Beston charcoal making machine can make charcoal from waste biomass, sludge and solid wastes. Charcoal now is popular in the global market.
Beston pyrolysis machine turns waste tire, waste rubber, oil sludge into pyrolysis oil. You can also get carbon black and steel wire. The whole process is environmentally friendly.
Tyre to oil machine refers to the pyrolysis machine that turns waste tyre into fuel oil, carbon black and combustible gas.
Maybe you will ask what is pyrolysis plant. It is a machine that is used to effectively dispose of plastic, waste tyre/rubber and waste sludge into useful and valuable products: fuel oil, carbon black and combustible gas.
Description: Pet food extruder is widely used for process all kinds of grains into high-grade aquatic feed pellet for fish,catfish,shrimps,crab.It also can make pet feed for dog,cat,chicken,crow, birds,poultry,pig,goat,etc with different shape and chicken feed.The final feed pellets have unique shape and good taste,high nutrition and smooth textu. Raw Materials: (1). Raw materials like flour,corn meal,soybean meal,maize meal ,meat meal,bone meal,fish meal,vitamin etc. (2). Raw materials Powder Size: 60-80 Mesh. (3). Raw materials moisture content: 20-25%. (4). Diameter of Final Pellets: 1mm-15mm (Optional). (5). Length of the pellets can be adjustable by control the cutting knife Advantages: 1.The fish feed pellets can float on water for over 20 hours.And sinking and floating aqua-feed pellets both can be made just by adjusting the feed formulation. 2.Pellet diameter is 0.9mm-15mm by changing the mold.The cutter can cutting the pellets into different length. 3.The feeding speed,cutting speed,temperature all can be adjusted. 4.Screw sleeve of this floating fish feed machine adopts 40Cr, which guarantees long service life. 5.High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest 6.The machine also can make pet food include dog,cat birds,chicken,pig,cattle etc with different shapes and we can customized the shapes for you. Parameter: Dry type extruder specification: Model Capacity Main power Feeding power Screw diameter Cutting power (kg/h) (kw) (kw) (mm) (kw) DGP-40 40-60kg/h 7.5kw 0.4kw 40mm 0.4kw DGP-50 60-80kg/h 11kw 0.4kw 50mm 0.4kw DGP-60 100-150kg/h 15kw 0.4kw 60mm 0.4kw DGP-70 180-250kg/h 18.5kw 0.4kw 70mm 0.4kw DGP-80 300-350kg/h 22kw 0.4kw 80mm 0.6kw DGP-100 400-450kg/h 37kw 1.1kw 90mm 0.6kw DGP-120 500-700kg/h 55kw 1.1kw 120mm 1.5kw DGP-135 800-1000kg/h 75kw 1.1kw 133mm 2.2kw DGP-160 1200-1500kg/h 90kw 1.5kw 155mm 2.2kw DGP-200 1800-2000kg/h 132kw 1.5kw 195mm 3.0kw
Description: Pet food extruder is widely used for process all kinds of grains into high-grade aquatic feed pellet for fish,catfish,shrimps,crab.It also can make pet feed for dog,cat,chicken,crow, birds,poultry,pig,goat,etc with different shape and chicken feed.The final feed pellets have unique shape and good taste,high nutrition and smooth textu. Raw Materials: (1). Raw materials like flour,corn meal,soybean meal,maize meal ,meat meal,bone meal,fish meal,vitamin etc. (2). Raw materials Powder Size: 60-80 Mesh. (3). Raw materials moisture content: 20-25%. (4). Diameter of Final Pellets: 1mm-15mm (Optional). (5). Length of the pellets can be adjustable by control the cutting knife Advantages: 1.The fish feed pellets can float on water for over 20 hours.And sinking and floating aqua-feed pellets both can be made just by adjusting the feed formulation. 