Model number: sp450 Type: hydraulic breakers, top type Color: as per the specific requirement of clients Gross weight:100kg Total length:1119mm Drive oil prssure:90-120kg/cm^2 Drive oil:20-40litre/min Striking frequency:700-1200bmp Hose diameter:3/8 1/2inch Rod diameter:45cm Rod weight:8kg Applicable bucket capacity:0.03~0.01m^3 Applicable vehicle weight: 1.2-3.0ton Application: mining, demolition and construc
Introduction of WZ30-25 rockhammerloader WZ30-25 rockhammerloader adopt European technology, is featured by strong power, pilot control, comfortable operation, excellent performance and high cost performance. It is a new kind of multifunctional integrating mining loading of engineering machinery, the machine is based on the technology of similar products at home and abroad to develop a new generation of aircraft, the machine adopts four wheel drive, hydraulic torque converter power shift gearbox, hydraulic steering, hydraulic pilot control.this machine Is widely used in road maintenance farmland construction, brick kilns, earth-gathering, plumbing, cable laying, landscaping and concrete asphalt roadbed digging in broken, etc Parameter of WZ30-25 rockhammerloader Loading bucket capacity 1.2m3 Rated load capacity 2500kg Max. breakout force 49KN Max. Traction 38kn Tipping load 32KN Forward I gear shift 0-11km/h Forward II gear shift 0-27km/h Reverse I gear shift 0-10km/h Reverse II gear shift 0-26km/h Dumping height 3000mm Dumping reach when at max. dumping height 880mm Capacity of excavator bucket 0.4m3 Max. excavating depth 4100mm Max. excavating radius 5000mm Revolute angle of movable arm 180° Engine 4105 /80KW Rated speed 2400r/min Max. steering angle 35° Grade ability 45% Min. turning radius (front wheel center) 4190mm Operation weight 6800kg Size(L*W*H) 7250mm*2100mm*2950mm Drive type 4WD Contact:
SDCK800 Plastering thickness2-28mm Plastering width90cm Plastering height 4.5m Power supply1.5KW Capacity400 m2 to 550m2/8h Power220V/380V Surface Very Smooth Level degree 2mm Perpendicularity degree 2mm Juncture device,Smoothing knifeYes
ZM800-A Electric Automatic Cement Plastering Machine is a new machine instead of handmade in construction plastering area. Model ZM800-A Plastering Height 0-5meters Plastering Thickness 2-25mm Plastering Width 80cm Capacity 450 square meters/8 hours Dimensions 1350Ã?800Ã?500mm Voltage/frequency According to your demands Weight 240kg Surface smooth Vibrator 2 vibrators Juncture device Yes Smoothing knife Yes Perpendicularity degree 2mm Level degree 2mm
Plastering height 0-3.6m Plastering thickness 2-30mm Plastering width 80cm Power supply 2.2KW Capacity 500-750m2/8hours Electricity Phase Single / Three Power 220V/380V50HZ/60HZ Dimensions 800*650*500mm Surface Very Smooth Level degree 2mm Perpendicularity degree 2mm Juncture device,Smoothing knife Yes
ZB800-5A Portable Auto Wall Rendering Machine is the extended version of all our plastering machines. It gathered all the advantages: mini size, flexible operation, simple structure and light weight. Especially suitable for small rooms. lastering height 0-3.6m Plastering thickness 2-30mm Plastering width 80cm Power supply 2.2KW Capacity 800-850m2/8hours Electricity Phase Single / Three Power 220V/380V50HZ/60HZ Dimensions 720*830*680mm Surface Very Smooth Level degree 2mm Perpendicularity degree 2mm Juncture device,Smoothing knife: Yes
Model LYD-CY-3 Efficiency 500 m /8h thickness 2mm 30mm Size 1300850540mm Height Below 5m Voltage 220V / 380V Weight 180kg Wattle main motor:2.2kw1Vice motor 3.02
Construction machinery.
Construction equipments and boards.
Pile hammer, quick hitch coupler, hydraulic pulverizers, hydraulic shears, vehicle scraping shears, log/rock grapple, sorting grapple, orange peel grapple, crusher bucket, tree mover, hydraulic compactor, ripper.Manufacturer & exporter
Pump parts, valve parts, machinery parts, machined parts, construction machinery parts.
Chemical machinery, construction machinery, mining machinery, transport equipment.Trade
Api 3/4¡± class sm slim hole sucker rod coupling 1) material: aisi 5140 2) standard: api spec 11b 3) main specification: Od:1-1/2" (38.1mm) Id: 1-1/16"(26.99mm) Length: 4" (101.6mm) Weight: 0.47kg 4)other size: 3/4¡±; 7/8¡±;1¡±; 1-1/8¡± 5)smoothness: 3.1*10-3 6)coat thickness(in): 0.01in ~ 0.02in 7)basic hardness: hrc 16-23 8)surface hardness: hrc 55-62 9)bonding strength(mpa): 484 10)hole rate: 180 days 15) package: wooden case, 1000pcs each case. 16) usage: oil exploration equipment, accessories, oil sucker rod coupling We are the manufacturer of sucker rod couplings and can supply the high quality sucker rod couplings in low price with the hope to establish a long-term relationship with you. If any of the sucker rod couplings interests you, please contact me for more information about the sucker rod couplings. Wooden cases
Hydraulic hammers, quick coupler, hydraulic compactor, post driver, earth auger, hydraulic shear, hydraulic pulverizer, hydraulic crusher, stone grapple, log grapple, excavator bucket and other attachments for construction machinery..Manufacturer
Cnc Machine For Stone Processing, Cnc Hole Punching Machine, Cnc Bridge Cutting Machine, Cnc Strip Cutting Machine And Other Series Of Stone Processing Equipments.
Construction machinery,such as concrete mixing/batching plant, concrete mixer, concrete pump, batcher, cement silo, truck mixer, tower crane, stabilized soil mixing plant, sc series construction hoist, pile drilling machinery,etc.
Features 1. This Electromagnetic iron remover adopts successive excitation with low energy consumption and stable performance 2. The separating area is provided with multiple magnetic systems. Equipped with counter magnetic System. 3. The continuous separation is monitored real time. Iron leakage is thus prevented. 4. This magnetic separator is designed with high mounting applicability and small floor space. 5. It has little auxiliary equipment and is easy to maintain.
Technical parameters Unit SC100 Frequency Construction hoists Height m 300 Rated load kg 1000 Maximum capacity 9 Boom lift wweight kg 200 Lifting speed m/min 0-50 0-60 Electormotor Model YZEJ132M(L)-4 Power kw 152 112 Speed-limiter Model SAJ40-1.2A SAJ40-1.4 Rated tripping speed m/s 1.2/1.4 Rated automaticload KN 40 Type gradual Reducer Model SWC1 TU68T TU66T Center distance mm 125 Speed radio 1:12 1:10 Bracking distance m 0.3-1.2 Mast section dimension mm 650 300 1508 Crane cage inner net dimension m 1.8*1.75*2.06 Hoistway dimensions m 2.09*2.5 Free end height of the guide rail frame m 4.5 Direct attached frame Installing interval m/set 4.5 Distance between two embedded parts mm 890-900 Installation dimensions from center of rail frame to building wall mm 300-500
