1.The product has the property of antibacterial, anti-aging and protection from UVR (ultraviolet radiation), and greatly improve adhesive power of products.
2.the product is nonpoisonous and harmless, and has a good compatibility with other materials.
3.The product has uniform particle size, big surface area, good dispersion and transparency,and has good property of anti-UV.
4.As a new material,titanium dioxide can be widely used on,electronic,battery, etc.
PA66 GF33 material can be used for Electric cooker, soybean milk and juice maker and other home appliances, air conditions shell, car accessories, fan heater, instrument panel, thermal jug...
New Energy vehicle charging pile and charging gun, automotive, MCB, appliance parts, low temperature resistant nylon tie band, power tools, office chair base, hydrant handle, ski equipment components, breaker, connector...
Battery cell jar case, heating appliances case, panel, plug, electronic shell, instrument frame, auto parts and etc...
Yb-mp1000
Anode current:300ma-380ma
Output voltage3800v-4200v
Output power :1328w
Advantage:
(1)easy to install.
(2)high efficiency(>90%), unpollute for power grid;
(3)allow the magnetron to achieve the best working point;
(4) wide input voltage range, 185-265v / 50-60hz ac input stability;
(5)forced air cooling by built-in 2 dc fan, operating tempreture :-30~65
(6)protections: short circuit / overload / over voltage/under voltage , moisture / corrosion / rust.
Yb-mp2000
Anode current:3800-4200v
Output power :3800v-4200v
Output power :3200w
Features
(1)cost performance , high efficiency, small ripple, unpollute for power grid.
(2) conversion efficiency, compared to other power sources more energy-efficient.
(3)allow the magnetron to achieve the best working point.
(4) power adjustable, voltage signal control.
(5) has a soft switching function, support multiple power and machine use.
(6) can drive a variety of long-term work magnetron.
(7) undervoltage, overvoltage, over-temperature protection.
(7) wide input voltage range, 185-265v / 50-60hz ac input stability.
(8)forced air cooling by built-in 2 dc fan, operating tempreture :-30-65
(9)protections: short circuit / overload / over voltage/under voltage , moisture / corrosion / rust
(10)small size, light weight, easy to install.
Product overview
Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection.
Technical parameters
Category Performance, parameters
Host Principle Ultrasonic time difference principle
Accuracy ±1%
Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French.
Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms)
Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC.
Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined.
Pipe inner diameter 15~6000mm
Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter)
Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves.
Temperature -30�ºC~160�ºC
Turbidity 10000ppm and small bubble content
Flow rate 0~�±10m/s
Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C
Humidity Host:85%RH Sensor protection level IP67
Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time.
Different measurement can be achieved by using the AC90~260V power adapter.
Power consumption 1W
Shell material Flame retardant ABS
Host weight 390g
274 Power Cord Suppliers
Short on time? Let Power Cord sellers contact you.
Product overview
Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection.
Technical parameters
Category Performance, parameters
Host Principle Ultrasonic time difference principle
Accuracy ±1%
Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French.
Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms)
Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC.
Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined.
Pipe inner diameter 15~6000mm
Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter)
Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves.
Temperature -30C~160C
Turbidity 10000ppm and small bubble content
Flow rate 0~±10m/s
Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C
Humidity Host:85%RH Sensor protection level IP67
Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time.
Different measurement can be achieved by using the AC90~260V power adapter.
Power consumption 1W
Shell material Flame retardant ABS
Host weight 390g
Han industrial group limited is an integrated high-tech enterprise with solar and led technology. Xi¡¯ an greenwood new energy technology co., ltd. Is the subsidiary of han industrial group limited.
We are specialized in the research, development and manufacture of led lights, solar lights and solar generating systems and so on. Our products are widely applied to lighting, sea navigation, solar road stud , solar warning light , coal mine, gas station and other professional industrial fields.
Specifications
1.Shell materials: high-pressure casting aluminum
2.Solar cell :mono/poly-crystalline silicon
Wp--250 mw vp--2.5 v 100ma
3.Battery : ni-mh (800mah)
4.Led : red, blue, yellow, green, white
5.Dimension: 108( l )¡Á97(w)¡Á25( h) mm
6.Waterproof:ip68
7.Weight: 300 g
8.Packing :60pcs/box 33*25.5*31cm
Han industrial group limited is an integrated high-tech enterprise with solar and led technology. Xi¡¯ an greenwood new energy technology co., ltd. Is the subsidiary of han industrial group limited.
We are specialized in the research, development and manufacture of led lights, solar lights and solar generating systems and so on. Our products are widely applied to lighting, sea navigation, solar road stud , solar warning light , coal mine, gas station and other professional industrial fields.
