1. Material: tinned copper foil 2. Single foil thickness: 0.05mm, 0.10mm, 0.20mm, ... 3. Cross section: 50-4000 SQMM 4. Purpose: flexible electrical or conductive connection 5. RoHS compliant 6. Customization available for special dimension, shapes and structure.
Stripe steel magnetic float magnetic float Size :38*26*9.5 material :316L pressure :1MPA Temperature :-100??-200S.G :0.5 Weight :10.5 Magnetic flux :40 This type we have stock for all year , so when you need it , we can send to you within two days after get the payment This product is laser welding, manual polishing carefully waxing Helium test quality before delivery Unqualified products immediately come up, re-processing
Trampoline park, indoor playground.
Stainless steel pipe fitting, stainlesss steel elbow..
Timothy holding co., ltd. Locates in wenzhou city , zhejiang province of china. We specialize in designing and producing all kinds of sockets(electrical outlet / power strip/ plug socket/electrical socket, plug seat, plug base, plug socket/socket outlet).
Stainless steel wire rod, stainless steel round bar, stainless steel pipe.
This is Jason from Longsun Group. We are a leading manufacturer in China, and manufacture electrical contact materials for 30 years. Now, we supply electrical rivet contacts, silver alloy contacts, silver tunsten contacts, contact points, bimetal clad strips. Our product are widely used in Low and Middle Voltage product (switch, relays, circuit breaker and contactor), and serving Schneider, ABB, Siemens and so on. If there any need, please feel free to contact us.
Color: brushed or a polished finish Material: s.S 304 Draining rate: 0.7l/s Outlet: 50 mm Load class: k3 (300 kg) Unit price: usd17.8, fob ningbo by sea Payment: t/t or l/c Shipment: 30 days after receiving the advance payment. Package: 1pcs in white or brown paper box/ctn Sample charge: free Sample lead time: 3-5 days Will inform you when you need it
Color: brushed or a polished finish Material: s.S 304 Available size: 85*800/900/1000/1200/1500 Draining rate: 0.7l/s Outlet: 50 mm Load class: k3 (300 kg) Unit price: usd27.3, fob ningbo by sea Payment: t/t or l/c Shipment: 30 days after receiving the advance payment. Package: 1pcs in white or brown paper box/ctn Sample charge: free Sample lead time: 3-5 days Will inform you when you need it
The enterprise technical force is rich, well-equipped, the introduction of high-quality personnel, and strengthen internal management, actively participate in market competition. A long time, the product of its reasonable structure, excellent performance, superior technology, competitive prices, our products sell well both at home and abroad. 100íß100ú¼125g, 50mm
Hand dryer ,high speed hand dryer ,jet hand dryer , floor scrubber.
Structure characteristics: 1.The valve applies the principle that bimetal strip will expand when being heated and contracted when cooled to realize the start/closedown effect of drainage and air resistant. 2.Small type light weight design, convenient installation in any angle. 3.At the beginning period of operation, the air and condensate water can be rapidly discharged without airlock. 4.Sensitive induction for continuous discharge, without noise, and strong corrosive resistance. main application: Bimetal drain valve can be used in different industrial steam heating systems including power station, petroleum, chemical industry, paper making, light textile, and metallurgy ,etc. and can automatically discharge the condensate water out of the steam heating system to ensure the system can work efficiently under the condition of saving energy.
Foam mats, play mats, puzzle mats, foam floor mats, exercise mats, yoga mats.
China supplier wholesale dyed muti-colored yarn kitchen cleaning microfiber thread strips in roll kg price Product Details: Material: 100% Polyester Microfiber Yarn Color Options: White, Yellow, Pink, Blue, Orange, Red, Green, Purple, or Customized Yarn Count: 300D/192F,300D/288F,300D/342F,300D/576F ......or Customized Usage: Ideal for Mop Making, Knitting, Sewing, and Weaving Yarn Type: DTY, Filament, Texturized Technics: Woven or Braided Packing: PP Bag Twist: High Twist Evenness: Good Strength: Strong Features: Anti-Bacterial, Sustainable, High Tenacity, Moisture-Absorbent Shipping & Payment: Departure Port: Ningbo/Shanghai, China Payment Terms: T/T; LC Delivery Time: 10 - 15 Days after order confirmation Brand Name: Keshu Samples: 1-3kg Free (excluding freight) Factory Visit: Welcome to visit our factory in Zhejiang, China Specifications and Colors are Customizable! We specialize in producing recycled cotton yarn, microfiber yarn, and mops.
