Find Verified Wire Mesh Suppliers, Manufacturers and Wholesalers

90W Quick 203H digital display soldering station for Phone repair, microsoldering tool QUICK 203H lead free ESD soldering iron rework station. Intelligent QUICK 203H welding station for soldering work. QUICK 203H 90W ESD Soldering Station With Digital Display.

Features:
1. Sensor close to Tip giving accurate Temperature Control
2. Fast heating and rapid thermal recovery
3. Suitable for lead-free soldering
4. Auto sleeping function available, energy-efficient.
5. With password lock function
6. Digital temperature calibration, the operation is simple and convenient.

Specifications:
1. Temperature range:50-600
2. Power:90W
3. Size:245 235 130mm
4. Voltage: 220V/110V
5. Temperature stability: 1
6. Resistance for ground :

Upgrade YIHUA 995D+SMD Soldering Station, PHONEFIX 999D Soldering Station With Pluggable Hot Air Gun Soldering iron BGA Rework Station Phone Repair Welding Station

power supply voltage: 110V,220V-240V
power : 750W (max)
Heat gun part
Airflow Type: Brushless fan soft wind
Temperature Range: 100 C 480 C
Wind flow: 120 L/min (max)
Temperature Stability: Good
Display type: LCD
Handle length: 100cm
Soldering iron part
Temperature Range: 200 C 480 C
Temperature Stability: Good
Tip-to-ground voltage: less than 2mV
Tip resistance to ground: less than 2ohm
Display type: LCD
Handle length: 100cm

Application:
1. Suitable for a various kind of soldering or de-soldering (removals)purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.
(Especially mobile phone s cable).

2. Shrinking, paint drying, adhesive removal, thawing, warming, plastic welding.

YIHUA 995D+SMD Soldering Station With Pluggable Hot Air Gun Soldering iron BGA Rework Station Phone Repair Welding Station

Specification:
Machine
power supply voltage: 110V,220V-240V
power : 750W (max)

Heat gun part
Airflow Type: Brushless fan soft wind
Temperature Range: 100 C 480 C
Wind flow: 120 L/min (max)
Temperature Stability: Good
Display type: LCD
Handle length: 100cm

Soldering iron part
Temperature Range: 200 C 480 C
Temperature Stability: Good
Tip-to-ground voltage: less than 2mV
Tip resistance to ground: less than 2ohm
Display type: LCD
Handle length: 100cm

Application:
1. Suitable for a various kind of soldering or de-soldering (removals)purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.
(Especially mobile phone s cable).
2. Shrinking, paint drying, adhesive removal, thawing, warming, plastic welding.

700W CP-401 Heat Gun, 760W CP-601 2 in1 Soldering Station, 31L/min(MAX) 67dB 20-100 Wind level Soldering Station with Metal stand for Phone Motherboard Welding Repair.

CP-401 Specification:
Device parameters Equipment power:700W
Temperature range:100-450
Air volume range:20-100 Wind level
Air low volume:31L/min(MA)
Max Noise:67dB

CP-601 Specification:
Equipment power: 760W
Temperature range: 100~450 (212-842F)
Air volume range: 20~100 Wind level
Air flow volume: 31L/min(MAX)
Max Noise: 67dB
Soldering temperature range: 200-500 (392-932F)

Features :
1. Metal magnetic hibernation stand, place the stand automatically magnetic induction hibernation standby, pick up automatically and quickly return to temperature.
2. Fast heating hot air gun, temperature rises rapidly. good tinning effect, long life.
3. Large screen LCD display, thin and light, low power consumption.
4. Independent control of temperature and air volume.
5. Digital temperature / air volume calibration, more intuitive and convenient.
6. High temperature resistant flame retardant environmental protection material, artificial design.

Infrared/Laser Cut-to-Length Cutting System



Overview

The all-digital non-contact infrared automatic cut-to-length cutting system developed is the first digital measurement, digital transmission, digital positioning and digital control technology in China. It is suitable for the primary and secondary cutting of continuously cast product of square billets, rectangular billets, slabs, round billets and shaped billets. It can automatically cut 1-48 billets to length at the same time, and display the casting speed and running status of each billet. The system has high measurement and control accuracy and strong anti-interference ability, which improves the output and quality of the cast products and reduces the labor intensity of the operator. The whole system has the advantages of low investment, simple installation, debugging and operation, and basically maintenance free. No need to change the original production equipment, a major breakthrough in the automatic cut-to-length cutting method, and it is also an important part of the continuous casting process, which has been highly praised by experts and manufacturers. Digital infrared cutting to length can also provide high-definition solutions, so that the measurement error is 1mm, and the system can support 12 strands high-definition CCD image measurement.



The features of the system

1. The system adopts advanced digital image processing technology (non-contact type) to identify the length of hot billet online, automatically controls the flame cutting machine to cut the hot billet to a certain length, detects and displays the running status and casting speed, and collects the image information of the moving billet from a long distance through an infrared camera.

2. The computer processes the image information by pattern recognition program, forms the operation information and converts it into the electrical signal of the specified format, so that the hot billet can be cut by the actuator. The system can cut the 1-48 billets to length at the same time with an infrared camera.

