We have our own Anti-Corrosive Carbon Bricks production line, welcome to visit our factory at any time! Anti-Corrosive Carbon Bricks Anti-corrosive carbon brick is made by a unique technological process from high-quality carbon-containing materials and acid-proof organic compound, which is shaped under high pressure and bonded by high-strength gum. It, with excellent acid-resistance, is a kind of ideal lining material for the large acid-proof and corrosion-resistant vessels in chemical and metallurgical industry. It is green environment protected products. Characteristics Acid proof and corrosion-resistance Using high-grade carbon-containing materials and adding acid proof organic compound, it, with low porosity and high bulk density, is so hard to be corroded by acid or alkaline solution. High temperature resistance, long lifetime It has much higher proof high-temperature of top to 350�°C and abrasion-resistance than traditional rubber products. It has scarcely any change with temperature going up due to its bonding and additive. So, its lifetime is long. Accurate dimensions It can fully satisfy the requirements of constructionâ??s technology because the brick has properties of high quality of shaping and accurate dimensions. We can also manufacture specific form bricks with customersâ?? requirement. Typical application The lining of phosphoric acid reactor The lining of acid-washing launder The lining of carrying phosphate acid storage can and hydrochloric acid storage can in railway industry The lining of desulphurizing tower of exhaust gas and chimney in power plant
Anti-corrosive carbon brick is made by a unique technological process from high-quality carbon-containing materials and acid-proof organic compound, which is shaped under high pressure and bonded by high-strength gum. It, with excellent acid-resistance, is a kind of ideal lining material for the large acid-proof and corrosion-resistant vessels in chemical and metallurgical industry. It is green environment protected products. Typical application The lining of phosphoric acid reactor The lining of acid-washing launder The lining of carrying phosphate acid storage can and hydrochloric acid storage can in railway industry The lining of desulphurizing tower of exhaust gas and chimney in power plant
The small classic tea brick with character Chuan. It is cost-effective,easy to take and good for give your freiends as a present. Product Description: 350g*1pc/Total net weight:350g Feature(100% Natural): Classical tea brick, smooth surface and easy to take. Environmentally friendly materials, full clean produce procedure. Smell sweet, soup is clear. Rich in polyphenols, tea polysaccharides, etc, that are beneficial to human health. Slimming, detoxification, promote gastrointestinal health. Drinking method: Take 10-15g tea by knief,put into teabag,then use 100� water wash the teabag,then put into teapot,boil for 3-4 minutes, you could move teabag and enjoy your Changshengchuan tea!
Tgs p/n cfa450/455w (lt450/455w) Dim.(mm) 11.0x8.0x7.0 Frequency 450khz/455khz Main features : 6db bandwidth: G¦2khz to G¦15khz Attenuation: 40 ~ 60db min Insertion loss: 6db max
this section of the ceramic substrate design concept is to allow high power, small size, high brightness LED use development designed to replace a section merit system board, directly to multiple LED chip package on top, and then by the second optical lens more compact size makes the product volume and let your light LED products reduce the area, reducing materials, system cost, the human cost of replacing the assembly, so that you package more quickly, Wire bonding the chip directly on the substrate, with the use of ceramic heat with excellent results, but also allow your LED brighter and longer life. This product suitable for high power LED's package, such as: LED lights
Microcrystal Glass Ceramic Tile Grinding Machine 3D Microcrystal Glass Ceramic Tile Machine ceramic tile grinding machine Machine parameters Working speed:1-5m/min Grindingthickness:2-30mm Max grindingsize:2000*2000 Min grindingsize:20mm*20mm Machinesize:2000*1100*1620 Voltage:380v Power:9.55KW Weight:1200KG Machine characteristics 1. The key parts of the machine adopts cast iron material, and is formed by natural effects processing which has the advantages of smooth, beautiful appearance, deformation and so on. 2. Method of clamping part imported from Italy PUPL synchronization with horizontal transfer, which greatly improve the precision of grinding, grinding parts adopt high-precision grinding head motor. 3. The configuration of the machine is chamfer with two wheels and flat two grinding wheels. It can realized the purpose of chamfer edge polishing and flat,edges and chamfers fine grinding.
3D microcrystal glass ceramic tile machine Ceramic tile background wall machine Backgroud wall China wholesale digital photo printing machine price can be printed on many different materials, like ceramic, leather, glass, metal, leather and so on. it can automatic clean and control by computer. so it can print almost any design only you have the HD picture. Main Features 1, Special for printing on ceramic tile and glass 2, Automatic lifting platform, easy to operate, reduce the alignment error 3, Mist spray or line spray printing method ca n be choose, line spray speed up, mist spray exquisite and lifelike to eliminate drawing dice 4, Three-stage scraping and peristaltic pump device to prevent nozzle clogging, extended nozzle life 5, Automatic cleaning and nozzle moisturizing device to ensure the fluency of the ink and prevent nozzle cloggin Any location can be set as the print origin, operation is simple and easy to learn 6, Silent linear guide, stable performance, high precision, pass the European CE certification, quality is guaranteed comparatively 7. Equipment printing platform has a scale to facilitate the visual measurement and display of the printed materials 8. Using imported LED-UV lamp, cold light source, no radiation, ultra-low power consumption, environment-friendly and energy-saving.Double servo motor, control the performance is more stable.
