Key Feature:
1.High fine concrete conveying output thanks to S-transfer tube
2.Rigid valve box,wear-resistant plate and cutting ring assure long service life
3.Advanced electrohydraulic switching system,less pulsing and high reliability
4.Low maintenance and less prone to wear and tear
Key Feature:
1.The mixing system adopts the self-falling double-cone reversing discharging, high production efficiency and good mixing performance.
2.Robust and low-maintenance ring-gear drive of the mixing drum.
3.High conveying output thanks to S-transfer tube
4.Convenient reverse pumping function for removing blockage.
Max flow rate:20m�³/h;
Max output pressure:8MPa;
Motor power:30KW
Suitable concrete specification:slump:8-23better, aggregate size:16-20cm,
Dimension:3850*1610*1810mm
Weight:2740kg
Item Unit SJBS20-08-37
Mixing system Charging L 560
Output L 350
Pump system Maximum flow rate m³/h 20
Max.output pressure MPa 8
Mode of distribution "S"Valve
Pipe diameter mm 80
Pipe cleaning Compressed air or water washing
Power kw 37
Delivery cylinder*stoke mm 140*800
Dimension(L*W*H) mm 4610*2200*3010
Weight kg 3200
Key features:
The mixing system adopts the self-failing double-cone reversing discharging,high production efficiency and good mixing performance.
Robust and low-maintenance ring-gear drive of the mixing drum.
High conveying output thanks to S-transfer tube.
Advanced electrohydraulic switching system, less pulsing and high reliability.
Convenient reverse pumping function for removing blockage.
1.Reasonable structure, convenient repair: pump head part is used for before and after the door structure, repair without dismantling piping, just move the motor backwards, can be disassembled and repair the pump.
2.High concentration, no clogging: conveying pulp concentration up to 6%;
3. Cavitation erosion resistance, long service life: the actual service life than ordinary paper pulp pump can be increased by 2-3 times;
4. High efficiency, energy saving: efficiency than ordinary pulp pump average of 3-10 percentage points, saving energy and reducing consumption, up to 15-30% .
5. The impeller and the guard board clearance can be adjusted in a timely manner, maintain higher working efficiency. The pump above the pump body is larger, the structure of open, disassembly and convenient maintenance.
6. Application of water rinse to prevent clogging the pump is stopped.
7. The type of pump in addition to 12PN mud export level, others are vertical upward.
8. PN type pump shaft seal water must be added a certain amount of water, the general work flow of 1-3%, the pressure should be greater than the working pressure of 1 kg / cm 2.
9. 1PN, 2PN, 3PN, 2PNL, 3PNL steering motor direction is clockwise, 4PN, 6PN, 8PN, 10PN, 12PN steering motor direction is counter clockwise.
10. In this type of pump in general use.
11. The PN Horizontal Centrifugal Submersible Slurry Water Mud Pump is not allowed to reverse parking.
Key Features:
1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution.
2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure.
3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift.
4.Special design to achieve a high suction efficiency.
5.Low maintenance and less prone to wear and tear.
6.Efficient lubrication system to ensure long-time continuous operation.
7.Convenient one-button switching between high-and low-pressure operations
8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise.
Max flow rate:74m/h;
Max output pressure:13MPa;
Motor power:90KW
Suitable concrete specification:slump:8-23better, aggregate size:16-20cm,
Dimension:6440*2060*2150mm
Weight:6300kg
Key Features:
1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution.
2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure.
3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift.
4.Special design to achieve a high suction efficiency.
5.Low maintenance and less prone to wear and tear.
6.Efficient lubrication system to ensure long-time continuous operation.
7.Convenient one-button switching between high-and low-pressure operations
8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise.
Max flow rate:40m�³/h;
Max output pressure:8MPa;
Motor power:82KW
Suitable concrete specification:slump:8-23better, aggregate size:16-20cm,
Dimension:6440*2060*2500mm
Weight:5000kg
Key Features:
1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution.
2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure.
3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift.
4.Special design to achieve a high suction efficiency.
5.Low maintenance and less prone to wear and tear.