3. A schematic diagram of the overall layout and working principle of the system is shown in Figure 1.




The technical parameters

1. Numbers of caster stands: maximum 12 strands

2. Measurement accuracy: 1mm

3. Cutting method: flame cutting

4. Fixed length range: 6-12m

5. Matching casting speed: 1.5 4.2m/s

6. Fixed length range: 6-12m

7. Temperature range of cast products:

MAC-G320 Automatic Mold Flux Feeding Machine



Overview

MAC-G320 automatic mold flux feeding system is a new generation product of automatic adding mold flux, which is independently developed According to different steel grades, casting speed, vibration and other process parameters, then the system can analyze and calculate the accurate mold flux addition amount through intelligent software. Then the system sends out signals to control the mold flux addition process and mold flux addition amount, and designs appropriate nozzles and propellers according to the fluidity of molten steel in the mold and the ductility of mold flux. After the system setting is completed, there is no manual intervention is required. It completely replaces the whole process of manual addition of mold flux, and realizes the automation of mold flux addition.



The features of the system

1. The system automatically controls the amount, process and time of adding mold flux according to the process requirements of automatic mold flux addition, so as to maintain the physical state of the mold flux and prevent it from being broken.

2. The user can match different parameters according to actual needs, so as to change the length of the mold flux feeding time and the amount of mold flux, which can suit for the use of different sections and different casting speeds.

3. The casting speed signal is used and the amount of adding mold flux can be automatically adjusted according to the casting speed. The mold flux can be added timely and evenly, which can improve the quality of the billet and reduce labor intensity.

4. The time is controlled by PLC, no manual intervention is required. The adjustment is very convenient. It has manual, automatic, local and remote control modes.

5. The system has reliable performance and simple structure, and can be adapted to powder and granular mold flux.

6. It has a special anti-blocking nozzle and backflushing design to overcome the phenomenon of pipeline blockage.



The technical parameter

Mold width: 500-2000mm

Mold thickness: 100-500mm

Type: screw conveying type mold flux feeding machine

Heating method: stirring electric heating

Arrangement location: on the pouring platform (with its own wheels to move)

Adding capacity: 0.5 7.5L/min, continuously adjustable feeding tube

Molding flux storage tank 125 L, with material level detection and alarm

Control mode: local/remote control, automatic /manual mode

Molding flux type: granular flux or powder flux

flux adding method: spiral swing adding flux

Casting speed interlock: yes

Mould size setting: yes

Signal transmission: DP/Industrial Ethernet

The company specializes in the production and sales of laser welding machines, laser marking machines, laser cleaning machines, CO2 laser cutting machines, and automatic welding machines. Laser light source, power supply, water tank, fan, all spare parts are sold

Fiber laser welding machine is an advanced welding technology which is a perfect replacement of traditional electric welding, MIG and CO2 welding.

Laser Cleaning process is to melt the connecting area by a very high-energy and dense beam with a large amount of heat. The single module optical fiber laser source provides consistent and stable power and high quality of laser beam. The laser power range can be adjusted according to actual production needs. This solution guarantees unparalleled application flexibility and high reliability.

Parameters
Laser 1000W 1500W 2000W 3000W
Cleaning head TOPtek PRO WOBBLE
Wire feeder TOPtek EasyWIRE
Control system TOPtek PRO Cleaning

handheld laser welding solutions. Adhering to the deep professional ability, numerical control system, high-speed transmission system and other core technologies, we are committed to providing high-quality welding solutions to customers in various industries around the world.
After decades of development, the company has become a modern high-tech enterprise integrating research and development, sales, production and service.

Parameters
Laser output power: 20W/30W/50W Laser wavelength: 1064N
Pulse frequency: 20KHz-100KHz Standard engraving range: 100mmX100mm
Minimum line width: 0.001M Repeat accuracy: 0.001mm
Total power: 500W Engraving depth: 0.2mm
Minimum characters: 0.15mm Engraving line speed: 7000mm/s
Optical system size: 500mm Control System: PZDZ
Cooling Systems: air cooling

Fiber laser welding machine is an advanced welding technology which is a perfect replacement of traditional electric welding, MIG and CO2 welding.

Laser welding process is to melt the connecting area by a very high-energy and dense beam with a large amount of heat. The single module optical fiber laser source provides consistent and stable power and high quality of laser beam. The laser power range can be adjusted according to actual production needs. This solution guarantees unparalleled application flexibility and high reliability.

ROLLED OVER TRADITIONAL WELDING IN ALL ASPECTS
1.Faster speed: the welding or cleaning efficiency is 5-10 times higher than traditional welding.
2.Easy operation:No need experienced operator, any green hands can operate it within 30 minutes training.
3.Cost-saving: 80% cost-saving than traditional electric welding, MIG welding, argon arc welding. Less operator, less consumption(gas and consumables etc.) and less working time. For example,if the workload equals 1 experienced operators working in 10 hours, but with the laser welding or cleaning machines, only 1 ordinary being can fix it in 3 hours.
4.Welding seam is almost invisible, and smooth welding surface.
5.Very small deformation on Workpiece.
6.Operation safer.
7.Environmental-friendly welding.

Technical Parameters
Name Portable laser welding machine Welding thickness Carbon steel,Stainless steel (0.5-8mm)
Laser Power 1000W/1500W/2000W/3000W Welding seam 0.5mm
laser wavelength 1064 NM Voltage AV 220V/380V
Laser cable length Standard:8-10� meter, Max:15meters Laser lifetime 100,000 hours
Working mode Continuous Working humidity range

Wire diameter:1.0 4.0
Max.winding speed:150rpm
Max.final coil.O.D: 130 650
Wire spacing:Proportional linkage
Min.final coil.I.D: 60
Supply voltage:AC 220V 50Hz
Max.finalcoil height:150
Mechanical dimensions:900 600 1350
Controller storage capacity Programs:29 set
Weight:240kg

Customized Automotive Wiring Harnes

Handheld laser welding machine is mainly used for inside, outside right Angle, flat welding, seam welding.
The handheld Laser welder is a new, more flexible welding process that can weld small, medium and large work pieces.