2.Pellet diameter is 0.9mm-15mm by changing the mold.The cutter can cutting the pellets into different length. 3.The feeding speed,cutting speed,temperature all can be adjusted. 4.Screw sleeve of this floating fish feed machine adopts 40Cr, which guarantees long service life. 5.High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest 6.The machine also can make pet food include dog,cat birds,chicken,pig,cattle etc with different shapes and we can customized the shapes for you. Parameter: Dry type extruder specification: Model Capacity Main power Feeding power Screw diameter Cutting power (kg/h) (kw) (kw) (mm) (kw) DGP-40 40-60kg/h 7.5kw 0.4kw 40mm 0.4kw DGP-50 60-80kg/h 11kw 0.4kw 50mm 0.4kw DGP-60 100-150kg/h 15kw 0.4kw 60mm 0.4kw DGP-70 180-250kg/h 18.5kw 0.4kw 70mm 0.4kw DGP-80 300-350kg/h 22kw 0.4kw 80mm 0.6kw DGP-100 400-450kg/h 37kw 1.1kw 90mm 0.6kw DGP-120 500-700kg/h 55kw 1.1kw 120mm 1.5kw DGP-135 800-1000kg/h 75kw 1.1kw 133mm 2.2kw DGP-160 1200-1500kg/h 90kw 1.5kw 155mm 2.2kw DGP-200 1800-2000kg/h 132kw 1.5kw 195mm 3.0kw
Description: Pet food extruder is widely used for process all kinds of grains into high-grade aquatic feed pellet for fish,catfish,shrimps,crab.It also can make pet feed for dog,cat,chicken,crow, birds,poultry,pig,goat,etc with different shape and chicken feed.The final feed pellets have unique shape and good taste,high nutrition and smooth textu. Raw Materials: (1). Raw materials like flour,corn meal,soybean meal,maize meal ,meat meal,bone meal,fish meal,vitamin etc. (2). Raw materials Powder Size: 60-80 Mesh. (3). Raw materials moisture content: 20-25%. (4). Diameter of Final Pellets: 1mm-15mm (Optional). (5). Length of the pellets can be adjustable by control the cutting knife Advantages: 1.The fish feed pellets can float on water for over 20 hours.And sinking and floating aqua-feed pellets both can be made just by adjusting the feed formulation. 2.Pellet diameter is 0.9mm-15mm by changing the mold.The cutter can cutting the pellets into different length. 3.The feeding speed,cutting speed,temperature all can be adjusted. 4.Screw sleeve of this floating fish feed machine adopts 40Cr, which guarantees long service life. 5.High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest 6.The machine also can make pet food include dog,cat birds,chicken,pig,cattle etc with different shapes and we can customized the shapes for you. Parameter: Dry type extruder specification: Model Capacity Main power Feeding power Screw diameter Cutting power (kg/h) (kw) (kw) (mm) (kw) DGP-40 40-60kg/h 7.5kw 0.4kw 40mm 0.4kw DGP-50 60-80kg/h 11kw 0.4kw 50mm 0.4kw DGP-60 100-150kg/h 15kw 0.4kw 60mm 0.4kw DGP-70 180-250kg/h 18.5kw 0.4kw 70mm 0.4kw DGP-80 300-350kg/h 22kw 0.4kw 80mm 0.6kw DGP-100 400-450kg/h 37kw 1.1kw 90mm 0.6kw DGP-120 500-700kg/h 55kw 1.1kw 120mm 1.5kw DGP-135 800-1000kg/h 75kw 1.1kw 133mm 2.2kw DGP-160 1200-1500kg/h 90kw 1.5kw 155mm 2.2kw DGP-200 1800-2000kg/h 132kw 1.5kw 195mm 3.0kw
Product Name:Automatic pet food feeder Color:White Volume:35.8*32.2*18.5 cm MOQ:1 set Packing:Master case Payment:T/T, insurance, Paypal,ect.
