1, Wuhan H-RED outdoor furniture Co., LTD was established in 2005. 2, Our main scope of products cover various sorts and varieties outdoor furniture series including patio table & chair, flower box, etc. 3, We employed 200 skilled workers and a group of professional technicians, engineers, salesmen, QC members and designers to enlarge productivity scale. 4, We are the manufacturer and can offer our customer with high quality outdoor product at a competitive price. 5, Thanks to our Steady Quality, Competitive Prices, Delivery on Time, our customer are all over the world, from America to Australia, Middle East and Africa, etc. H-RED3 1, Material: wood 2, Size: L1200--L2000mm (you can require) 3, MOQ: 20GP 4, Payment term: 30% TT deposit, the balance against the copy of B/L.
1, Wuhan H-RED outdoor furniture Co., LTD was established in 2005. 2, Our main scope of products cover various sorts and varieties outdoor umbrella and Tent, outdoor furniture series including patio table & chair, flower box, etc. 3, We employed 200 skilled workers and a group of professional technicians, engineers, salesmen, QC members and designers to enlarge productivity scale. 4, We are the manufacturer and can offer our customer with high quality outdoor product at a competitive price. 5, Thanks to our Steady Quality, Competitive Prices, Delivery on Time, our customer are all over the world, from America to Australia, Middle East and Africa, etc. H-RED1 outdoor table and chairs 1, Material: wood 2, Table: diameter 90cm, high 75cm (you can require) 3, Chair: 55cm*60cm*90cm (you can require) 4, Umbrella: diameter 2700mm, high 2500mm (you can require) 5, MOQ: 20group 6, Payment term: 30% TT deposit, the balance against the copy of B/L.
1, Wuhan H-RED outdoor furniture Co., LTD was established in 2005. 2, Our main scope of products cover various sorts and varieties outdoor furniture series including patio table & chair, flower box, etc. 3, We employed 200 skilled workers and a group of professional technicians, engineers, salesmen, QC members and designers to enlarge productivity scale. 4, We are the manufacturer and can offer our customer with high quality outdoor product at a competitive price. 5, Thanks to our Steady Quality, Competitive Prices, Delivery on Time, our customer are all over the world, from America to Australia, Middle East and Africa, etc. H-RED5 1, Material: wood 2, Size: L1200ªL1800mm (you can require) 3, MOQ: 20GP 4, Payment term: 30% TT deposit, the balance against the copy of B/L.
Specifications Large stock Competitive price Good quality 1, grade:cold work mould steel(d2/din1.2379/cr12mov1). 2, specification:dimension:20-500mm*50-1200mm. 3, chemical composition: C=1.40~1.60, mn=0.30~0.50, si=0.30-0.50, s 0.025, cr=11.0~13.0, mo=0.70~1.20, v 0.08 4, annealed hardness:hbs=207-255 5, application:used for various high precision, long-life cold work mould and tool, like:punching mould could squeezing mould. 6.Payment terms:30% t/t deposit in advance Unpacking or customized packing
size:chair:65*65*85cm table:120*70*65cm
1, Wuhan H-RED outdoor furniture Co., LTD was established in 2005. 2, Our main scope of products cover various sorts and varieties outdoor umbrella and Tent, outdoor furniture series including patio table & chair, flower box, etc. 3, We employed 200 skilled workers and a group of professional technicians, engineers, salesmen, QC members and designers to enlarge productivity scale. 4, We are the manufacturer and can offer our customer with high quality outdoor product at a competitive price. 5, Thanks to our Steady Quality, Competitive Prices, Delivery on Time, our customer are all over the world, from America to Australia, Middle East and Africa, etc. H-RED2 1, Material¡¡: wood¡¡ 2, Size: L2000mm*W600mm*H300mm (you can require) 3, Umbrella: diameter 2700mm, high 2500mm (you can require) 4, MOQ: 50 piece 5, Payment term: 30% TT deposit, the balance against the copy of B/L.
A commonly used material, qualified quality, reasonable price, Quick service. 1.Electric furnace and electro - slag steel 2.We can make large - sized materials. 3.The factory has got more than 10 years production experience Specification Round bars dia 50mm-340mm length 14000mm Flat steel thickness 20mm-300mm width 1600mm length 13500mm Hot work mold steel (forging) The similar grades of Foreign countries Gb 4cr5mosiv1 Aisi H13 Jis Skd61 Din 1.2344 Ks Chemical Composition (gb) % C Cr Si Mo V Mn P S 0.32-0.42 4.75-5.50 0.80-1.20 1.10-1.75 0.80-1.20 0.20-0.50 Performance H13 die steel has excellent heat strength and hardness, high abrasive resistance and toughness, good hardening properties; high dimensional stability at heat treatment, also pretty good property of resistance to cold and hot fatigue. Applications Used for making hot squeezing mould, forging mould, hot extrusion dies, heat-resistant steel . Nude packing or packed with steel wires
Very good toughness by ESR treatment, bear higher temperature with good cutting and smoothing natures to safeguard its long usage; Applied in aluminum, zinc and copper-based alloy pressure and forged moulds or other hot forged moulds like shear blades, smoall size steel is the ideal material for making mandril and ejector sleeve as well as for making frequently used plastic moulds.
Very good toughness by ESR treatment, bear higher temperature with good cutting and smoothing natures to safeguard its long usage; Applied in aluminium, zinc and copper-based alloy pressure and forged moulds or other hot forged moulds like shear blades, small size steel is the ideal material for making mandril and ejector sleeve as well as for making frequently used plastic moulds.
