Polyester linoleum base fabric is a kind of non-woven fabric, which can also be called: tire base fabric, linoleum base fabric, waterproof base fabric. Polyester linoleum base fabric is a non-woven fabric product which is processed by carding, acupuncture reinforcement and dipping and setting of 100% polyester staple fiber . The shape is cloth type. It is made of high-strength fiber and has the characteristics of high tensile strength, corrosion resistance, aging resistance, high temperature resistance, good thermal stability, good permeability and large elongation. It is the first choice for producing modified asphalt waterproofing membrane. It mainly used in construction building construction, roofing engineering, underground engineering, bridge deck engineering, waterproofing of water storage tank, moisture proof and anti-corrosion of building foundation.
One-component polyurethane waterproof coating is a kind of reactive curing film-forming polymer waterproof coating.It is made up of isocyanate and polyether as main raw materials, mixed with various additives such as solidifying agent and plasticizer, and is dehydrated and polymerized by high temperature. sherry@henanjax.com
The elastomeric SBS modified asphalt waterproof rolling material is made of styrene butadiene-styrene rubber modified asphalt as coating. It is made of glass fiber felt, polyester felt and glass fiber reinforced polyester felt as the tread material. Features: Strong impervious performance and good anti-aging ability Acid and alkali resistant, with a service life of 30 years Good endurance climate capability Can be used in low temperature environments with long life High tensile strength, high elongation, good dimensional stability
Construction machinery.
features 1) Roller crusher has the features of simple structure, and takes up smaller space, and the operation and maintenance of this machine is very convenient. 2) Roller crusher is equipped with safety protection device. 3) The operational cost is low, stable operation, high efficiency, saving energy, high crushing efficiency. 4) There is equipped dust-proof plant inside the machine and the sealing ability is excellent, so that there is little powder dust and lower working noises, so that the working environment is greatly improved. 5) The gap of the roll can be adjusted according to the requirement of the customers. Applications Roll crusher applies to crushing medium hardness materials such as coke, sinter, limestone,various metal ore and nonmetal ore.It is most suitable for medium and fine crushing in small and medium-sized nonmetal mines and chemical industry.The minimum size can reach 100 mesh.
Feed opening (mm):200*350 Max.Feeding size (mm):180 Adjusting range of discharge opening (mm):18-70 Processing capacity (t/h):3-10 Rotation speed of eccentric shaft (r/min):260 Motor power (kw):11 Total weight (t)1.5 Dimensions(l*w*h)(mm)1000*870*990
Performance characteristics: Bag Filter is widely applied for dust collection applications in mining industry, chemical industry, pharmaceutical industry, and the production of flour, glass, metallurgy, mine, cement, building materials, etc. The bag filter is made up of the top chest, middle chest, bottom chest, dust exhauster, and jet cleaning system. There is spray tube and air outlet at the top chest. The middle box consists of perforated plate, venturi tube, filter bag, keel, pulse valve and gas cleaning system. The bottom chest is comprised of ash bucket, air inlet, access door, ash exhauster (which is composed of rotary dust valve or spiral conveyer) It could be made of carbon steel or stainless steel upon request. Dust collector is generally used with a temperature less than 12C. Customized dust collector for usage at high temperatures (less 23C) is also available.
This rotary cooler equipment can quickly cool higher-temperature of granular compound fertilizer directly Approximately to normal atmospheric temperature, which is convenient for timely and quick packing and Prevents compound fertilizer from forming block during store. It can achieve adverse Flow cooling, which can reduce pollution and improve working environment. It has many characteristics such as reasonable structure, stable run, strong adaptability etc.. Features of cooler: 1.High cooling efficiency 2.Simple structure, low rate malfunction, convenient operation, low cost of maintenance, stable operation. 3.Wide usage, can be used for the drying of different materials in powder, granule, strip, lump, large elasticity Of operation. Output is allowed to have larger fluctuations in manufacturing, but not allowed to influence the Quality of the products. 4.Easy to install and remove Application range of cooler: 1. Chemical industry: ammonium sulfate, sodium sulphide, anfu powder, ammonium nitrate, Urea, oxalic acid, bichromate potassium, pvc, nitrophosphate fertilizer, fytic acid, Phosphate compound fertilizer. 2. Food industry: glucose, salt, sugar, vitamin malted milk, granular sugar. 3. Mining products: ceramic sand , coal, coal slime, manganese ore, limestone, pyrite, peat, etc. 4. Others: iron powder, flat soybean
Performance characteristics: Bag Filter is widely applied for dust collection applications in mining industry, chemical industry, pharmaceutical industry, and the production of flour, glass, metallurgy, mine, cement, building materials, etc. The bag filter is made up of the top chest, middle chest, bottom chest, dust exhauster, and jet cleaning system. There is spray tube and air outlet at the top chest. The middle box consists of perforated plate, venturi tube, filter bag, keel, pulse valve and gas cleaning system. The bottom chest is comprised of ash bucket, air inlet, access door, ash exhauster (which is composed of rotary dust valve or spiral conveyer) It could be made of carbon steel or stainless steel upon request. Dust collector is generally used with a temperature less than 120C. Customized dust collector for usage at high temperatures (less 230C) is also available.