ESecond, the machine main components The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control. Agencies main configuration and specifications (A) unwinding institutions The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled. Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum. Unwinding specifications: maximum width of700mm, phi diameter 1000mm Paper tube clamping method: air shaft clamping Specifications: 3in 1 root of the air shaft 1 piece A pneumatic gun 1 piece Tension control: closed-loop tension control. The output control: 200N.M 1 piece magnetic brakes 1 piece Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution. Specifications: photoelectric eye 1 piece Two linear bearings4 piece A corrective institutions 1 piece The photoelectric eye fine-tuning 1 sets (B) cutting machine configuration The agency uses carbide precision disc disc knife (slitting relatively thick aluminum foil, paper and other materials) or (and) straight knife cutting (slitting general plastic film), neat incision, long life, cutting up and down knife shaft width adjustment processing, between the upper and lower blade shaft gear speed matching. Turning the handwheel implementation under the knife, the knife continues to rotate automatically rely. Tool axis: under the knife shaft each one 2 locking device: a fast by knife device, able to lock on the knife shaft, to avoid slitting knife from the up and down or move due to quality problems. Specifications: a rocker arm A locking shaft With gear A worm gear 3. Row waste: by blowing high pressure air feed tube diversion, the scrap material to exclude Specifications: 1 fan
ESecond, the machine main components The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control. Agencies main configuration and specifications (A) unwinding institutions The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled. Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum. Unwinding specifications: maximum width of700mm, phi diameter 1000mm Paper tube clamping method: air shaft clamping Specifications: 3in 1 root of the air shaft 1 piece A pneumatic gun 1 piece Tension control: closed-loop tension control. The output control: 200N.M 1 piece magnetic brakes 1 piece Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution. Specifications: photoelectric eye 1 piece Two linear bearings4 piece A corrective institutions 1 piece The photoelectric eye fine-tuning 1 sets (b) the rolling bodies The agency uses the left-right axis biaxial winding winding with pressure arm balance internal and external pressure. The transmission uses two independent magnetic particle motor drive uniaxial tension adjustable. Winding Specifications: width up to 700mm, diameter 600mmï¼?or diameter 420mmï¼? Paper tube clamping means: air shaft clamp (according to customer material specifications) Specifications: 3in 2 root of the air shaft Rewinding pressure: differential pressure pneumatic compression, the pressure can be adjusted by pneumatic pressure regulator Specifications: Pressure arm 2 Cylinder 2 Tension control: magnetic motor constant torque output Specifications: motor controller Winding execution: magnetic motor 2 (specifications 50N.M) Single head swing arm unloadingï¼?Or general dischargeï¼? (D) transmission mechanism The inverter is used to control the main motor operation, convenient lifting speed, the speed adjustment the excessive soft, smooth. Drive mode: General inverter control of AC motor drive Specification: 7.5KW exchange motor Supporting inverters (domestic well-known brand, quality assurance) (E) Major appliances: Centrally electric control cabinet box, elegant, and easy to operate. Operation of a cabinet Comptroller display a realistic real-time linear velocity, Hutchison meters automatic stop function (with deceleration stop function, Hutchison Mickey the error) Optical correction controller 1 Button, contactors, air switches Users themselves: 1.50 Hz, 380V three-phase five-wire power supply 2 foundation treatment Mounting equipment and commissioning of the raw materials, auxiliary quipment effective width 700MM, mechanical speed 150M/min
ESecond, the machine main components The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control. Agencies main configuration and specifications (A) unwinding institutions The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled. Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum. Unwinding specifications: maximum width of700mm, phi diameter 1000mm Paper tube clamping method: air shaft clamping Specifications: 3in 1 root of the air shaft 1 piece A pneumatic gun 1 piece Tension control: closed-loop tension control. The output control: 200N.M 1 piece magnetic brakes 1 piece Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution. Specifications: photoelectric eye 1 piece Two linear bearings4 piece A corrective institutions 1 piece The photoelectric eye fine-tuning 1 sets (B) cutting machine configuration M, mechanical speed 150M/min
e machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control. Agencies main configuration and specifications (A) unwinding institutions The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled. Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum. Unwinding specifications: maximum width of700mm, phi diameter 1000mm Paper tube clamping method: air shaft clamping Specifications: 3in 1 root of the air shaft 1 piece A pneumatic gun 1 piece Tension control: closed-loop tension control. The output control: 200N.M 1 piece magnetic brakes 1 piece Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution. Specifications: photoelectric eye 1 piece Two linear bearings4 piece A corrective institutions 1 piece The photoelectric eye fine-tuning 1 sets (B) cutting machine configuration The agency uses carbide precision disc disc knife (slitting relatively thick aluminum foil, paper and other materials) or (and) straight knife cutting (slitting general plastic film), neat incision, long life, cutting up and down knife shaft width adjustment processing, between the upper and lower blade shaft gear speed matching. Turning the handwheel implementation under the knife, the knife continues to rotate automatically rely. Tool axis: under the knife shaft each one 2 locking device: a fast by knife device, able to lock on the knife shaft, to avoid slitting knife from the up and down or move due to quality problems. Specifications: a rocker arm A locking shaft With gear A worm gear 3. Row waste: by blowing high pressure air feed tube diversion, the scrap material to exclude Specifications: 1 fan A duct 4 main wall: steel wall panels, effective shock absorption, enabling machine high-speed and stable operation. Specifications: 30MM ange motor
Timothy holding co., ltd. Locates in wenzhou city , zhejiang province of china. We specialize in designing and producing all kinds of sockets(electrical outlet / power strip/ plug socket/electrical socket, plug seat, plug base, plug socket/socket outlet).
Timothy holding co., ltd. Locates in wenzhou city , zhejiang province of china. We specialize in designing and producing all kinds of sockets(electrical outlet / power strip/ plug socket/electrical socket, plug seat, plug base, plug socket/socket outlet).
