Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at 240 °C (400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings Processing Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon FEP D50. A FEP resin coating on woven fabrics made of fiberglass, fiber, or other high-temperature resistant fibers, can be made by dip coating. Successive passes may be necessary to build the desired thickness to produce a smooth, crack-free coating. Each coating layer is usually dried to remove water (typically at 120 °C [250°F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), and then heated above the crystalline melting point of the resin particles (approximately 265 °C [509 °F]). If the Everflon FEP D50 is being used as a top coat over a PTFE-coated fabric or other parts, the coating must be heated to melt the PTFE (approximately 337 °C [639 °F]) to maximize adhesion. Other solid or liquid ingredients can be added to Everflon FEP D50 to provide specific processing or finished product behavior
Usage of the Product: The Pinao water-soluble liquid may be supposed widely use in different area, such as coating, building materials, papermaking and so on. When the product uses in coating, it does not only have the function about covering, decorating and the protecting to the wall, but also shows us different culture in the building through the unique humanities view. The product appearance is stable; good quality can be storing does not agglomerate, and convenient to use. The Strength of the Product: 1, The tinting strength are strong, the exhibition color is good, has the soft good impermissibility with the resin, has the water charactersystem's versatility, is suitable in each water paint the coloration. 2, The light resistance, the weathering resistance and the alkaline resistance are perfect, the cover performance is good which is suitable for each kind of system coloration, we can guarantee the outstanding performance in outdoors area.. 3, The Pinao shuanglikaluo hose 55 type Colorants, its light resistance reaches 7-8 levels, the PH value is about 7-9, the product itself grinds degree of fineness below 20 particles which fit the national standards. 4, The packing are diverse: shuanglikaluo 55 hose color thick liquid, 100g, 1000g, 50 makes per packaging the retail sales is convenience which suitable for the family which use small amount each time. Alliance Policy: ¡¡ãpinao¡¡À the serial products, hopes with the general distributor communal development, presently allies the locally administered level: First batch stocks with goods 50,000 Yuan. Provincial capital city: The first batch inventory amounts to 100,000 Yuan .We do not collect the alliance expense, does not collect the rights and interests earnest money, after the conclude and sign contract, the preferential benefit provides the color mixer, the airless spraying machine and the high accuracy emperor scale, and mixes colors the color schemes book which needs, true zero risk alliance system. Enterprise honor: Our Company already pass through the ISO9001 and ISO4001 certification. The Enterprise products already pass through the China Environmental Labeling Scheme Certification, and widely use in the housing, the villa, the hotel and so on, the color thick liquid also use in the construction, the papermaking etc. Manufacturer¡¡¥s ability: Production for coating 8000 tons/year. Production of Color thick liquid 600 tons/year. Performance and Merits: Attains GB/T9755, GB/T9756 and GB18512 Certification. Colorants: 5kg/loaded in barrels, 1kg/bottled, 100g/hose Product use: The construction use, the inner and the outer wall decoration. The Post-Sale service: The 24-hour hotline is the same in China. Once technical Support from our Engineer each year which helps the distributor to rise up the skill when using the product. The Packaging: Coating: 20kg vat, keg 6kg.
Paper and paper board, grey board, laminated paper board, duplex board, black board.
Fiber Cement Board Size:2440*1220mm Thickness:4,6,8,9,10,12,14,16,18,20,24mm Density:1.3g/cm2 Fireproof:A1 No asbestos Application: Backer Board,Interior Decorative,Exterior Cladding ect.
It is mainly used for floor intermediate coating and sealing of indoor places with high environmental protection requirements. Each group is divided into two components at the proportion of 20:4, weighing 24kg. It is mainly used for floor intermediate coating and sealing of indoor places with high environmental protection requirements, featuring environmental protection, low VOC content, thinning after adding water, large area application, strong filling performance and easy construction.
High quality laminated paper board, grey paper board, duplex board, black board, color board, gold & silver board.
Gold Acrylic Metallic Paint is a low odour, water-based acrylic paint which can be applied to concrete, gypsum, wood and also metal to provide a gold effect finish. It is formulated for application by roller, brush and spray, providing a uniform distribution of metallic gold pigment across the substrate, giving a smooth finish. Features Low odour, environmental-friendly Smooth, metallic effect finish Easy to apply Fast dry
It is mainly used for anticorrosion and decoration for steels like various C-type steel, H type steel, Z type steel, outdoor handrail, etc; featuring large area application, good color, primer-topcoat combination, reducing construction operations, high performance price ratio, thinning after adding water, environmental friendly, no harm.
The product is used for all objects required with golden surface coating like Buddha, crafts, etc. The product is environmental friendly, non-harmful, thinning after adding water, and is used for all objects required with golden surface coating like Buddha, crafts, etc., featuring good gold-like gloss, good decoration.
The product is environmental friendly, non-harmful, thinning after adding water, and is used for sealing wood, featuring good permeability, good sealing, easy grinding.
The product is environmental friendly, non-harmful, thinning after adding water, and is used for wood surface coating with exposed texture, featuring good permeability, high transparence, easy grinding.
1. Decorative antirust paint for civil metal objects including balcony, windowsill, handrail, guard bar, etc. 2. Antirust and decoration for steel pipe scaffold, featuring large area application, good decoration, high performance price ratio, fast drying, excellent antirust performance, applicable for construction methods like spraying, brushing, immersing, etc. It is one new generation single-component waterborne metallic paint and is composed of low temperature self-crosslink filming waterborne resin, nano-functional materials, metallic pigment, various special modified agents and auxiliaries, featuring low VOC content, good decoration performance, large area application and high performance price ratio. It is applied to steel pipe scaffold antirust and decoration, ordinary metal steel structure, construction steel structure formwork antirust and decoration.
