Zhengzhou Brass Wire Scrap Suppliers and Manufacturers

Brass Coated Wire for Rubber Hose Item: Copper Plated Hose Reinforcement wire Diameter:0.56 mm Brass Coated Steel Hose Wire normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please)

Advantage of ASTM Brass coated steel wire hydraulic hose steel wire on sale -------- Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support Advantage of ASTM Brass coated steel wire hydraulic hose steel wire on sale -------- Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support

Electrical wire/textile cable/fabric cable cotton cable wire/brass. Cotton Cable Wire & Brass

brass coated steel wire for hose wire Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated Advantage of brass coated steel wire for hose wire

Reinforced brass coated steel wire for hose wire (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of brass wire for hose reinforcement ISO/TS 16949 And ISO9002 certificated One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003

brass coated steel wire for hose wire (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to

Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support Best Price Copper brass coated steel Wire copper wire for hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Best Price Copper brass coated steel Wire copper wire for hose Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated Hengxing company website: https://hengxingsteelwire.com/ http://en.hengxingchinese.com/ Email contact US:wmsale@hxkjgf.com

Advantage of brass coated steel wire for hose wire -------- Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support brass coated steel wire for hose wire (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsale@hxkjgf.com

Brass Coated Wire for Rubber Hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.

0.28mm Brass coated steel wire for hose reinforcement (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Advantage of 0.28mm Brass coated steel wire for hose reinforcement Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support INTRODUCTION:0.28mm Brass coated steel wire for hose reinforcement 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of brass wire for hose reinforcement ISO/TS 16949 And ISO9002 certificated One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003

Brass Coated Wire for Rubber Hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Brass Coated Wire for Rubber Hose Item: Copper Plated Hose Reinforcement wire Diameter:0.56 mm Brass Coated Steel Hose Wire normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated Advantage of Brass Coated Wire for Rubber Hose Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support

Hengxing Brand new products on china market ultra fine 0.17mm brass coated steel wire Advantage of Sawing Wire for Solar Wafer Cutiing Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology Hengxing Brand new products on china market ultra fine 0.17mm brass coated steel wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources. Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsale@hxkjgf.com

Brass coated Steel Wire Overview Brass plated rubber hose enhance wire also call brass plated steel wire is reinforced material for various kinds of high pressure conveying rubber hose skeleton, has excellent comprehensive performance.Mainly used in Hydraulic Hose,Rubber hose Reinforcement. Hengxing constantly develops new products as higher tensile strength wires,hose reinforcement wire and so on, to improve hose wire life,increase hose flexibility and increase adhesion performance. Characteristics of Brass coated Steel Wire 1.Copper coated steel cord, also known as steel wire for Hydraulic Hose 2.Tensile strength of 2450Mpa to 3350Mpa 3.Mainly used for rubber hose reinforcement. 4.Implementation standard: GB/T11182-2003 5.Export standard package, Inner: B60 or BP60 spools 6.Wire Gauge:0.2mm-0.5mm 7.It Can be produced and packaged according to the actual needs of customers.

Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources. http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsahttp://en.hengxingchinese.com/

China famous manufacturer brass coated steel wire hydraulic rubber hose steel wire (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.

top quality factory price 0.28mm High tensile brass plated steel wire for Industrial hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to

Brass Coated Steel Tyre Wire Radial Tyre Steel Cord Manufacturers Brass plated steel cord which is made from high carbon steel high-strength strands,is the inside reinforcement structure for radial tire. With strong coating,nice surface quality,average mechanical property,full stress relieving,the steel cord are widely used in radial tires for automabile and other tires. Hengxing can produce steel cord for many types of radial tire,including compact cord,high elongation cord,high impact cord and betru cord. Characteristic of brass plated tire steel cord Hengxing is a trusted partner of steel cord solutions. (1)Meets the highest performance, safety, environment and cost criteria. (2)Not easily be punctured, Extends tire life. (3)Strong wear resistance and long service life. (4)Strong safety, low noise and good absorption. (5)High strength and heavy load, Lower costs, lower weight and higher fuel savings.

0.25mm/0.28mm brass coated steel wire used in hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of brass wire for hose reinforcement ISO/TS 16949 And ISO9002 certificated One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003