B)film faced plywood
1)size 1220 x 2440mm, 1250 x 2500mm
2)thickness 12mm, 15mm, 18mm, 21mm
3)core species poplar, birch, hardwood, combined or requested by clients
4)glue wbp, melamine
5)film import brown film, chinese black or brown film
6)grade a/a grade
7)packing standard exporting packing by pallet
8)application field concrete forming for construction
The size is 1220x2440mm, thickness from 2.5mm to 25mm, the material is poplar, produced by two line, chinese machine or imported machine, density is 700~840
Our main product is fancy(decorative) plywood, including natural veneers and recon veneers , such as walnut, ebony, ash, cherry, maple, red oak, white oak, sapelli, steem beech, mahogany and so on. We also handle with blockboard and mdf.
My factory, produce manufacturing and export:
1)acoustical mineral fiber ceiling board.
2)ceiling board.
3)pvc gypsum board.
4)roast the metals of the paint t l.
5)ceiling t grid.
6)calcium silicate board
Physical data:
Material:wet---formed mineral fiber.
Surface finish:factory---applied vinyl latex paint.
Color:white.
Size: 600*600*(7.5---20)mm.
600*1200*(10---20)mm.
603*603*(7.5---20)mm.
603*1210*(10---20)mm.
Edge : 1)angled tegular.
2)square lay-in.
Light reflectance:minimum lr 0.80*.
Fire resistance:it is grade a fireless material.
Rh70:appropriate for relative humidity up to 70%, temperature up to 30f¦.
No-asbestos.
The box adds the wood tray adds to wrap up the plastics
Box
Size:21/27mm x 500mm x 2500/2000/1500/1000mm
Treated with melamine resin hot-pressed into the surface.
Water resistant.
Colors: yellow.
Edges: protected with paint.
Moisture (8-12%) & densityproducts
Weight(kg/m3)
Birch
About 690
Combined
About 600
Poplar
About 500
Conserve and maintain:
How to cut the best from our film faced plywood
Storage
Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly.
Sealing of edges
Phenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint.
Sealing of holes
Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.
Cleaning and repair
To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiffbrush . It may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete
