Fiber Optic Splice Sleeve was developed to protect and strengthen fusion splices on fiber optic cables. The Fiber Optic Splice Sleeve intends to protect (mechanically) fiber optic splices. The Fiber Optic Splice Sleeve is built from shrinkable plastic tube with metal cylinder inside. The fibers are inserted before splicing into the plastic tube. After making the splice, the shrinkable tube is heated and shrunk on the splice. It can protect the spliced fiber from being break down and unwanted bending and is coated with the plastic tube. It gives to the installer flexibility while using the spliced fibers during installation
The yttrium orthovanadate (YVO4) is a positive uniaxial crystal grown with Czochralski method. It has good mechanical and physical properties and is ideal for optical polarizing components because of its wide transparency range and large birefringence. Photonchina YVO4 has an excellent synthetic substitute for Calcite (CaCO3) and Rutile (TiO2) crystals in many applications including fiber optic isolators and circulators, beam displacers, Glan polarizers and other polarizing optics, etc. Applications of YVO4ï¼? YVO4 crystal produced by Photonchina is mainly used to manufacture Birefringent Wedge of optical isolator and Beam Displacer (BD) of optical circulator and optical beam splitter. YVO4 Wedges or Prisms are also called YVO4 Plates or Blocks. 1. YVO4 Wedge, key components of optical isolator. 2.YVO4 BD, Beam Displacer, used in fiber circulator
SINY OPTIC-COM CO.,LTD. was founded in 2008, is ISO9001 and ISO14000 optical components manufacturer in China. SINY main products: Free Space Optical Isolator Polarization Dependent Isolator Polarization Independent Isolator Collimator Receptacle Receptacle With FA SINY's collimator Receptacle have two type: A-Lens Collimator Receptacle, C-Lens Collimator Receptacle. Please contact us for your special requirement.
SINY OPTIC-COM CO.,LTD. was founded in 2008, is ISO9001, ISO14000 optical components manufacturer in China. Pitail Receptacle With Free Space Optical Isolator is widely used for 100G--400G Optical Module. SINY can produce optical components as your drawing or provide customized design. Please contact us for your demand!
SINY OPTIC-COM CO.,LTD was founded in 2008, is ISO9001 ISO14000 Optical components manufacturer in China, producing Free Space Optical isolator, collimator receptacle, receptacle isolator, FA With Receptacle, Pigtail With Receptacle, In Line Optical Isolator,TOSA,ROSA,BOSA and other components. Receptacle With Fiber Array is widely used for 100G--400G Optical Module. Please contact us for your special requirements.
SINY OPTIC-COM CO.LTD. was founded in 2008, is ISO9001 ISO14000 optical manufacturer in China. SINY main products: Free Space Optical Isolator Polarization Dependent Optical Isolator Polarization Independent Optical Isolator Latching Type Optical Isolator Fiber Array(FA) AWG Receptacle Pigtail Receptacle Fiber Capillary Receptacle Parameters Product: Fiber Array or AWG Material:Quartz &Silicone base V-Groove:250/127(±0.5 um or Specified Polishing Angle: 8±0.3 Channel 5 Channel
SINY OPTIC-COM CO.,LTD(stock code:838719) manufacture and supply 1310nm Wavelength Free Space Optical Isolator For CATV to our customers in Jiaozuo, Henan, China. Free Space optical Isolator is widely used for optical transceiver/modules/BOSA/TOSA. A Free Space Optical Isolator Features: High Isolation Polarization Dependent Good Temperature Stability Package Size Diversity ROHS Compliant Free Space Optical Isolator Application: 10G LR,ER,ZR SFP+/XFP GPON OLT/10G PON 40G LR4 QXFP+/100G CLR4 Long Haul High Speed Module A Free Space Optical Isolator Specification: Center Wavelength:850--2000nm Isolation at 23a (Min): 38dB Insertion Loss at 23a (Max):0.20dB Clear Aperture:I 0.4--3.0mm Optical Power(Max):300mW Operating Temperature:-40---85a Storage Temperature:-40--85a Free Space Optical Isolator Ordering Information FSI--Wavelength--Single/Dual stage--Size--CA--Angle--Direction
Free Space Optical Isolator is widely used for 10G 25G 100G TOSA BOSA and optical module. SINY OPTIC-COM CO.,LTD. was founded in 2008, is leading optical isolator manufacturer in China. Wavelength: 1270nm-1310nm Clear Aperture:CA0.4-CA3.0mm
SINY OPTIC-COM CO.,LTD(stock code:838719) are well known manufacturer and supplier of LC SC Receptacle With Free Space Optical Isolators in Jiaozuo, Henan, China. Receptacle Isolator also called Free Space Isolator With Receptacle Receptacle With Isolator Features High Isolation Polarization Dependent Compact Size ROHS Compliant Receptacle With Isolator Application 10G LR/ER/ZR 6G/10G LTE 1.25G/2.5G TOSA Receptacle With Isolator Specifications Center Wavelength:1270nm,1290nm--1650nm Isolation at 23a (Min):38dB Insertion Loss at 23a (Max):0.3dB Clear Aperture:I 0.4--3.0mm Product Type:LC/SC Operating Temperature:-40---85a Storage Temperature:-40--85a
SINY OPTIC-COM CO.,LTD(stock code:838719) are known for manufacturing and supplying 1550nm Wavelength Free Space Optical Isolator For Transmitter inA Jiaozuo, Henan, China. Free Space Optical Isolator is widely used for optical transceiver/modules/BOSA/TOSA. A Free Space Optical Isolator Features: High Isolation Polarization Dependent Good Temperature Stability Package Size Diversity ROHS Compliant Free Space Optical Isolator Application: 10G LR,ER,ZR SFP+/XFP GPON OLT/10G PON 40G LR4 QXFP+/100G CLR4 Long Haul High Speed Module A Free Space Optical Isolator Specification: Center Wavelength:850--2000nm Isolation at 23a (Min): 38dB Insertion Loss at 23a (Max):0.20dB Clear Aperture:I 0.4--3.0mm Optical Power(Max):300mW Operating Temperature:-40---85a Storage Temperature:-40--85a Ordering Information FSI--Wavelength--Single/Dual stage--Size--CA--Angle--Direction
Applicable fiber:Single-core silica optical fiber Applicable fiber coating diameter: 0.25 0.9 2.0 3.03 2 rubber insulated fiber Applicable bare fiber diameter:125um Cleaved fiber length:5~16mm(0.25)10~16mm(0.9) Cleaving angle:0.7 Blade life:60,000 times Dimensions:107mm (W) 94mm (D) 50mm (H) Weight:315g
JX-550 specifications: Applicable fiber: Single-core silica optical fiber Applicable fiber coating layer diameter: 0.25 0.9 2.0 3.0 3 2 Applicable bare fiber diameter: 125m Cleaved fiber length: 5~16mm(0.25)10~16mm(0.9) Dimension: 105mm(W)70mm(D) 50mm(H) Weight: 285g Cleave angle: 0.7 Blade life: 60000 times
Fiber optic Faraday rotator mirror is a fiber optic device that can serve as both the reference mirror and the probing mirror. The device functions as a phase conjugate mirror by creating a phase delay of 90 degrees. This feature allows the mirror and the return path of the beam to automatically compensate for any induced birefringence the beam experiences during the first of leg of the travel. Therefore, the Faraday rotator mirror is an important part of the fiber optic Michelson Interferometer. The Faraday rotator mirror has been used widely to compensate for induced phase changes in many other waveguide applications. Faraday Rotator Mirrors are available pigtailed with 1 m of standard Corning SMF-28e+ single mode fiber. The fiber is mounted in a standard �?900 µm tight tube buffer with proper strain relief, and an optional 2.0 mm narrow key FC/PC or FC/APC connector is available. The Faraday Rotation Mirror is built with ALL-glass technique sealed process, it performs wide working wavelength range so that fit for various wavelength , it can rotate the input signal polarization state for 90°or 180° after reflect back ,widely used in sensor system.
