Find Verified Clothing Accessories Suppliers, Manufacturers and Wholesalers

Place of Origin: Zhejiang, China (Mainland)
Brand Name: or Customized
Belt Material: Cow Hide
Buckle Material: Alloy
Width:3.4 cm or customized
Length:110-130cm
Product Name: Custom Belt Design Men
Size: Belt Men size Can Be Customized
OEM & ODM: Yes, Belt Men Can Make Brand Custom
Belt Logo: Acceptable Customer's Logo, Belt Men
Gender: Belt Men
Design: Client's Design or Our Company's Design
Certificates: BSCI, SGS
Main products: Specialized in Reversible Belt, Pu Belts etc
Buckle Type:Reversible Belt Buckle
Style:Custom Belt Design
Color:Black, Brown or customized

Radiation Measurement Instruments

Radiation measurement instruments provide accurate radiation measurements in a variety of applications. From performing handheld gamma radiation measurements to measuring alpha and beta, radiation detectors make it easy to perform the measurements that are critical to any radiation safety program. These radiation monitoring instruments provide flexible options for most basic radiation detection scenarios.

1. What are radiation measuring instruments?
Sources of ionizing radiation have important and indispensable uses in various industries to derive maximum benefit from their applications. To ensure radiation safety for radiation professionals, patients and the public; good radiation safety practices should be followed. The most important practice is to use radiation measuring instruments to measure the radiation in and around the source.

2. What are the types of radiation measuring instruments?
The main types of radiation measuring instruments are: Surveyor, Dose Alarm Instrument, Radiation Monitoring System, Contamination Detector.

3. What are the important factors to be considered in the maintenance of radiation measuring instruments?
Instruments should be kept in the best condition.

Periodic calibration should be carried out as recommended by the authorities.

If the instrument is repaired (or) the detector is replaced, the radiation measuring instrument must be recalibrated.

4. Where can these radiation measuring instruments be calibrated?
Calibration cannot be done in any laboratory. The laboratory must be accredited by AERB (Atomic Energy Regulatory Board of India).

AERB has further made it stringent that the laboratory must be accredited by an auditing body i.e. NABL.

Such laboratories are required to calibrate the radiation measuring instruments at regular intervals.

Highly transparent, allowing most light to travel through our products, transmittance reaches 92%. Crystal clear, versatility, excellent physical properties, impact resistance, high transmittance, aging resistance, good weather resistance, heat resistance!

1.Specification: main 1220*2440, 1220*1830 , 2050*3050. Other size is available.
2.Thickness: 1.8 mm - 50 mm
3.High quality and good price
4.Application: signage, logo, medical viewing machines, stationery gifts, headlight protectors

Quick details

Properties:Massager
Place of origin:Zhejiang, china (mainland)
Brand name:Yanning or oem
Model number:Yn-1268
Type:Massage belt
Application:Body
Certificate:Iso9001:2008 ce
Warranty:One year
Size:42*11.5*23cm
Power type:24w
Color:White
Net weight:2.82kg
Name:Hot sell body massager and slimming belt







Product description

1. 4 massage head with built- in heating and kneading
2. Massage head can do directed clockwise or counter-clockwise
3. Built-in over-heating prevention mechanism
4. Portable and easy to operate
6.Automatic timing (15min shut off).
7. Used for car and home

Valve quantities of filling: 8 heads
Heads of capping: 3 head
Heads of washing: 8 heads
Capacity: 500ml 3000b/h
1000ml 1500b/h
1500ml 1000b/h




Dimensions: LxWxH 2000x1500x2250mm
Weight of equipments 1800Kg

TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron

1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly.

2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape.

3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine.

4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position.
Main Technical
Model TC-650A
Paper grams 200-1000g/m2
Work capacity 5000 pcs/h
Blank length 150-560mm
(5.91-22.04inch)
Blank width 120-500mm
(4.72-19.68inch)
Film length 30-300mm
(1.18-11.81inch)
Film width 40-300mm
(1.57-11.81inch)
Film thickness 0.08-0.30
Main Motor power 7kw
Weight 3000kg
Machine size(LxWxH) 6500x1200x1600 mm


Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.

Fire retardant polypropylene sheet is a halogen-free flame retardant polypropylene sheet. It is non - toxic and harmless to human body, insoluble in water, do not burn, no smell.And there are excellent waterproof, moisture-proof, anti-corrosion, anti-ultraviolet aging, acid and alkali resistance, salt fog resistance and other properties, materials without harmful substances.