Introduction The J23-80 puncher press machine is a general punch machine used for pressing sheet metal, which is commonly used in watch, toys, tableware, telecommunications, instrumentation, electrical machine, automobile making and so many other fields. When the press machine is equipped with the automatic feeding device, it can carry out semi-automatic pressing. The nominal force of the equipment occurs 5mm distance from the slider to bottom dead center. In the design of cold pressing process, the working rules are selected according to the pressure curve diagram. When selecting, the intersection between use pressure and corresponding crank angle must be within the scope of strength. Technical Parameter Item Units Nominal pressure KN 800 Nominal stroke mm 7 Slide stroke mm 130 Stroke number min-1 40 Mold set height mm 390 Mold height adjusting amount mm 80 Slide block central distance mm 310 Working table size Front and back mm 570 Left and right mm 860 Working table hole size Front and back mm 310 Left and right mm 450 Diameter mm 400 Sliding block underside size Front and back mm 360 Left and right mm 400 Die shank hole size Diameter mm 60 Depth mm 70 Stand column distance mm 400 Working table thickness mm 85 Inclination Angle 20 Boundary dimension Front and back mm 1990 Left and right mm 1500 Height mm 2960 Motor power KW 7.5 Weight Kg 5800
Description J21-100 punch presses are large machines with a c type frame, power press with fixed bed and slide block's reciprocating motion to finish the punching work. It is usually used for stamping and forming communications, computers, household appliances, furniture, vehicles(cars, motorcycles, bicycles metal parts), etc. Characteristics 1.It adopts steel welding structure with high stiffness and reasonable structure and low noise. 2.Combined type air friction clutch which is easy to install and repair. 3.The main motor have positive inversion function and with duplex magnetic valve to ensure the safety. 4.The crank connecting rod serves as the working mechanism. Crank connecting rod is rigid, so the movement of the slider is mandatory, times of strokes in per minute of slider and the movement curve of the slider are fixed. Technical parameter: Item Units Value Nominal pressure Kn 1000 Nominal stroke Mm 8 Slide stroke Mm 130 Stroke number Min-1 38 Mold set height Mm 400 Mold height adjusting amount Mm 80 Slide block central distance Mm 340 Working table size Front and back Mm 630 Left and right Mm 950 Working table hole size Front and back Mm 320 Left and right Mm 450 Diameter Mm 400 Sliding block underside size Front and back Mm 360 Left and right Mm 400 Die shank hole size Diameter Mm 60 Depth Mm 70 Stand column distance Mm 400 Working table thickness Mm 95 Boundary dimension Front and back Mm 2250 Left and right Mm 1600 Height Mm 2900 Motor power Kw 11 Weight Kg 7150
10L Rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries. Main Features of the10L Automatic Lifting Rotary Evaporator: 1, The main body of the use of stainless steel + aluminum alloy, reasonable structure, materials stress. 2, Sealing system using PTFE and imported fluorine rubber combination seal, to maintain high vacuum. 3, Vacuum pressure gauge shows real-time vacuum, vacuum up to 0.098Mpa. 4, Glass parts are all high borosilicate glass (GG-17), high temperature, anti-corrosion. 5, Can be continuously fed to facilitate the use of customers, valve-type feeding tube sets of tetrafluoroethylene tube. 6, Vertical three-tier serpentine coil condenser, the main cold + pay cold double condenser, to ensure high recovery rate, additional tube. 7, Microcomputer ON-OFF power switch control. 8, Bath digital display, intelligent thermostat control, K-type sensor fast and accurate delivery temperature. 9, Frequency control (0-120rpm), speed digital display, knob set, easy to operate. 10, Fuse safety protection. 11, The pot is made of high quality stainless steel, durable and durable. 12, Bath handwheel lift. 13, Collection of bottles with a discharge material, easy to evaporate the collection of extracts, discharge. 14, Check valve control, continuous discharge.
Three target magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable. This device can be used for preparing single-layer or multi-layer ferroelectric thin films, conductive films, alloy films, semiconductor films, ceramic films, dielectric films, optical films, oxide films, hard films, PTFE films, and the like. Compared with similar equipment, this three-target magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation, and is an ideal equipment for preparing material films in a laboratory.