6.Efficient lubrication system to ensure long-time continuous operation.
7.Convenient one-button switching between high-and low-pressure operations
8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise.
Max flow rate:80m/h;
Max output pressure:16MPa;
Motor power:195KW
Suitable concrete specification:slump:8-23better, aggregate size:16-20cm,
Dimension:6770*2060*2500mm
Weight:7200kg
Key Features:
1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution.
2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure.
3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift.
4.Special design to achieve a high suction efficiency.
5.Low maintenance and less prone to wear and tear.
6.Efficient lubrication system to ensure long-time continuous operation.
7.Convenient one-button switching between high-and low-pressure operations
8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise.
Max flow rate:80/h;
Max output pressure:13MPa;
Motor power:118KW
Suitable concrete specification:slump:8-23better, aggregate size:16-20cm,
Dimension:6770*2060*2500mm
Weight:7100kg
Key Features:
1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution.
2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure.
3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift.
4.Special design to achieve a high suction efficiency.
5.Low maintenance and less prone to wear and tear.
6.Efficient lubrication system to ensure long-time continuous operation.
7.Convenient one-button switching between high-and low-pressure operations
8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise.
Max flow rate:80m/h;
Max output pressure:16MPa;
Motor power:132KW
Suitable concrete specification:slump:8-23better, aggregate size:16-20cm,
Dimension:6440*2060*2150mm
Weight:6500kg
Key Features:
1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution.
2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure.
3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift.
4.Special design to achieve a high suction efficiency.
5.Low maintenance and less prone to wear and tear.
6.Efficient lubrication system to ensure long-time continuous operation.
7.Convenient one-button switching between high-and low-pressure operations
8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise.
Max flow rate:80m/h;
Max output pressure:13MPa;
Motor power:110KW
Suitable concrete specification:slump:8-23better, aggregate size:16-20cm,
Dimension:6440*2060*2150mm
Weight:6400kg
Key Features:
1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution.
2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure.
3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift.
4.Special design to achieve a high suction efficiency.
5.Low maintenance and less prone to wear and tear.
6.Efficient lubrication system to ensure long-time continuous operation.
7.Convenient one-button switching between high-and low-pressure operations
8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise.
Max flow rate:74m/h;
Max output pressure:13MPa;
Motor power:90KW
Suitable concrete specification:slump:8-23better, aggregate size:16-20cm,
Dimension:6440*2060*2150mm
Weight:6300kg
Key Features:
1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution.
2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure.
3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift.
4.Special design to achieve a high suction efficiency.
5.Low maintenance and less prone to wear and tear.
6.Efficient lubrication system to ensure long-time continuous operation.
7.Convenient one-button switching between high-and low-pressure operations
8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise.
Max flow rate:40m�³/h;
Max output pressure:8MPa;
Motor power:75KW
Suitable concrete specification:slump:8-23better, aggregate size:16-20cm,
Dimension:4860*1830*2000mm
Weight:4500kg
The JZC350 concrete mixer is a self-falling double cone reversing discharge mixer, which has the advantages of high production efficiency, good mixing quality, light weight, and convenient movement.
Model JZC350
Charging volume (L) 560
Discharging capacity (L) 350
Productivity(m3/h) 10
Rev of drum(r/min) 14
Max size of aggregate(mm) 60
Water-supply error 2%
Discharge height(mm) 1250
Mixing electromotor Y132S-4, 5.5kw
Water pump electromotor 40DWB-12-0.55kw
Tire size 6.00-16
Maximum towing speed (km/h) 20
Outline dimension L B H (mm) 2810*2140*3070
Main feature:
1 Double cone reversal discharging, mixing drum forward stirring, reverse discharging,good in mixing homogeneity.
2 Loading, discharge, and mixing are completed by a set of driving mechanism, saving operating costs.
3 With a wheeled towing device, no need to disassemble and assemble during changing site, quick and easy relocation.
625 Agriculture Pumps Suppliers
Short on time? Let Agriculture Pumps sellers contact you.
