1.Size: 810*148*12.3 1218*197*8.3 2. Click system Arc/ double/single 3. Core MDF/HDF 4. Balance paper Grey/yellow/brown/beige 5. Overlay AC1,AC2 ,AC3,AC4 6. Glue E1 7. Groove U/V. 810*148*12.3 1218*197*8.3.
PET aluminum laminated film has excellent physical and mechanical properties as ordinary polyester film, and also has excellent chemical properties. Good transparency, low haze, high glossiness. Mainly used for top grade vacuum aluminizing products, after aluminizing the film act as a mirror, has excellent packaging decorative effect; it also can be used as laser anti-counterfeit base film and so on.
High quality laminated paper board, grey paper board, duplex board, black board, color board, gold & silver board.
PVB is made from PVB resin and plasticizer .It is a non-toxic and smell-free soft sheet material with thickness between 0.2mm-2mm, the best material for the interlayer of safety glass as its wonderful product property such as anti-penetration, anti-ultraviolet, sound proof etc Technology & product size 1. Item\Classification: 0.38mm / 0.76mm / 1.52mm 2. Thicknesses (mm): 0.38í+0.02 / 0.76í+0.04 / 1.52í+0.08 3. Length tolerance (m): 0-5 / 0-2 / 0-1 4. Width tolerance (mm): 0-10 5. Uniformity: Horizontal thickness warp shouldnt exceed 15 um at a distance of 25mm; Horizontal thickness warp shouldnt exceed 20 um at a distance of 50mm; 6. Appearances: Achromatic or slightly yellow lucid film, with velvet surface that has no scar or crease 7. Dotted waste sundries and air bubbles: í_0.05mm2: Allowed if exist separately, but not exceeding 10 places per film ú+0.05mm2: Not exceeding 8 places per film. / Making marks. Define an extended 0.5 meter film per place. Add one extra meter per place 8. Moisture content (%): 0.4-0.6 9. Extending intension (Mpa):í¦20.0 10.Rupture extending rate (%):í¦200 11.Surface roughness Rz (ª-c=2.5mm ): 15-45 12.Fog rate (%) :ú+0.4 13.Shrinking rate (60íµ/15min) (%):í_12% 14.Whacking value:ú+5 Every Layer of the PVB film is separated by PE film, and then vacuumed by aluminum foil. Each rolls packaged in fumigated wooden case.
Paper and paper board, grey board, laminated paper board, duplex board, black board.
Peel ply, plastic spiral tube, vacuum infusion flow tube, packaging film, engineering maintenance film, floor protection film, vacuum bagging film, fiberglass cloth, stretch wrap film.Export
Eco-friendly, environmental and transparent plastic box tray clamshell punnet for fresh fruit, vegetable, seafood, cake, meat, chocolate 125g, 250g, 300g, 500g, 1000g, 1500g box clamshell, punnet for fruits and vegetables, like cherries, strawberries, blueberries, oranges, apples, pears, nectarines, grapes, etc…
If you want to sample thin film ceramic substrates, you can consider choosing manufacturers based on the following factors: 1. Product quality: Choose manufacturers with good product quality to avoid unnecessary troubles caused by quality problems later on. You can refer to customer reviews, product certifications, industry reputation, etc. to evaluate the manufacturer. 2. Technology level: The manufacturer's technology level and technical strength are directly related to product quality. You can check the relevant qualifications of the manufacturer's production equipment, production processes, and technology, and visit their production line to understand their manufacturing processes. 3. Service experience: Excellent service can help customers solve problems, provide support, especially in communication, exchange, after-sales service, etc. You can learn about the manufacturer's service level through online customer service, phone service, email replies, etc. 4. Cost control: Cost is also a key factor to consider when choosing a manufacturer. You can compare quotes from multiple manufacturers, but also be careful not to sacrifice product quality and service by choosing a low-cost manufacturer.
Product Information: Construction film is a general-purpose poly film that is ideal as a drop cloth or vapor barrier. Construction Film can be protection from weather, dust and debris, or chemicals. PE films used in the construction industry play an important role in covering specific spaces and protecting valuable equipment and machinery. It can be used for protection against the elements, dust, dirt and dampness. XXW-N-PE: 4-30um Thickness, 0.5-8m Width, 80-240m Length, PE (New); XXW-O-PE: 4-30um Thickness, 0.5-8m Width, 80-240m Length, PE (Old); Product Advantages: Various widths and thicknesses of industrial packaging film, engineering construction film, Black plastic film, white plastic film, rain-proof film. Can be customized according to the size and specifications required by customers. 1.The polymer material in the concrete curing film is not easy to volatilize after absorbing water. It can effectively improve the firmness of concrete, reduce cracks and improve economic benefits. 2. High elasticity for packaging 3. Using new raw materials, better quality Warning: This plastic sheeting is not UV resistance treated and not recommended as outdoor covers. 1. Processing Customization Length, width, thickness, color, Logo can be customized 2. Heat insulation, high temperature resistance, antifreeze, not easy to age 3. High transparency, waterproof and moisturizing, not easy to break 4. Strict packaging, so that every roll of goods is brand new in your hands Raw Materials: High molecular polyethylene raw material, high strength, no peculiar smell, not easy to volatilize and rot, no impurities. long lasting. Scenes To Be Used: 1. Concrete moisture proof 2. Anti-dry cracking of buildings 3. Road Maintenance 4. Product Packaging