Brief introduction of this N95 mask make machine: This machine is a semi-automatic KN95/N95 mask making machine. Including automatic feeding, cutting, built-in nose bridge, ultrasonic fusion, slicing and other automatic features.It has the characteristics of simple operation, stable operation and flexible production process. Main features of this N95 mask make machine 1.One person can operate several machines, reducing labor cost and saving time. 2.Manual feeding, automatic cutting, automatic welding and automatic blanking are safe and convenient. 3. Adopt double-position ultrasonic welding technology, which has high efficiency, high cost performance and high stability. 4.Automatic welding of butterfly mask lugs can quickly replace positioning fixture to adapt to the production of various types of butterfly masks. 5. N95 mask roll mould adopts international high-end material, precision manufacturing, high precision and stable operation. 6. The masks produced have great filtration effect, perfectly fit face of people and are comfortable to wear without causing any pressure .
Three targets DC magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable. There are 1-inch or 2-inch magnetron targets for you to choose. Customers can choose the target according to the size of the substrate to be coated. The device is equipped with 500W DC power supply. The DC power supply can be used for the preparation of metal film. The three targets can meet the needs of multi-layer or multiple coatings. If customers have other coating needs, DC power supply and pulse power supply can be customized. Various types of power supply are available from 300W to 1000W in various specifications. The coating machine is equipped with two-channel high-precision mass flowmeter. If you have other requirements, you can customize the gas path of up to four-channel mass flowmeters to meet the complex gas environment construction requirements. The instrument is equipped with advanced turbomolecular pump sets, the ultimate vacuum is up to 1.0E-5Pa, and other types of molecular pumps are available for purchase. Molecular pump gas path is controlled by multiple solenoid valves, you can open the chamber to take out the sample without shutting down the pump, greatly improving your work efficiency. This product can be equipped with an integrated industrial computer to control the system. In the computer program, most functions such as vacuum pump control and sputtering power control can be realized, which can further improve your experimental efficiency.
Main Advantages of Biochemistry Analyzer : 1.New concept and more friendly software. 2.New techniques and spare parts used for much better quality and function. 3.Automatic washing station for both sample and reagent probe. 4.Liquid level detection and collision protection for both sample and reagent probe 5.Reliable cooling system for reagent chamber. 6.Powerful reaction cuvette washing system. 7.ISE module and barcode scanner(option). 8.Lower waste and more environment friendly. 9.New concept test control system available(on request). Model YJ-250 Biochemistry Analyzer Assay Model Random Access with direct reading syatem Method End point,Kinetic,Fixed time,Immunoturbidimetry,1-2 reagent,Multistandard,reagent/serum blank,etc Assay Item 40 assay ISE mould (Na+ ,K+, Cl- /LI*) available on request Throughput 1Reagent 257 tests/hour 2Reagent 150 tests/hour With ISE +120 tests/hour Test Menu T.BILI r-GT/GGT CHO Ca APOB-1/B CHE D.BILI ALP/AKP TG CL APOB CREA TP UREA CK P CK-MB Mg ALB CREA LDH C ASO AFU Lactic Acid ALT/GPT UA a-HBDH CO2 FMN LP(a) AST/GOT GLU AMY LDL-C HDL-C CHE LA TBA ADA HA-CRP PA FE Cu Zn C3 C4 lgG IgM lgA and drug ,toxicity ,etc Sample Position 60
CY-AFA-L1000 compact automatic drying tape casting coater is mainly used for laboratory coating of liquid or colloidal film. The film applicator is made of stainless steel with a constant weight to improve the uniformity of film. The device adopts bottom heat-able vacuum chuck up to 120�°C, so that the film is quickly dried. It has a scraper stopper, which can adjust the length of the coated film arbitrarily, and the scraper automatically resets when it reaches the limit. The upper cover has the functions of dustproof and heat preservation, and at the same time makes the device more beautiful. Features: 1. This equipment adopts a continuously variable motor to precisely control the coating speed. 2. The cross-bar can be used to push the adjustable scraper. There is no special requirement for the size of the adjustable scraper. 3. The waste collection box placed on the left edge of the vacuum chuck bed collects spare slurry to ensure the equipment itself and the surrounding area are clean. 4. The bottom intelligent vacuum heating chuck plate and digital display temperature control drying system can adapt to the development of science and technology of film formation under high temperature.