Specifications
1.Shell materials: polypropylene with calciumcarbonate
2.Solar cell :mono/poly-crystalline silicon
Wp--120 mw vp--2.5 v 48ma
3.Battery : ni-mh (600mah)
4.Led : red, blue, yellow, green, white
5.Dimension: 110( l )¡Á110(w)¡Á18( h) mm
6.Waterproof:ip68
7.Weight: 300 g
8.Packing :60pcs/box 33*25.5*31cm
Product features
1.Suitable for edge line of road and pavement
2.After 8 hours' normal sunlight, sparking or shining in the fog or rainy days for 120hs
3.Can work more than 3 years normally
4.Energy saving and environmental friendly
5.Fix firmly the product by epoxy resin glue or screws
6.It can load-bearing more than 30 tons
Bedded in the road surface, they are an electronic improvement on the traditional cat's eyes in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices. The intense brightness of the leds makes them easily visible at distances of about 900m under favourable conditions.
Place of origin:haanxi, china (mainland)
Brand name:han
Model number:han04
Waterproof grade:ip68
Service life time:5years
Resist compression:30 tons
Luminous mode:flashing or constant
Light duration:flashing type 108hours or constant type 24 hours after fully charged
Color of led:white/red/green/blue/yellow/color changing
Light source:4 or 6 pcs
Battery:ni-mh
Size:104*104*20 mm
Han industrial group limited is an integrated high-tech enterprise with solar and led technology. Xi¡¯ an greenwood new energy technology co., ltd. Is the subsidiary of han industrial group limited.
We are specialized in the research, development and manufacture of led lights, solar lights and solar generating systems and so on. Our products are widely applied to lighting, sea navigation, solar road stud , solar warning light , coal mine, gas station and other professional industrial fields.
As the only manufacturer for the BP solar in China, our factory has 12 production lines and we can offer 300MW per year. And we will be much honor to become your stable supplier.
We offer a wide range of modules of high quality at unbeatable price, and the products can meet the requirement of IEC61215,IEC61730 and have acquired UL,TUV,VDE,ETL,FM,KEMCO,BBA,CE and GD Golden Sun certification.
Besides, We also provide related services on research, consultancy, software development, design, supply, project management, installation, maintenance and commissioning which applied to off-grid and on-grid PV projects (including BIPV system).
High-efficiency photovoltaic module using silicon nitride Mono crystalline silicon cells
Performance BP 485 BP 480 BP 475
Rated power (Pmax) 85W 80W 75W
Module tolerance 3%
Nominal voltage 12V
Warranty 25years
Qualification test parameters
Temperature cycling range: -40¡ãC to +85¡ãC (-40¡ãF to 185¡ãF)
Damp heat test: 85¡ãC, 85% relative humidity
Front and rear static load test (e.g.: wind): 2,400 Pa (50psf)
Front load test (e.g.: snow): 5,400 Pa (113psf)
Hailstone impact test: 25mm ? (1 inch) at 23m/s (52mph)
Typical electrical characteristics BP485 BP480 BP475
Rated power (Pmax) 85W 80W 75W
Voltage at Pmax (Vmp) 17.8V 17.2V 17.4V
Current at Pmax (Imp) 4.78A 4.7A 4.3A
Short circuit current (Isc) 5.1A 5.1A 4.7A
Open circuit voltage (Voc) 22.2V 22.0V 21.8V
Temperature coefficient of Isc: (0.0650.015)%/ ¡ãC
Temperature coefficient of Voc: - (8010) mV/¡ãC
Temperature coefficient of Pmax: - (0.50.05)%/ ¡ãC
NOCT: 472¡ãC (Air 20¡ãC; Sun 0.8kW/m2; wind 1m/s)
Maximum series fuse rating: 15A (S); 20A (J)
Maximum system voltage: 600V (US NEC rating);1000V (T¨¹V Rheinland rating);1000V (IEC 61215 rating).
Performance TBEA4300
Rated power (Pmax) 300W
Module tolerance ¡À3%
Nominal voltage 24V
Warranty 25years
Qualification test parameters
Temperature cycling range: -40¡ãC to +85¡ãC (-40¡ãF to 185¡ãF)
Damp heat test: 85¡ãC, 85% relative humidity
Front and rear static load test (e.g.: wind): 2,400 Pa (50psf)
Front load test (e.g.: snow): 5,400 Pa (113psf)
Hailstone impact test: 25mm ? (1 inch) at 23m/s (52mph)
Typical electrical characteristics TBEA4300
Rated power (Pmax) 300W
Voltage at Pmax (Vmp) 36.4V
Current at Pmax (Imp) 8.3A
Short circuit current (Isc) 8.7A
Open circuit voltage (Voc) 44.8V
Temperature coefficient of Isc: (0.065¡À0.015)%/ ¡ãC
Temperature coefficient of Voc: - (0.36¡À0.05) %/¡ãC
Temperature coefficient of Pmax: - (0.5¡À0.05)%/ ¡ãC
NOCT: 47¡À2¡ãC (Air 20¡ãC; Sun 0.8kW/m2; wind 1m/s)
Maximum series fuse rating: 15A
Maximum system voltage: 600V (US UL rating);1000V (T¨¹V SUD rating);1000V (IEC 61215 rating).