It is mainly used for anticorrosion of metal workpieces, bridge steel structures, pipeline handrail, etc., featuring large area application, high performance price ratio, thinning after adding water, environmental friendly, no harm.
With the development of society people have higher and higher requirements for the safety and reliability of power consumption. High-voltage circuit breakers have the dual tasks of control and protection in the power system. The performance of the power circuit is directly related to the safe operation of the power system. The mechanical characteristic parameter is one of the important parameters for judging the performance of the circuit breaker. The Breaker Analyzer is a special instrument developed by the company to meet the needs of various high-voltage switch operating characteristics tests. It can accurately measure low-oil multi-oil vacuum sulfur hexafluoride and other high-voltage circuit breakers of various voltage levels. Mechanical dynamic characteristics parameters. For circuit breakers with closing resistors the closing resistor and switching waveform can be accurately measured. The instrument adopts large screen display Chinese characters prompt man-machine dialogue mode operation Chinese characters display results and printouts with intelligent multi-function accurate data strong anti-interference simple operation small size light weight and beautiful beauty. Product nickname High-voltage switch mechanical characteristic tester switch mechanical characteristic tester high-voltage switch comprehensive tester circuit breaker dynamic characteristic tester circuit breaker mechanical characteristic tester circuit breaker comprehensive tester high-voltage switch time characteristic tester high-pressure Breaker Analyzer Breaker Analyzer circuit breaker tester switch mechanical characteristic tester switch parameter tester
Product Introduction With the development of society people have higher and higher requirements for the safety and reliability of power consumption. High-voltage circuit breakers have the dual tasks of control and protection in the power system. The performance of the power circuit is directly related to the safe operation of the power system. The mechanical characteristic parameter is one of the important parameters for judging the performance of the circuit breaker. The Breaker Analyzer is a special instrument developed by the company to meet the needs of various high-voltage switch operating characteristics tests. It can accurately measure low-oil multi-oil vacuum sulfur hexafluoride and other high-voltage circuit breakers of various voltage levels. Mechanical dynamic characteristics parameters. The instrument adopts large screen display Chinese characters prompt man-machine dialogue mode operation Chinese characters display results and printouts with intelligent multi-function accurate data strong anti-interference simple operation small size light weight and beautiful beauty. Product nickname High voltage switch mechanical characteristic tester High voltage switch comprehensive tester Circuit breaker dynamic characteristic tester Circuit breaker mechanical characteristic tester Circuit breaker comprehensive tester High voltage switch time characteristic tester High voltage switch characteristic tester Switching characteristic tester Breaker Analyzer Switch parameter tester
Color paper & board, paper bag, crepe paper, corrugated paper, bubble envelope, exercise books, hardcover notebooks.
Eco-friendly, environmental and transparent plastic box tray clamshell punnet for fresh fruit, vegetable, seafood, cake, meat, chocolate 125g, 250g, 300g, 500g, 1000g, 1500g box clamshell, punnet for fruits and vegetables, like cherries, strawberries, blueberries, oranges, apples, pears, nectarines, grapes, etc…
Paper cups, bowls & boxes, plastic cups, bowls & boxes, pe coated paper fan or in roll, paper/ plastic straw, plastic llids.
I. Main technical parameters Model:9040 Degree of automation:Full-automation Max. width of feed material:900(mm) Max. unwind diameter:1200mm Max. die-cutting speed:9000(time/h) Max. cutting size:900mm*400mm Machine weight:3100(kg) Die-cutting form:Platen die-cutting machine Total power:9kw Machine size:4000*1800*1700mm II. Performances and applications 1. Patented product, high technical assurance, each performance index has exceeded the level of other counterparts. Patent No. ZL 200920267779.8 2. Load material: Electric roll material loading, which is easy and fast. 3. Feed material: the photoelectric eye tracking system assures the synchronization of material feeding and die-cutting speed. Automatically fold and flatten the cornering materials at the paper core. It realized the multistage adjustment of the folding degree. No matter how bent the product is, it can be flatten or refolded towards other directions. 5. It can die-cut according to the printed words and figures or simply die-cut without them. The coordination between stepping motor and photoelectric eye which can identify colors assures the perfectly fit of the die-cutting position and figures. Simply set the feed length through the micro-computer controller To die-cut the products without words and figures. 6. Die-cutting area: 900mm*400mm. (it can also be tailored according to the customers requirements) 7. Maximum die-cutting speed can be up to 9000 times/h, which indicates the significant high production efficiency. 8. The die-cutting force is provided by a 7.5kw inverter motor driver. It is not only power-saving, but also can realize the stepless speed adjustment, especially when coordinate with the extra large flywheel, which make the die-cutting force strong and steady, and the electricity can be further reduced. 9. Adapt flat bed die-cutting mode, and the cutting boards are extremely cheap. 10. The oscillating lower cutting board makes the die-cutting process more steady compared to other similar products and magnificently increased the service life of the cutting board. 11. Finished products are pulled out by two rollers. Comparing to other similar die-cutting machines which need extra press cutter to cut the joints, our machine can not only save the cost of press cutters of each machine, but also avoid the troubles of installing and debugging the press cutters, which can magnificently save time. Especially, it can assure better quality of the product appearance when the die-cutting without joints can be realized under many conditions. 12. By the action of the entity induction switch, finished product will be automatically lowered down to remain the height of the pilling paper unchanged, during the whole die-cutting process, manual paper-taking is not needed. 13. Through micro-computer controller, it realized automatic calculation, automatic alarm and stop by lot. Wooden case packaging
Laser ceramic printer, ceramic toner, laminating paper, decal paper, hand-painted paint, gold pen, ceramic products.