NE Plate Chain Elevator takes advanced technology from home and abroad. This products is suitable for vertical transportation of powder, granular, and bulk materials, also for high hardness materials. The temperature of materials should not be higher than 200 degree celsius. Max. Elevation height 40m. Advantages: Wide range of elevating height. Strong capacity and small driving power. Feeding materials by automatic flowing and discharge through gravity induction. Long service life and good leak tightness. Stable and liable operation, easy maintenance. Low running cost. Bucket elevator The description of bucket elevator: Bucket elevators are designed to move flowing powders or bulk solids vertically. Bucket elevators use an endless belt or chain and have a series of buckets attached to it. Bulk material is spread into an inlet hopper. Buckets (or cups) dig into the material and convey it up and over the head sprocket/pulley, and then throw the material out a discharge throat. Bucket elevator can be divided into belt type and chain type, and the common characteristic is used for vertical transportation of powder, granulated and small lump materials. It has compact structure, small covering area, large hoisting height, good sealed performance. Tape bucket conveyor is lightweight, flexible, simple handling maintenance and low noise, which can be used to transport density 1.5 t/m3 granular or small conveying of bulk materials. Advantage of Bucket Elevator: The bucket conveyor has the advantages of big conveying capacity, high hoisting height, stable and reliable running and long service life. The machine is applicable for the crushed materials, and block materials, such as coal, cement, block, sand, clay and ore. The bucket elevator is allowed to convey materials with high temperature when armed with special circle chain tructure. Henan Zhengzhou Mining Machinery Co., Ltd. Specializes in manufacturing bucket elevator. Henan Zhengzhou Mining Machinery Co., Ltd. Designs and manufactures a wide variety of bucket elevators based on the characteristics of the bulk material and the process requirements. Designed to handle a wide variety of bulk materials from average to very free-flowing. Welcome to consult and order.
Gz series electromagnetic vibrating feeder Vibrating feeder is widely used in crushing, screening production line of mining, cement, metallurgy, building materials, chemical, mineral processing, coal mining and industries. The vibrating feeder is used to mine material from a storage silo or other material storage equipment in uniform or quantitative supply to the equipment of subject material, and is the necessary equipment to practice routine automation. Introduction of the vibrating feeder: Gz series electromagnetic vibrating feeder mainly used for mining, metallurgical, chemical, coal, machinery and other industries in to the accepting machine. Being diversification, this series of products can be specially designed and produced according to the customers' need. Furthermore, all types of electromagnetic vibration feeder can be easily implemented manual or automatic control. Henan zhengzhou mining machinery co., ltd. Is a large professional manufacturer of vibrating feeder. We can provide our customer with a good consultant and assistant, to ensure our customer's investment will be rewarded with great profit. At the same time, select the right model of equipment for customer. To meet our customer's special needs, we can design and develop customized products.
Introduction: PF Series Impact Crusher is one kind of equipment to crushing the brittle material which compression strength no more than 350 Map, the advantage including high crushing ratio, uniform product grain and low over crushing, low energy consumption, high adjustment range of product grain size and optional crushing etc, which is mainly used in mine, metallurgy, cement, construction material, coal etc for secondary crushing and fine crushing the medium hardness material. PF Series Impact Crusher is mainly used in secondary crushing, and can crush material o f crushing compression strength no more than 320 Maps. It is suitable to produce high rank highway, hydroelectric and building material and such industry as stone. (1)Even crushing function of multi-cavities which is suitable to crush hard material. (2)Reasonable design of leveling plate making the finished material finer and cubic-shaped without internal cracks. (3)Low and big feed opening make the production line easy to arrange and increase the size of feeding material. (4)Hydraulic start-up which is convenient for maintenance and replacement of wear-parts. (5)New anti-abrasive material which prolong service life of impact hammer, impact plate and liner. Advantages: 1 Large feeding port and high crushing cavity, suitable to crushing the material with high hardness and big grain size, and less powder. 2 The gap between impact plate and hammer plate is adjustable, so the discharging grain size can be effective control and the grain shape is well. 3 The hammer, impact plate and lining plate are made of new type abrasion-proof material with long working life and impact protection, wear protection. 4 Because of the function of three-stage crushing and plastic, so the crushing ratio is high, and the product shape is cube and can optional crushing. 5 The multi-function hydraulic station has many function of hydraulic discharge gap with high speed, impact plate stable vibration and the body open automatically.