This equipment is multi arc ion coating equipment. Multi arc ion plating uses gas discharge or partial dissociation of evaporated materials to deposit evaporated or reactive materials on the substrate at the same time of bombardment by gas ions or particles of evaporated materials. The equipment is equipped with two multi arc targets, which are arranged on both sides of the cavity. With the planetary sample table, the coating efficiency can be effectively improved and the film forming effect can be improved. Features: 1. The coating instrument also adopts the integrated design, the cavity and the electric control part are left and right separated, realizing the separation of water and electricity, and effectively ensuring the safety of users. 2. The combination of glow discharge, plasma technology and vacuum evaporation can not only improve the film quality, but also expand the application of the film. 3. It has the advantages of fast evaporation rate, strong adhesion, good diffraction and wide film material. It is very suitable for hard protective coating such as TiN. 4. At the same time, the color of the film can be changed by controlling the atmosphere, and the film is firmly combined with the substrate, so it can also be used to make decorative films of various colors.
The small plasma sputtering and evaporation two-in-one coating machine is equipped with DC sputtering target and thermal evaporation assembly, which can not only be used for metal film plating by plasma sputtering, but also obtain carbon or other metal elemental films by evaporation. The instrument components are highly integrated, which realize two kinds of coating functions in the same chamber. This coating machine adopts high purity quartz chamber as vacuum chamber, and the coating process is completely visible. The instrument is equipped with two stage rotary vane vacuum pump, which can quickly reach the vacuum degree of 1.0E-1pa, and can meet the vacuum environment required by most evaporation coating experiments and diode sputtering experiments. This instrument has small size which can save space and can be used on the test bench. One machine has multiple purposes, which is cost-effective and very suitable for major universities and research institutions to choose. Small two-in-one coating machine applications: Scanning electron microscope sample surface gold spraying, gold steaming carbon spraying and other operations, as well as the production of non-conductor material test electrode.
The magnetron sputtering/vacuum evaporation composite coating equipment combines magnetron sputtering technology and vacuum evaporation technology in one coating equipment. In this device, magnetron sputtering cathode glow discharge is used to sputter the target atoms and partially ionize and deposit them on the substrate to form a film, and at the same time, the metal plating material can be melted in a vacuum by resistance heating and vaporized and then deposited on the substrate to form a film. This increases the utility and flexibility of the device. The equipment is used for metallization of plastic surface such as mobile phone case and deposition of non-conductive film and electromagnetic shielding film. The magnetron sputtering/vacuum evaporation composite coating equipment is equipped with a plasma processing device, a high-efficiency magnetron sputtering cathode and a resistance evaporation device, etc. The deposition rate of this device is fast, the coating adhesion is good, the plating layer is fine and compact, the surface finish is high, the uniformity and consistency is good; the machine realizes full automatic control of coating process, large load, reliable work, high qualification rate, low production cost and green environmental protection. The device is widely used in computer casings, mobile phone cases, household appliances and other industries, and can be coated with metal film, alloy film, composite film layer, transparent (translucent) film, non-conductive film, electromagnetic shielding film and the like.
Double target magnetron sputtering coater is a small laboratory coater with two targets developed by our company. It can be used to prepare single or multi-layer ferroelectric film, conductive film, alloy film, semiconductor film, ceramic film, dielectric film, optical film, etc. Compared with ordinary plasma sputtering, magnetron sputtering has the advantages of high energy, high speed, high coating rate and low sample temperature rise, which is a typical high-speed low-temperature sputtering. The magnetron target is equipped with a water-cooled inter layer, the water cooler can effectively take away heat, avoid heat gathering on the target surface, and make the magnetron coating work stably for a long time. In addition, the device is also equipped with bias power supply, which can add bias electric field between the target and the sample platform, enhance the energy of ions, improve the film quality and adhesion of the film. The whole machine adopts touch screen control, one key coating procedure, simple operation, and is an ideal equipment for preparing thin film in the laboratory.