Product Description: Vacuum bag film is a high elongation, high strength, transparent film. This type of vacuum bag film has a higher tensile strength and not easily damaged during the operating process. A five-layer co-extruded type vacuum bag film, which has been widely recognized by the market and can provide greater security. Vacuum bag film has a higher tensile strength and elongation at break, the recommended maximum operating temperature is 150 Celsius, suitable for the vacuum infusion processing of unsaturated vinyl resin and epoxy resin etc., this type of bag film is widely used in the vacuum infusion molding process of wind energy structure, car industry, yacht industry and others. It is the best choice of the autoclave process at low temperature. Transparent and light yellow, so it is easier to observe the state of resin. High temperature resistant vacuum bag film, temperature resistance up to 230 Celsius, high tensile strength, It can be used in curing furnaces and autoclaves, has good barrier properties under high temperature and high pressure, and is suitable for vacuum bag technology of various resin systems. Product Specifications: CVF120: Polyester; 120 Celsius, 50/65/75m Thickness, 1200-14000mm Width; CVF150: Polyester; 150 Celsius, 50/65/75m Thickness, 1200-14000mm Width; CVF170: Polyester; 170 Celsius, 50/65/75m Thickness, 1200-14000mm Width; CVF200: PA; 200 Celsius, 50/65/75m Thickness, 1200-14000mm Width; CVF230: PA; 230 Celsius, 50/65/75m Thickness, 1200-14000mm Width; Product Features: Superior performance and wide application process conditions. High temperature resistance and high strength provide guarantee for higher quality parts forming. A variety of sizes are available, reducing process waste and reducing use costs. Scenes To Be Used: Vacuum infusion molding process of wind energy structure, car industry, yacht industry and others
PE release film does not have viscidity or slight viscidity contact with specific material under the limited conditions. It is a tangigle polyethylene film, using as separator films or release film for sticky substrates. The embossing reduces the contact surface between the film and the substrate, thereby trappign the air. This makes it easy to remove the film again.Normally in order to increase the release force of the film, then do plasma treatment to the film or coated with fluorine, to make it act out the light and stable release force to different organic pressure glue. According to different release film , the release force is different, the viscidity of release product glue is different , to adjust the release force, to make it have the light and stable release force during peeling.
PE Shrink film is usually used in the packaging of food ,beverage,asphalt tiles and large equipment or goods etc.Packaging with PE shrink film could largely reduce the cost of the package.Film with high strength could also protect the good during the transportation.We could print the product information or your Logo on the film. PE Heat shrink film is used for the sale and transportation of various products, and its main function is to stabilize, cover and protect the product. The shrink film must have high puncture resistance, good shrinkage and certain shrinkage stress.
Card Making ,lamination
Laminated flooring.
Shrink film, metallized paper, shrink sleeve label.
I. Main technical parameters Model:9040 Degree of automation:Full-automation Max. width of feed material:900(mm) Max. unwind diameter:1200mm Max. die-cutting speed:9000(time/h) Max. cutting size:900mm*400mm Machine weight:3100(kg) Die-cutting form:Platen die-cutting machine Total power:9kw Machine size:4000*1800*1700mm II. Performances and applications 1. Patented product, high technical assurance, each performance index has exceeded the level of other counterparts. Patent No. ZL 200920267779.8 2. Load material: Electric roll material loading, which is easy and fast. 3. Feed material: the photoelectric eye tracking system assures the synchronization of material feeding and die-cutting speed. Automatically fold and flatten the cornering materials at the paper core. It realized the multistage adjustment of the folding degree. No matter how bent the product is, it can be flatten or refolded towards other directions. 5. It can die-cut according to the printed words and figures or simply die-cut without them. The coordination between stepping motor and photoelectric eye which can identify colors assures the perfectly fit of the die-cutting position and figures. Simply set the feed length through the micro-computer controller To die-cut the products without words and figures. 6. Die-cutting area: 900mm*400mm. (it can also be tailored according to the customers requirements) 7. Maximum die-cutting speed can be up to 9000 times/h, which indicates the significant high production efficiency. 8. The die-cutting force is provided by a 7.5kw inverter motor driver. It is not only power-saving, but also can realize the stepless speed adjustment, especially when coordinate with the extra large flywheel, which make the die-cutting force strong and steady, and the electricity can be further reduced. 9. Adapt flat bed die-cutting mode, and the cutting boards are extremely cheap. 10. The oscillating lower cutting board makes the die-cutting process more steady compared to other similar products and magnificently increased the service life of the cutting board. 11. Finished products are pulled out by two rollers. Comparing to other similar die-cutting machines which need extra press cutter to cut the joints, our machine can not only save the cost of press cutters of each machine, but also avoid the troubles of installing and debugging the press cutters, which can magnificently save time. Especially, it can assure better quality of the product appearance when the die-cutting without joints can be realized under many conditions. 12. By the action of the entity induction switch, finished product will be automatically lowered down to remain the height of the pilling paper unchanged, during the whole die-cutting process, manual paper-taking is not needed. 13. Through micro-computer controller, it realized automatic calculation, automatic alarm and stop by lot. Wooden case packaging
The base material of the PET separator is PET, that is, a layer of silicone oil is coated on the surface of the PET film to reduce the adhesion on the surface of the PET film and achieve the effect of release. Conventional thickness from 25um to 150um. There are hot and cold tear and matte surface, after anti-static and anti-scratch treatment, the product has good adsorption and fit. PET film has high temperature resistance, temperature resistance over 220 , and the elongation at break is generally about 30%.
Aluminum strip, aluminum foil, aluminum coil, aluminum sheet, perforated aluminum strip, aluminum strip coated with polypropylene.
PVC card making machinery and plastic card consumable, PET card lamination machine, ABS key tag making machine, smart card punching machine, RFID gear.OEM, plastic card processing service
PVB interlayer for the laminated glass, auto glass, archi glass.