strate name:custom design service for ceramic metallized substrates Substrate material thickness:0.635mm Conducting layer:Cu, Ni, Au Thickness of metal layer:300�¼m Surface preparation:immersion gold Metal single-sided / double sided:single sided Copper plated through hole:no Solder mask:no
ceramic circuit board with Led heat dissipation and long service life Folysky Technology (Wuhan) Co.,Ltd.is a professional high-tech enterprise engaging in planar and curved non-metallic base planel, electronic circuit board and electronic components which integrates research and development, production and sales. It has a unique technical advantage in the direct graphics of PCB by developing the powerful wuhan photoelectric national laboratory. The company's main product is ceramiccircuit board, such as alumina ceramic circuit board,aluminum nitride ceramiccircuit board, zirconia ceramic circuit board, glass circuit board,LEDceramic circuit board (including 2D and 3D circuit board), Â with self-developed technology of Laser rapid Activation Metallization (Laser Activation Metallization, LAM technology for short). High bonding strength and good electrical performance between metal and ceramic can be repeated welding. Metal layer thickness is adjustable in 1 mu m - 1 mm. L/S resolution can reach 10m, which can realize sealing plating directly, form double-sided substrate, and provide customized, high density PCB solutions for customers. At present, the conventional LED lighting system on the market has the quality problems caused by poor heat dissipation and short life of the driving power. The inconvenience of maintenance and repair also limits the LED lamp's comprehensive replacement of traditional lamps to a certain extent. The ceramic circuit board produced by our company has a strong heat dissipation capacity, and the installation of ceramic circuit board on the LED lamp is long life! You are totally worth it.. 3535 technical parameters of ceramic circuit board: Base material type: alumina ceramics Substrate material thickness: 0.5mm Conductive layer: Copper Thickness of metal layer: 35 mu m/35 mu m Surface treatment: heavy silver One side / double side of metal: double side Copper plated through holes: Yes Resistance welding: Yes
The photosensitive sensor is currently the highest yield, the most widely used sensor, exist in the form of photosensitive resistance, along with the change of light intensity, the resistance value is also relatively change, resulting with the light intensity of the pulse signal. The structural elements of common cadmium sulphide photosensitive electrode are: electrode / cadmium sulfide / ceramic substrate / wire / resin moisture-proof film, etc.. Ceramic substrates have been widely used in photosensitive resistors. Product features: The ceramic circuit board has high accuracy and good electrical and thermal properties 2. Ceramic circuit board with high bonding strength and good weldability, can realize blind through hole 3. Ceramic circuit board technology is mature, environmental protection, pollution-free, cost is lower than traditional technology 4., a wide range of applications, single-sided and double-sided three-dimensional ceramic circuit boards can be produced 5. Customized production, without mold opening, short production cycle 6., no organic ingredients, resistant to cosmic radiation, high reliability in aviation and space, long service life. 7. Can carry out high-density assembly, line / pitch (l/s) resolution can reach 20 m, so as to realize the integration and miniaturization of equipment. 8. High frequency loss, it can be used in high frequency circuit. 9. Copper sealing, high reliability. 10. 3d substrate and 3d routing. 1. Ceramic circuit board appearance size is not limited 2., ceramic laser printing, three-dimensional routing 3. Ceramic circuit board without mask, fast response 4. Ceramic circuit board technology is mature, environmental protection, pollution-free
* price:$4750(second hand) $10800(new one) * Installed ceramic toners C,K,M,Y total 1kg * Biggest covering wide A3+ (297x940mm,can also add to 30.5cm*1.2m) * Printing precision 1200x1200dpi * Printing speed 35pages/minute 145 square metres /hour * 160% coverage can print 5500pcs 5” images
Model nominal insertion terminating holder Type Freq. Loss impedsnce (mhz) (db) (ke¬/pf) 8mf15a 8.448 1.0 3.0 cu Ct
Carbon brick, refractory brick.
Ceramic printer and toner for xerox.
3d ceramic tile machine, 3d tile machine, leather wall panel machine, 3d wall panel machine.
Ceramic tiles.
Crafts, porcelain, ceramic, pottery, figurine, statue, antique.
Ceramic tiles,wooden floors.
Output coupler, folding mirror and rear mirror being used inside laser cavity, reflectors, reflective phase retarded, atfr mirror, lenses and other optics being used at beam delivery system), high power fiber laser optics, nozzles, ceramic rings.
We're mainly research and produce laser ceramic toner for laser ceramic printer. Now we have produce different series of laser ceramic toner successfully for all the XEROX brand models and parts of KONICA MINOLTA models(250, 350, 252, 352). Our toner is the round and smooth physical appearance. This will have a good mobility when the laser ceramic printer works. This is realy important specially for the high resolution image printing. We have tested many kinds of ceramic pigment from many companys over domestic and abroad. Finally choose a kind of show wonderful color rendering performance one as our original material to produce the ceramic toner. For more customers demand, we produce not only CMYK, but also RGB and glaze, white color toner to make the laser ceramic printing crafts can realize more ceramic decal printing apply.