Gas Burner is research and developing for rotary kiln that burning with single or various gas fuel, which not only ensure all the advantages and specificity of four-channel burner, but also enhance the application of burning. The burner have special structure and reasonable technical parameters, guarantee the gas fuel fully mixing with air, primary air and secondary air, which to ensure stronger heating intensity, higher burning efficiency, easier adjustment. Burner can be applicable for various metallurgy and chemical rotary kiln. Application Burning System for Rotary kiln on industry fields like Power, Chemical, Metallurgy, Building material etc. Its special advantages as follows: 1.Stability flame with regular flame shapes, no phenomenon like fluctuation and sweep kiln liner, that will outstanding extend the life time of kiln liner. 2.Good mixing performance with gas fuel, primary air and secondary air, burning abundantly, that can be enhance heating intensity and reduce primary air proportion at same time, then will improve kiln capacity and reduce energy consumption. 3.No strong eddy between flame and bowl effect produced by flame cover, can avoid appearance of temperature peak and make evenly distribution of flame temperature, then effectively protect cylinder and guard plate of kiln inlet. 4.Due to more fully mixing with combustion air and fuel gas, the burning will be more quickly and fully, which will reduce the content of CO and NOX from kiln inlet, but also better for safety operating and realizing green production. 5. The nozzle has made by special material with advantages like heat-resistance and easy to change. 6.Simple operation and adjustment. When operating, erupt speed of each air pipe can be change via adjust sectional area, then will realize goals like adjustment of flame shape and strength. Gas Burner is mainly composed with Pipe, Nozzle, Ignition device, Metal corrugated compensator, Butterfly valve, Pressure measurement and Protection layer etc. The mainly features are: 1. Pipeline From outside to inside respectively, the pipeline has consist of Axial wind channel, Swirling wind channel, Gas wind channel, central wind channel and ignition channel. And the ignition is just for igniting, so called four-channel burner. 2. Nozzle Nozzle made by special material, spray mouth sectional area of axial wind channel, swirling wind channel and gas wind channel are adjustable, so that can adjust the spray speed of each channel. The nozzle is the key part to ensure flame shape. 3.Ignition Device Located in the central wind channel, used for automatic igniting. 4.Metal Corrugated Compensator Which is the key part to connect each channel, sealing and adjust flame shape, and allowed process axial movement with connected channel.
Advantages of magnetic separator: 1)Newest CTB series magnetic separator In China 2)Simple structure, high yield; 3)Covenient operation; 4)Granularity blow 0.5m Application of magnetic separator: Newest STB Series magnetic separator In China. This series of products is used in wet magnetic separation of materials with granularity below 3mm like magnetite, pyrrhotine, bake ore and washingtonite. It is also used for deironing materials like non-metal ores, coal and building materials. Average magnetic induction of barrel surface is 100-600mT. According to customer's demands, it can provide magnetic separation with different magnetic induction like forward flow, semi counter flow and counter flow. The products have features, such as simple structure, high yield, convenient operation and easy maintenance. Characteristics of Magnetic separator: The products have geatures, such as simple structure, high yield, convenient operation and easy maintenance.
Powder feeder With the development of metal material surface modification technology, powder feeder application become more and more wide for 3d printing , laser cladding, plasma cladding, thermal spraying, vapor deposition, and welding wire welding for cladding alloy powder for strengthening in the industry. To meet the above needs , overcome the deficiency in the existing powder feeder, we have succeeded in developing the third generation accurate powder feeder. Feature Good continuity in feeding, high precision, simple structure, and long service life. Application Laser cladding equipment, plasma cladding equipment, 3d print, etc.
