be used for the preparation of metal film. The three targets can meet the needs of multi-layer or multiple coatings. If customers have other coating needs, DC power supply and pulse power supply can be customized. Various types of power supply are available from 300W to 1000W in various specifications. The coating machine is equipped with two-channel high-precision mass flowmeter. If you have other requirements, you can customize the gas path of up to four-channel mass flowmeters to meet the complex gas environment construction requirements. The instrument is equipped with advanced turbomolecular pump sets, the ultimate vacuum is up to 1.0E-5Pa, and other types of molecular pumps are available for purchase. Molecular pump gas path is controlled by multiple solenoid valves, you can open the chamber to take out the sample without shutting down the pump, greatly improving your work efficiency. This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency.
Main Advantages of Biochemistry Analyzer : 1.New concept and more friendly software. 2.New techniques and spare parts used for much better quality and function. 3.Automatic washing station for both sample and reagent probe. 4.Liquid level detection and collision protection for both sample and reagent probe 5.Reliable cooling system for reagent chamber. 6.Powerful reaction cuvette washing system. 7.ISE module and barcode scanner(option). 8.Lower waste and more environment friendly. 9.New concept test control system available(on request). Model YJ-250 Biochemistry Analyzer Assay Model Random Access with direct reading syatem Method End point,Kinetic,Fixed time,Immunoturbidimetry,1-2 reagent,Multistandard,reagent/serum blank,etc Assay Item 40 assay ISE mould (Na+ ,K+, Cl- /LI*) available on request Throughput 1Reagent 257 tests/hour 2Reagent 150 tests/hour With ISE +120 tests/hour Test Menu T.BILI r-GT/GGT CHO Ca APOB-1/B CHE D.BILI ALP/AKP TG CL APOB CREA TP UREA CK P CK-MB Mg ALB CREA LDH C ASO AFU Lactic Acid ALT/GPT UA a-HBDH CO2 FMN LP(a) AST/GOT GLU AMY LDL-C HDL-C CHE LA TBA ADA HA-CRP PA FE Cu Zn C3 C4 lgG IgM lgA and drug ,toxicity ,etc Sample Position 60
CY-AFA-L1000 compact automatic drying tape casting coater is mainly used for laboratory coating of liquid or colloidal film. The film applicator is made of stainless steel with a constant weight to improve the uniformity of film. The device adopts bottom heat-able vacuum chuck up to 120�°C, so that the film is quickly dried. It has a scraper stopper, which can adjust the length of the coated film arbitrarily, and the scraper automatically resets when it reaches the limit. The upper cover has the functions of dustproof and heat preservation, and at the same time makes the device more beautiful. Features: 1. This equipment adopts a continuously variable motor to precisely control the coating speed. 2. The cross-bar can be used to push the adjustable scraper. There is no special requirement for the size of the adjustable scraper. 3. The waste collection box placed on the left edge of the vacuum chuck bed collects spare slurry to ensure the equipment itself and the surrounding area are clean. 4. The bottom intelligent vacuum heating chuck plate and digital display temperature control drying system can adapt to the development of science and technology of film formation under high temperature.
This equipment is multi arc ion coating equipment. Multi arc ion plating uses gas discharge or partial dissociation of evaporated materials to deposit evaporated or reactive materials on the substrate at the same time of bombardment by gas ions or particles of evaporated materials. The equipment is equipped with two multi arc targets, which are arranged on both sides of the cavity. With the planetary sample table, the coating efficiency can be effectively improved and the film forming effect can be improved. Features: 1. The coating instrument also adopts the integrated design, the cavity and the electric control part are left and right separated, realizing the separation of water and electricity, and effectively ensuring the safety of users. 2. The combination of glow discharge, plasma technology and vacuum evaporation can not only improve the film quality, but also expand the application of the film. 3. It has the advantages of fast evaporation rate, strong adhesion, good diffraction and wide film material. It is very suitable for hard protective coating such as TiN. 4. At the same time, the color of the film can be changed by controlling the atmosphere, and the film is firmly combined with the substrate, so it can also be used to make decorative films of various colors.