As the only manufacturer for the BP solar in China, our factory has 12 production lines and we can offer 300MW per year. And we will be much honor to become your stable supplier.
We offer a wide range of modules of high quality at unbeatable price, and the products can meet the requirement of IEC61215,IEC61730 and have acquired UL,TUV,VDE,ETL,FM,KEMCO,BBA,CE and GD Golden Sun certification.
Besides, We also provide related services on research, consultancy, software development, design, supply, project management, installation, maintenance and commissioning which applied to off-grid and on-grid PV projects (including BIPV system).
Performance BP 3175 BP 3170 BP 3165
Rated power (Pmax) 175W 170W 165W
Module tolerance +5/-3%
Nominal voltage 24V
Limited Warranty 25years
Qualification test parameters
Temperature cycling range :-40¡ãC to +85¡ãC (-40¡ãF to 185¡ãF)
Damp heat test :85¡ãC, 85% relative humidity
Front and rear static load test (e.g.: wind):2,400 Pa (50psf)
Front load test (e.g.: snow): 5,400 Pa (113psf)
Hailstone impact test: 25mm ? (1 inch) at 23m/s (52mph)
Typical electrical characteristics BP3155 BP3160 BP3165 BP3170 BP3175
Rated power (Pmax) 155W 160W 165W 170W 175W
Voltage at Pmax (Vmp) 34.9V 35.1V 35.2V 35.9V 36V
Current at Pmax (Imp) 4.5A 4.6A 4.7A 4.8A 4.9A
Short circuit current (Isc) 4.8A 4.8A 5.1A 5.2A 5.3A
Open circuit voltage (Voc) 43.9V 44.2V 44.2V 44.2V 44.2V
Temperature coefficient of Isc :(0.065¡À0.015)%/ ¡ãC
Temperature coefficient of Voc :- (160¡À20) mV/¡ãC
Temperature coefficient of Pmax :- (0.5¡À0.05)%/ ¡ãC
NOCT : 47¡À2¡ãC (Air 20¡ãC; Sun 0.8kW/m2; wind 1m/s)
Maximum series fuse rating: 15A (S); 20A (J)
Maximum system voltage:600V (US NEC rating);1000V (T¨¹V Rheinland rating);1000V (IEC 61215 rating)ng).
Code ú¦qcb07/bl
Protection class ú¦ip54
Continuing on cloudy days ú¦7í½15 days
Controller model ú¦qkc3/a
Electric safety standard ú¦class ó±
Standard ú¦ gb7000.1-2002 gb7000.10-1999 iec598
The work power of solar energy battery ú¦3wí½5w
Led working volltage dc 12v age20years materilas&features:
The lamp body is preciely made of aluminum, with smooth and clean surface, without sand hole and crack.
The lamp shade is made of pmma with fine transmittance, high temperature resistant, highstrength, freezingresistant, uvproof, aging resistant, it can be cleaned with rain.
íñthe surface of the lamp is coated with outdoor power paint, smooth, acid and alkali res istant, aging resistant.
íñall the fastening parts are made of stainless steel.
1. Type: tk-005
Maximum power : 5watts
Voltage at pmax : 17.68volts
Current ar pmax : 0.29amps
Short circuit current : 0.31 amps
Open circuit voltage : 21.85volts
6GHz intelligent radar level gauge is suitable for non-contact continuous measurement of liquid, slurry, granular and bulk materials. It is suitable for temperature, pressure change, inert gas and volatilization.
The measurement method of microwave pulse is adopted, and it can work normally in the range of industrial frequency band. Low beam energy, can be installed in a variety of metal, non-metal containers or pipes, no harm to the human body and the environment.
Application:Simple corrosive liquid in the process
Skyline:PTFE
Measuring range: 20 meters
Frequency range: 6.8GHz
Accuracy: 0.1%FS
Medium temperature: -40 to +130 °C
Process pressure: -0.10.3Mpa
Power supply: 24vDC (two-wire, four-wire optional)
Signal output: 4...20mA/HART (two lines/four lines)/ RS485/Mod bus
Process connection:Thread
Protection level: IP67
Explosion-proof grade: Exia IIC T6 Ga
Product overview
Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a -type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, low starting flow, high measurement accuracy, and no pressure loss.
The main unit can be installed in the wall, instrument box, and distribution box with a protection level of IP67. The external clip sensor is installed on the surface of the pipe and selects different sensors. The applicable diameter is DN15~DN6000mm.
Product features
1. Simple installation, no need for professional workers
2. High precision and low price
3. Can work in humid and water-immersed environment
274 Power Cord Suppliers
Short on time? Let Power Cord sellers contact you.