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors. FC connectors can be supplied with wide key (2.14mm, N type) or narrow key (2.02mm, R key) width. Patchcords can be supplied in 250um bare fiber, 900um buffered fiber or 3mm cable. PMP features low insertion loss, high extinction ratio and high return loss. The slow or fast axis can be aligned to the connector key.
This is a cylindrical couplerdesign, even split, 900um loose tube fiber, connectorized, which is customized and hot sale in US market for years. Our Advantages: Faster Delivery Time: Normal items stock up enough 3-7 working days lead time First-class after sale service: on call 24 hours Temporary treatment in 72 hours Long-term measure feedback with in 7 days Assurance of reliability: Periodic reliability testing Continuous quality improvement.
Fiber optic attenuators are devices which reduce (attenuate) the strength of a fiber optic signal within a fiber optic network. Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements parameter SC, FC, ST, LC, MU, ST End-face APC/UPC/PC Mode Single mode & multi mode Sleeve Zirconia ceramic, phosphor bronze Insertion loss (dB) 0.2 Exchangeability (dB) 0.2 (connect randomly) Tensile strength (dB) 0.2 (0~100N) Vibration (dB) 0.2(5~50Hz, 1.5mm amplitude) Temp. Range (dB) 0.2(-40~80, 21 cycles)
Stainless steel Cable Gland(M,PG,G,NPT) Thread:M,G(PF) and NPT thread Brass with nickel plated for A.G.Fparts,UL approved Nylon PA66(Flammability UL 94V-2) for Epart, EPDM rubber for B.D parts(Accept to make super rubber:resist high temperature rubber,resist strong acid/alkali,ect) Protection degress:IP68 Working temperature:-40�ºC to100�ºC Features:The claws and seals of excellent design, can hold firemly and have a wider cable range. resistant to salt water,weak acid,alcohol,oil,grase and common solvency. Note:Special size and type,please contact us Price: Detail cost of different type.please contact us.
Stainless Steel Cable Glands Material: Body:SUS304/SUS316 ,Seal:Polyamide , Sealing:Modified rubber Protection degree: Within the clamping range,and the use of O sealing ring screw tight head ,its protection degree can reach IP68. Operating temperature: Static condition: -40â?? to 100â??, short-time120â??. Product Characteristics:special design of the clamp and seals, extremely easy installation, suit for wide range of cable, strong stretching resistance, waterproof, dust proof, resist to salt, acid, alcohol, grease and other solvent. Applications:Waterproof cable connector cable accessory products,joint can access equipment box,can also according to the electric equipment selection of thread access import and export for internal thread.
Stainless Steel Cable Glands Material: Body:SUS304/SUS316 ,Seal:Polyamide , Sealing:Modified rubber Protection degree: Within the clamping range,and the use of O sealing ring screw tight head ,its protection degree can reach IP68. Operating temperature: Static condition: -40â?? to 100â??, short-time120â??. Product Characteristics:special design of the clamp and seals, extremely easy installation, suit for wide range of cable, strong stretching resistance, waterproof, dust proof, resist to salt, acid, alcohol, grease and other solvent. Applications:Waterproof cable connector cable accessory products,joint can access equipment box,can also according to the electric equipment selection of thread access import and export for internal thread.
Optic fiber clamp for fiber cable, power cable, double type 6 holes Optic fiber clamp for fiber cable, power cable, double type 6 holes Model: TEL-OFC-003 Description: Combined cable clamp for fiber optical cable(FO) and power cable(DC) Telsto optic fiber clamps are used to fix power cable and fiber optical cable at the same time. Itâ??s available for power cable: 10-14mm, Optic fiber cable: 6.8mm. It can fix three fiber cables and three power cables at most. The C-shape bracket and pressing board are compact and terse. It is simple to fix the cables reliably. Features/Benefits l Customized products l High quality materials l Total fastening Optic fiber clamp for fiber cable, power cable, double type 6 holes