Hydraulic Rail Puller Rail Tensor,it's suitable for rail 50kg/m,60kg/m and 75kg/m type rail stress relief and seamless long rail relaying. While operating in the field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. By locking the rail waist, it will not hurt the rail head surface, one machine with a variety of configuration meets the field work in different ways, it possesses features of unique design, light weight, simple & convenient manipulation and powerful rail pulling force. The machine can not only be used for repairing the broken rails of seamless tracks, but also can be used for stress relief of seamless tracks and section adjustment of track seams in common tracks, and is suitable for various rail types. Using this product can change the traditional method of repairing broken rails, that is, re-welding in situ without inserting short rails, saving time , Save labor, expand the operating rail temperature range, and prevent the actual lock rail temperature from changing. Railroad Track Tools LG-900 Hydraulic Rail Tensor Product Parameters Model LG-900 Type Hydraulic rail tensor Working Pressure 67 MPa Max. tensile force 900 kN Cylinder stroke 500 mm Locking form Wedge iron lock
The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double - sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk - shaped, the blade on the whole circumference is sharp and wear - resistant, and the service life is long.
Single - side rail chamfering device is a special tool for eliminating the stress concentration at the sharp corner after rail drilling operation. It has the advantages of compact structure, simple operation, small size, light weight and convenient carrying etc. It is an indispensable tool in rail drilling works.
Railway Crow Bar It is for situations such as these that the jim-crow comes into its own. The jim crow was slotted over the rail about four or five sleepers away from the offending joint.and the screw tightened until it engaged with the edge of the rail. Then tightened the screw a further half-turn - thus bending the rail slightly.This process was repeated, moving the jim crow one sleeper nearer the joint each time and each time adding one more half-turn. This introduces a gradually increasing curve to the rail as it nears the joint.If you compare these two pictures with those showing the kinks above, you can see the difference. The amount of bend can be tailored to suit each location - and if it turns out that have made the curve too severe, the jim crow can be slotted on the opposite way round and tightened up to ease the curve. Heavy Duty Crowbar Railway /Rail Craw Bar Rail Maintenance Tools Heavy Duty Crowbar Railway /Rail Craw Bar Rail Maintenance Tools Product Parameters item value Type Crowbar Railway Material Steel Dimensions (L x W x H) (mm) 1500mm, 1800mm Place of Origin China Hubei Brand Name Linkage Item railway crowbar Brand Name Linkage Application Wrecking & Demolition, DiggingChiseling Tip Type Chisel End, Rolled Nail Puller for High Leverage, Heeled Pinch End Length 1500mm, 1800mm Weight 6 KG
Analogue track gauge is used for measuring the railway track gauge, check rail gauge, back to back distance, super-elevation. It is Suitable for railway speed not greater than 160km/h. Traditional compass is more easier for rail workers to accept and operate. Light weight structure is convenient to carry.
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 300*300*150mm Brand Name Linkage Product name rail stopper Usage rail stopper Application rail stopper Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes rail shoe buffer Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches. The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops.
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter �?31-�?32 Chamfering Size 1�?45�°, 2.5�?45�° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter 31-?32 Chamfering Size 145°, 2.5 45° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Versine Measuring Device For easy checking and determination of versines in track track curves . It can be used for all common rail profiles, Magnet type . Benefits Curve versine measuring box, is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model: ZSH-20 Type: Versine Measuring Device Material: Aluminum Dimensions (L x W x H): 100*20*50mm Measure range: 20M Weight: 157G
Product Description Railway switch rail for railway measurement & maintenance The switch rail lateral wear gauge is used to measure the switch rail lateral wear and descent height value of the switch rail, it can be used for all the type of switch rail. BENEFITS Switch Rail Lateral Wear Gauge has the advantages of high measuring accuracy, easy to operate,high reliability,small volume,light weight etc. Specification Material alumunium Dimensions (L x W x H) (mm) 800*20*50mm Place of Origin China Brand Name Linkage Product name Digital switch rail wear gauge Model LJ-JGCM-I Vertical wear measure range 92-193mm Lateral wear measure range 0-120mm Resolution 0.01mm Indication error -0.15~0.15mm Quality Control iso Standard crcc Warranty 1YEAR Certificate CE Package & Delivery Aluminum box + pe bag+pe foam+paper carton, 1 units/carton , carton size:36*25*12mm G.W: 4KG Company Profile Wuhan Linkage track Co., Ltd. established in 2022, we are a rapidly growing company involved in the design and manufacture of an extensive range of equipment for the railway industry. We started our business from producing railway measurement device in 2003 and wide our product range to small rail machines like rail cutting machine ,rail grinding etc . Our company has expanded its operation to include three branch office , location facilitates in Xiangyang ,Wuhan and Guangzhou China. Now, Linkage family of brands provides a diverse and comprehensive product line for different markets and demands. Our products are sold in more than 50 countries and regions worldwide. Market acceptance is backed by ISO9001, European CE certification . As a Chinese mainland based company, we like to take our advantage of low cost and strive to offer you quality products with most competitive pricing with integrity.
Specifications Din 1.2316/420/s136h plastic mould steel 1.Rolled/forged 2.Iso9001:2008 3.100% ut 4.T:12-600mm w:100-1200mm l:2.0-5.8m Detailed product description 1. Plastic mould steel s136h/din 1.2316/aisi 420/3cr17nimnmo 2. Chemical composition: C Si Mn Cr S/p Mo Ni 4. Regular specifications: Rolled flat steel (thickness*width*length) mm Hot-rolled round steel (diameter*length) mm 12-70x155-610*2000-6000mm Dia:12-300mm*2000-6000mm Forged flat steel ( thickness*width*length) mm Forged round steel (diameter*length) mm 35-500*50-1200*2000-6000mm Dia: 50-500mm*2000-6000mm 5. Application: used for plastic mould which needs anti-corrosion and mirror polishing. 6. Payment: l/c at sight or t/t. Unpacked or according to the customers' requested
