QJ-400 wire recycling machine
This machine with PCL control system,can recycling 99%copper from scrap copper wires/cables,the wire or cables' diameter should be below 20mm.
No packing
Mea.: L2700xW1900xH2300
Voltage:380V
Power: 16KW
Weight:1.2t output:150~200kg/h.
918-600 integral type separator
This machine is specializing for the auto wires, communication wires and so on, and for the wiref+s not fit for stripper. All parts are design as integrity, it's convenience for ur using.
Size: w3500xw1900xh270
Voltage:380v
Weight:3t
Power:36kw
Daily capacity:3-4t.
Passenger Cars, Special Vehicle On Board Power Systems, Wind And Solar Energy Storage Systems, Energy Management Systems, And Battery Man Agement Systems; Uninterruptible Power Supplies, Agv Bat Tery Packs.
6GHz intelligent radar level gauge is suitable for non-contact continuous measurement of liquid, slurry, granular and bulk materials. It is suitable for temperature, pressure change, inert gas and volatilization.
The measurement method of microwave pulse is adopted, and it can work normally in the range of industrial frequency band. Low beam energy, can be installed in a variety of metal, non-metal containers or pipes, no harm to the human body and the environment.
Application:Simple corrosive liquid in the process
Skyline:PTFE
Measuring range: 20 meters
Frequency range: 6.8GHz
Accuracy: 0.1%FS
Medium temperature: -40 to +130 °C
Process pressure: -0.10.3Mpa
Power supply: 24vDC (two-wire, four-wire optional)
Signal output: 4...20mA/HART (two lines/four lines)/ RS485/Mod bus
Process connection:Thread
Protection level: IP67
Explosion-proof grade: Exia IIC T6 Ga
Product overview
Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a -type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, low starting flow, high measurement accuracy, and no pressure loss.
The main unit can be installed in the wall, instrument box, and distribution box with a protection level of IP67. The external clip sensor is installed on the surface of the pipe and selects different sensors. The applicable diameter is DN15~DN6000mm.
Product features
1. Simple installation, no need for professional workers
2. High precision and low price
3. Can work in humid and water-immersed environment
GMF200 Series Ultrasonic Flowmeter
Model GMF200-D
Principle Ultrasonic time difference principle
Precision ±1%
Display 4x8 Chinese or 4x16 Western dot matrix backlit LCD, supporting Chinese, English, Italian and French languages
Output 1 channel OCT pulse output (pulse width 6-1000ms, default 200ms)
Data interface Isolating the RS-232 application interface, the flow meter can be upgraded through a PC
Pipe Steel, stainless steel, cast iron, copper, PVC, aluminum, fiberglass, and other dense pipes, allowing lining
Pipe inner diameter 15-6000mm
Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, from the pump outlet 30D (D is the pipe diameter)
Medium Water, sea water, sewage, acid and alkali, alcohol, beer, various oils, etc.
Fluid temperature -30~+160�°C
Turbidity 1000pmm bubble content is small
Flow rate 0±10m/s
Working environment Host: -20 ~ +60 C; flow sensor: -30 ~ +160 C
Host: 85% RH; sensor protection grade: IP67
Power supply 3-cell rechargeable Ni-MH battery with 1.2V capacity of 2000mAH, which can work continuously for more than 12 hours every time.
Power consumption 1W
Housing material Flame retardant ABS
Host weight 390g
GMF200-H series hand-held ultrasonic flowmeter realizes non-contact measurement of liquid flow. Install the sensor on the outer wall of the pipe to complete the flow measurement. With small size, easy to carry, accurate measurement and so on.
Widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow calibration, temporary detection, flow inspection, water meter balance debugging, heating network balance debugging, and energy saving monitoring. It is a necessary tool for timely flow detection.