The small plasma sputtering and evaporation two-in-one coating machine is equipped with DC sputtering target and thermal evaporation assembly, which can not only be used for metal film plating by plasma sputtering, but also obtain carbon or other metal elemental films by evaporation. The instrument components are highly integrated, which realize two kinds of coating functions in the same chamber. This coating machine adopts high purity quartz chamber as vacuum chamber, and the coating process is completely visible. The instrument is equipped with two stage rotary vane vacuum pump, which can quickly reach the vacuum degree of 1.0E-1pa, and can meet the vacuum environment required by most evaporation coating experiments and diode sputtering experiments. This instrument has small size which can save space and can be used on the test bench. One machine has multiple purposes, which is cost-effective and very suitable for major universities and research institutions to choose. Small two-in-one coating machine applications: Scanning electron microscope sample surface gold spraying, gold steaming carbon spraying and other operations, as well as the production of non-conductor material test electrode.
The magnetron sputtering/vacuum evaporation composite coating equipment combines magnetron sputtering technology and vacuum evaporation technology in one coating equipment. In this device, magnetron sputtering cathode glow discharge is used to sputter the target atoms and partially ionize and deposit them on the substrate to form a film, and at the same time, the metal plating material can be melted in a vacuum by resistance heating and vaporized and then deposited on the substrate to form a film. This increases the utility and flexibility of the device. The equipment is used for metallization of plastic surface such as mobile phone case and deposition of non-conductive film and electromagnetic shielding film. The magnetron sputtering/vacuum evaporation composite coating equipment is equipped with a plasma processing device, a high-efficiency magnetron sputtering cathode and a resistance evaporation device, etc. The deposition rate of this device is fast, the coating adhesion is good, the plating layer is fine and compact, the surface finish is high, the uniformity and consistency is good; the machine realizes full automatic control of coating process, large load, reliable work, high qualification rate, low production cost and green environmental protection. The device is widely used in computer casings, mobile phone cases, household appliances and other industries, and can be coated with metal film, alloy film, composite film layer, transparent (translucent) film, non-conductive film, electromagnetic shielding film and the like.
Double target magnetron sputtering coater is a small laboratory coater with two targets developed by our company. It can be used to prepare single or multi-layer ferroelectric film, conductive film, alloy film, semiconductor film, ceramic film, dielectric film, optical film, etc. Compared with ordinary plasma sputtering, magnetron sputtering has the advantages of high energy, high speed, high coating rate and low sample temperature rise, which is a typical high-speed low-temperature sputtering. The magnetron target is equipped with a water-cooled inter layer, the water cooler can effectively take away heat, avoid heat gathering on the target surface, and make the magnetron coating work stably for a long time. In addition, the device is also equipped with bias power supply, which can add bias electric field between the target and the sample platform, enhance the energy of ions, improve the film quality and adhesion of the film. The whole machine adopts touch screen control, one key coating procedure, simple operation, and is an ideal equipment for preparing thin film in the laboratory.
Desktop single target head magnetron coater is a high cost performance magnetron sputtering coating equipment independently developed by our company, which has the characteristics of miniaturization and standardization. The magnetron target can be selected from 1 inch and 2 inches, and customers can choose according to the size of the substrate to be plated; the power supply is 150W DC power supply, which can be used for metal sputtering coating. The coating instrument is equipped with a vent interface, which can be filled with protective gas. If the customer needs to mix gas, you can contact the staff to configure a high-precision mass flow meter to meet the needs of the experiment. The instrument is equipped with advanced turbo molecular pump set, the ultimate vacuum can reach 1.0E-5Pa, and other types of molecular pumps are also available for purchase. Desktop single target magnetron coater application range: The equipment can be used to prepare single-layer ferroelectric films, conductive films, alloy films, etc. Compared with similar equipment, this single-target magnetron sputtering coating instrument is compact in design, highly integrated, compact, and can be placed on a table for use. It is an ideal equipment for preparing material films in the laboratory.
The sand washing machine for quartz sand and silica, is a kind of wheel bucket type washing and screening equipment, can clean and separate sand stone and clay materials, with functions of cleaning and dehydration. XSD series bucket type sand washing machine is a kind of high efficient washing and screening equipment equipped with VCâseries impact crusher (sand making machine). Performance Features 1.Sand washing machine is of simple structure. The bearing device of impeller drive is separated from water and materials with water, to avoid in a large degree that the bearings are damaged by being soaked with water, sand or some polluted things. 2.When sand washing machine is used for cleaning sand in quarries, it has many advantages compared with the traditional spiral one. 3.There is little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as "sand for construction" and "cobble and broken stones for construction". 4.There are no other wearing parts except the screen mesh. 5.It features of long service life and few times for maintenance. Contact Us Fangda Industrial is a famous sand washing machine supplier in China, and the price is competitive. Welcome customers to visit for cooperation. Please feel free to contact us!
