High quality 3 in 1 winter jackets by Doven Garments Shell: Nylon waterproof fabric, red color Lining: polar fleece, dark grey-removable Inner lining: mesh, dark grey Hood with YKK zipper,adjustable stoppers and velcro, hood removable. Fleece corner on zipper top Fleece collar inside Raglan armhole with white piping Shoulder, sleeve and waist with dark grey panels Ykk long zippers, pocket zippers Placket with velcro patches Velcro cuff Adjustable stoppers on hem
Shell: Nylon waterproof fabric, red color Lining: polar fleece, dark grey-removable Inner lining: mesh, dark grey Hood with YKK zipper,adjustable stoppers and velcro, hood removable. Fleece corner on zipper top Fleece collar inside Raglan armhole with white piping Shoulder, sleeve and waist with dark grey panels Ykk long zippers, pocket zippers Placket with velcro patches Velcro cuff Adjustable stoppers on hem
Fashion and high quality.
Suit According to customer
900 series din standard safety valve are mainly applied to the industries such as petroleum & natural gas, chemistry, electric, metallurgy & burning gas. Din safety valve, pressure safety valve, safety relief valve. 900 din spring loaded pressure safety valve Din standard safety valve features: Safety valves were first used on steam boilers during the industrial revolution. Early boilers without them were prone to accidental explosion. Safety valves also evolved to protect equipment such as pressure vessel (fired or not) and heat exchangers. Safety valve term should be limited to compressible fluid application (gas, vapor, steam). The two general types of protection encountered in industry are thermal protection and flow protection. For liquid-packed vessels, thermal relief valves are generally characterized by the relatively small size of the safety valve necessary to provide protection from excess pressure caused by thermal expansion. In this case a small valve is adequate because most liquids are nearly incompressible, and so a relatively small amount of fluid discharged through the relief valve will produce a substantial reduction in pressure. 3w.Chinavalve1.Come Plywood case package
Pressure rating : 1.6- 2.5mpa Specification : dn15-25 Material : cast steel Standard flanges : din ansi jis jb79. Structural characteristic 1.The valve adopts two kinds of sealing, e, g, balance double valve seat and single valve seat with reliable closedown and long life. 2.There's always condensate water available in front of the valve with reliable water sealing and non-leakage of steam. 3.No noise before operation in favor of environmental protection. 4.At the beginning of ventilation, all the valves start and lowtemperature condensate water and air are rapidly expelled to greatly shorten the start time for equipment. 5.Internal component is made of stainless steel, corrosion and cavitation erosion proof.
Detailed product description Butterfly valve High performace butterfly valve(triple offset butterfly valve) Manufacture standard: api609 Inspection and test: api598 Specifications: 1) pressure class: 150 - 300lbs 2) size: 2- 72" 3) temperature: -29ípc - 425ípc (wcb), -196ípc - 600ípc (ss) ía570ípc Alloy steel 4) suitable medium: water, oil, gas, vapor, steam etc. 5) body and disc material: wcb, cf3, cf8, cf3m, cf8m etc. 6) stem material: 410(1cr13), 420(2cr13), 304, 316, 304l, 316l, 38crmoala, 25cr1mov 7) packing: graphite 8) operating type: worm gear, pneumatic actuator Export standard case
This product is used on face-shield for protecting eyes from strong light such as welding shade from 3 to 14. 400/CTN,28kgs 108*50mm
Specifications Full port or Regular port. Nominal Pressure: PN 16 to PN 64 / ANSI Class 150 to Class 300 Through way floating ball valve. Connection:Butt Welding Operate Actuator: lever, gear (Vertical / Horizontal); pneumatic / electrical Body:ST37.8, A105, etc. Trim Material:Generally 13Cr,other materials upon clients' needs. Materials Available Body : ST37.8 / P235GH /A105 / LF2 / F304 / F316 Ball : SS304 / A105+ENP / LF2+ENP Stem : 13Cr Seat : PTFE+C / PEEK
Nominal Diameters:DN10~DN1000(3/8'-40'). Nominal Pressure:PN1.6~42.0Mpa( 150lb ~ 2500lb ). Materials: A105, LF2, F5, F11, F22, F304, F 304L , F316, F 316L , WCB, WC6, WC9, CF 8M , CF3, CF 3M etc.