Application of quarrying lime vibrating feeder device  It can provide ores and rocks within 500mm for the next working procedure. It can send shaped and granule materials into receiving equipment evenly, timely and continuously. It is widely used as crushing and screening in the industry of metallurgy, building material, chemical industry, coal mining and abrasive material. Features of quarrying lime vibrating feeder device �.Steady vibrating, reliable working and long life. �.Adjustable vibrating. The rate of flow can be changed and controlled at any time, which makes the adjusting convenient and steady. �.Little noise and low energy consumption of quarrying lime vibrating feeder device . �.Simple structure, light weight and small size. �.Easy to maintain. �.Able to protect the feeder machine from pollution of dust when using the enclosed structure.
Pulse Jet Bag Filter incorporates the advantages of the several kinds of bag filters and is equipped with high performance pulse valve. This kind of bag filter can be used in building material, metallurgy, chemical and refractory industries, especially the crushing, packing, clinker cooling and grinding workshops in cement production. It is also suitable for dust collection of coal grinding after some modification. Application: Building material, metallurgy, chemical and refractory industries. Output: Volume(m³/h): 67300-314000 Filtration area(m2): 935-4361 Net filtration area(m2): 4205 Dust content at inlet(g/m³):
Magnesium metal production line We are the leading company of magnesium production lines both at home and abroad, in the year 2011, we have signed an annual output of 100000 tons of magnesium metal project with the world iron and steel giant Korean Pohang iron POSCO company. Magnesium Calcination Process The company's magnesium production line is very famous, at present, many famous enterprises at home and abroad have chosen to cooperate with our company. Step1: Calcined--The calcined dolomite granular A. Process introduction: As a result of mining dolomite is too large in volume, So crushing and calcining bulk dolomite, make its become particles. B. Main Product: Jaw Crusher, Conveyor, Vibrating screen, Vertical preheater, Rotary kiln, Vertical cooler, etc. Step2: Grinding and balling--Raw material production and storage A. Process introduction: Calcined dolomite, using a ball mill and other equipment to the grinding ball material, storage after production well. B. The main equipment: Electronic batching scale, Bucket elevator, Ball mill, Screw conveyer, FU chain conveyor, etc. Step3: Reduction treatment -Reduction treatment raw materials A. Process introduction: Refine the raw materials, product the qualified products and sales. B. List of equipment and processes: Reduction furnace, Wind machine Vacuum pump, Jet pump, etc. Step4: Refine--produce a product A. Process introduction: Use of a series of equipment, refine the raw material, create quality products and sales them. B. The main equipments: Refining furnace, Electronic moisture device, Pouring pump, Continuous casting machine, etc.
Ball Mill Equipment Features 1) Ball Mill Equipment is an efficient tool for grinding many materials into fine powder. 2) The Ball Mill Equipment is used to grind many kinds of mine and other materials, or to select the mine 3) Ball Mill Equipment is widely used in building material, and chemical industry. 4) There are two ways of grinding: The dry way and the wet way. 5) Ball Mill Equipment can be divided into tabular type and flowing type according to differentexpelling mine 6) To use the Ball Mill Equipment, the material to be ground is loaded into the neoprene barrel that contains grinding media. 7) As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours. 8) The longer the Ball Mill Equipment runs, the finer the powder will be. 9) Ultimate particle size depends entirely on how hard the material you're grinding is, and the time how long the ball mill runs. 10) Our Ball Mill Equipment have been used to grind glass, powder food products, create custom varnishes, make ceramic glaze, powder various chemicals.
Apron conveyor is a machine that works on the ground, it can transport material in horizontal and inclined direction. The plate chain work as a traction device, which is not only strong strength, high efficiency, reliable operation, also the conveying angle can reach 30° ~ 35° , its general bending radius is about 3 m ~ 5 m, it can also transport materials in high temperature (600 degrees Celsius~ 700degrees Celsius ). Feature: 1 Apron conveyor is a kind of slat conveyor, widely used in mine, metallurgy, cement etc. 2 It is the essential equipment in the processing of raw material or continuous production process. 3 It's suitable to convey the material that viscosity is small, big block, sharp, wear resistance and high temperature hot material. 4 They have sample structure, stable and reliable operation, long life and other advantages. Plate type chain and round link chain are the majors. 5 Our company can design and manufacture special models based on your needs. Apron conveyor: Slat conveyor that we manufactured and designed using latest technologies. Owing to high quality standards, these conveyors are effectively used in chemical industry, power plant and other areas. Designed using proper calculation, these slat conveyors are assured to be smooth and safe equipment at customer's premises. To meet the specific requirements of our clients, we offer these conveyors in various type, size and speed. 2, Technology parameters Apron conveyor is a machine that works on the ground, it can transport material in horizontal and inclined direction. The plate chain work as a traction device.