Ice Cream Waffle Cone Production Line: There is one piece of waffle each baking plate. It can make the cones within 185mm length. And GELGOOG can design and make other models and specifications according to the different requirements from the clients. waffle cone making machine
This grain dryer use forced dispersion devices and multi-vessel rotary valve to keep quantitative circulation feed, drying on the thin layer to keep seeds and grain to be dried sufficiently. Big suction fan to make high drying efficiency. It use low temperature to do the dryer working, can make the good quality grain seed, and high quality seed. Use grant screw conveyor, PVC steel bucket, stainless steel mesh sieve to keep durability. our grain dryer use grant screw conveyor, PVC steel bucket, stainless steel mesh sieve to keep durability.
Double mode fertilizer granulator combines several advanced fertilizer extrusion technology together. It is one of the most popular fertilizer equipment in organic fertilizer production process. The double mode extrusion granulator is a collection of flat die extrusion technology, ring die extrusion technology, and screw extrusion technology. It has a wide raw materials application. Organic waste, such as filter mud, alcohol, starch, animal husbandry, can be granulated into organic fertilizer and bio fertilizer. This fertilizer granulation machine is widely used not only in organic fertilizer production process, but in food, feed, bio-fuel and other chemical industry.
Roll extrusion granulator suits to dry materials with moisture content below 8%, used in compound fertilizer production line to produce NPK compound fertilizer and Urea. Dry powder (8% moisture content) is extruded and granulated by roll extrusion fertilizer granulation machine which adopts dry extrusion technology, making materials be standard fertilizer granules. After being extruded by two rollers, raw materials, space between which are squeezed to minimum value, become caky ones. The density of materials are multiplied several times.
The grinding table is one of the key parts of vertical roller mill. It includes drag rings, segments (lining plate) and bases. The optimization and improvement are made by us on the traditional grinding table casting technology, that the most advanced sodium silicate-bonded sand molding technology, to overcome the deficiencies in structure and enable the grinding base to bear force equivalently. All of these avoid the problem of materialâ??s washout on the surface with low wear resistance.
Product Description Rotary drum dryer is designed to dry Food waste which contains high moisture.Heat is generate by hot air generator by Coal, gas, petrol,diesel, biomass fuel etc.Total system is automated & moisture in Food waste is adjustable as per requirement in various sectors.Depending on raw Food waste ,moisture and required production we can suggest suitable model and an approximate cost of your system in a short time frame. Working principle The hot air and the wet Food waste are first fed into the first-stage drying cylinder by the feeding system. At this time, the maximum temperature of the air flow is the highest, which can make the surface of the high-humidity and high-viscosity Food waste quickly dry and prevent the adhesion of the inner wall of the cylinder. , The Food waste into the second-stage drying cylinder, then the hot air temperature slightly lower than the first level of hot air, but with the Food waste to the opposite, so that the increase in hot air and Food waste contact area, increased feed distance, better drying effect Obviously, under the action of the leading Food waste system, the Food waste enters the third pole of the drying cylinder, which is the Food waste has been basically completed dry, hot air temperature and air volume are the smallest, can further meet the requirements of customers drying Food waste. Advantages Special technology can take more energy-saving and efficient for you,and the main structure is consists of three different metal steel cylinder with different diameter, it can get a bigger evaporation area, and drying faster,letting the Food waste make a full contact with the hot air;â??Auto-Feeding Control deviceâ?� can be regulated according to the moisture content of the Food waste ;â??Negative pressureâ?�working condition, clean work site and operating reliably. Our Services 1)Pre-sale services: Enthusiasm and sincere We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand. 2)Sale services:Careful service For your service to be exhaustive, so that you feel the seriousness of our team products and team customers intentions; 3)After-sale services: Faithfulness To establish long term friendship, we will regularly pay return visit to customers. Supplying technique, building design, instruction, installation and debugging for free. 4)After service We provide one-year warranty to make sure your machine runs consistently. We always offering lifelong services and provide spare parts for a long term. NOTE: In order to quota you the right machine with best price, we would like to get the following information include in your inquiry: -What is the raw material you are going to dry? -What is the start and ending moisture? -What is the capacity per hour you need? -What about the heat temperature? -What kind of fuel you use to heat the dryer? -How about dust collect requirements? -Other special requirements?