Nominal Diameters:DN10~DN1000(3/8'-40'). Nominal Pressure:PN1.6~42.0Mpa( 150lb ~ 2500lb ). Materials: A105, LF2, F5, F11, F22, F304, F 304L , F316, F 316L , WCB, WC6, WC9, CF 8M , CF3, CF 3M etc.
Paint & coating.
Check Valve Industrial Check Valve for Sale Trust BST Valves to provide you with high quality swing check valves and a variety of different check valves for all your backflow prevention needs. What is a check valve? Check valves are used to ensure that gases and liquids flow in only one direction. They essentially prevent the process flow from flowing back, thus forcing the valve to close. Correct flow pressure forces the check valve open, while reverse flow causes the valve to close. Flow check valves open at the designed minimum flow or cracking pressure so that the valve can begin operation. Check valves protect the system from pressure fluctuations that can cause damage to pumps and pipes and help operate efficiently. Check valves are required to stop backflow and protect rotating equipment and machinery from sudden backflow surges that may occur. BST Valves is a manufacturer specializing in check valves, offering industrial check valves in a variety of configurations and materials, including Cast Steel Check Valves and Stainless Steel Check Valves. Our check valves are industry proven for use in a wide range of applications from oil and gas to pulp and paper.
Band Heater series Double-deck stainless steel heating circle HSB1-B2
Coil heater series WE ARE THE MANUFACTURE OF COIL HEATERS. It is a company that specializes in manufacturing all kinds of these products, has high-tech content. SPECIFICATION: 1) Ni-Cr alloyed metal as heating element. 2) Round, square and rectangular cross sections. 3) Dimensions (cross sections in mm) Square: 2x2mm,3x3mm, 3.5x3.5mm, 4x4mm,5x5mm,6x6mm,7x7mm,8x8mm Round:1.5mm,1.8mm, 2.5mm,3mm, 4mm, 5mm,6mm,7mm,8mm Rectangular: 4x2mm,4.2x2.2mm 4) Rated Voltage: 220V, 230V, 240V,380V,110V,127V,24V,36V,12V 5) Rated Power:30w (min) 6) Inner Diameter:6mm(min) 7) Length:20mm(min) 8) Type J and K thermocouples available 9) Luster: Polished or Sand-blasted
Nominal Diameters:DN10~DN1000(3/8'-40'). Nominal Pressure:PN1.6~42.0Mpa( 150lb ~ 2500lb ). Materials: A105, LF2, F5, F11, F22, F304, F 304L , F316, F 316L , WCB, WC6, WC9, CF 8M , CF3, CF 3M etc.
thermosetting powder coating.
Printing, painting, coating, coloring plastic.
Pneumatic valve is a valve driven by compressed air. When purchasing pneumatic valves, only the specification, type and working pressure are specified to meet the purchase requirements, which can be used to control the flow of air, water, steam, various corrosive media, mud, oil, liquid metal, radioactive media and other types of fluids. Sudhanafluid pneumatic valve series: butterfly valve The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the butterfly valve body, the disc-shaped butterfly plate rotates around the axis and the rotation angle is between 0 �° and 90 �°. When it rotates to 90 �°, the valve plate is fully open. The butterfly valve is simple in structure, small in size, light in weight and only composed of a few parts. It can be opened and closed quickly by rotating 90 �°, and the operation is simple. At the same time, the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. The butterfly valve has two types of seal: elastic seal and metal seal. Elastic sealing valve, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate. Valves with metal seals generally have a longer service life than those with elastic seals, but it is difficult to achieve complete sealing. Metal seal can adapt to higher working temperature, while elastic seal has the defect of being limited by temperature. If the butterfly valve is required to be used as flow control, the main thing is to select the correct size and type of valve. The structural principle of butterfly valve is particularly suitable for making large-diameter valves. Butterfly valves are not only widely used in oil, gas, chemical, water treatment and other general industries, but also used in cooling water systems of thermal power plants. The commonly used butterfly valves include wafer butterfly valve and flange butterfly valve. Wafer butterfly valve is to connect the valve between two pipe flanges with stud bolts. Flange butterfly valve is to connect the flanges on both ends of the valve to the pipe flange with bolts.
Zhejiang Yangtze River Pump Co.,Ltd specializes in manufacturing pumps for more than 20 years and obtained many quality certificates,such as ISO9001-2000,CE etc. We produce centrifugal pumps,magnetic driven pumps,inline centrifugal pump,self priming pumps,submersible pumps, single-screw pumps,diaphragm pumps etc.