Our fire retardant polypropylene sheet can be used for electronic appliances, power supply, etc. Any size can be customized

Yellow polypropylene sheet ï¼?rollï¼?for insect sticky trap is a new high-tech insecticidal product that is developed quickly, easily and greenly by applying the characteristics of modern biochemistry and photophysics. It mainly uses the characteristics of agricultural pests to have green, yellow, phototaxis and taste characteristics to induce and kill. It has a strong killing effect on refractory pests in greenhouses and fields.Yellow polypropylene sheet ï¼?rollï¼?for insect sticky trap is environmentally friendly, non-polluting and pollution-free. It also indirectly prevents and controls the prevalence and occurrence of insect borne plant virus diseases while controlling pests. It is an essential product for pollution-free agricultural production in facilities, bringing you green, A healthy, pollution-free production environment.

Flame retardant electrical insulating materials have high temperature resistance, high voltage resistance, fire resistance, anti-static, bending resistance, corrosion resistance, anti-pollution and other properties, widely used in power/adapter insulation, battery insulation, electrical insulation, electrical insulation, EMI insulation, inverter insulation, converter insulation, power bus insulation.They are available as sheets and rolls or and can be fabricated into a wide range of shapes to meet the flammability and dielectric needs of a variety of applications.

HOLO SC 130 New Ply Separator
Ply Separator
Ecnomic Ply Separator
130 Ply Separator
HOLO SC 130 ply seperator is used for separator between each plies of a conveyor belt.
This cutting action is applied to prepare a fiver over finger splicing belt with 2 or 3 separations within one belt.
It is also possible allow user to creat films from belt for splicing process .
Product Description of Ply Separator
Split deepth up to 130mm .
With only one handle allow precise splitting thickness up to 10mm .
New Hard alloy steel knife,better performance on thin Pu belt .
With scale, high precision separation and easy work, high efficiency.
Foot pedal start / stop with cover, work more safe.
Features and Benefits
Easy deepth adjustment
Capable of splitting belts up to 10 mm thick.
Better performance on hard belt.
Safe and Convenient.
Accessories and Options
Optional stand ,allowing to be portable within workshop.
As a ply separator manufacturer, Honglong provides ecnomic ply separator such as 130 ply separator, 750 ply separator, belt splitting machine.

HOLO PA Air Cooled Press Machine
Air Cooled Press Machine
splicing press
belt vulcanizer
HOLO PA serious air cooled press is an all-in-one solution for splicing thermoplastic conveyor belts (e.g. PVC PU PVK).
This splicing press vulcanizing machine No external control box, air pump, or water cooling tank are required.
The HOLO presses are provided with electric heating and built in air cooling. The splice process runs fully automated.
Product Description of belt vulcanizer
Splice pressure is applied by an internal compressor,
max. 2 bar
Heats up to a splice temperature of max. 200°C
Keeps it at the splice temperature (adjustable dwell time)
Cools down to the cooling temperature
(safe temperature to take the belt out)
For thicker belts a preheat temperature and preheat dwell time can be applied
The bottom heating can be set lower or higher than the top heating
The splice plate surface is 130 mm wide
Size PA300 PA600 PA900 PA1200 PA1500 PA1500H PA1800H PA2100H are available for now.
Features and Benefits:
Splice times as short as 8-12 minutes.
All-in-one unit with no external components .
Two dwell levels of temperature for thick belt .
Light and easy to handle.
Accessories and options
Flight Case included for storage and easy tranport to on-site work.
Press stand and extension cable is option for efficiency in the fabrication workshop.
As a hot press splicing machine manufacturer, Honglong provides air cooled press machine, water cooled press machine, hot press machine, splicing press, belt joint machine, belt vulcanizer.

Product description
TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron

1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly.

2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape.

3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine.

4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position.
Main Technical
Model TC-650A
Paper grams 200-1000g/m2
Work capacity 5000 pcs/h
Blank length 150-560mm
(5.91-22.04inch)
Blank width 120-500mm
(4.72-19.68inch)
Film length 30-300mm
(1.18-11.81inch)
Film width 40-300mm
(1.57-11.81inch)
Film thickness 0.08-0.30
Main Motor power 7kw
Weight 3000kg
Machine size(LxWxH) 6500x1200x1600 mm


Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.

Product description
TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron

1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly.

2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape.

3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine.

4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position.
Main Technical
Model TC-650A
Paper grams 200-1000g/m2
Work capacity 5000 pcs/h
Blank length 150-560mm
(5.91-22.04inch)
Blank width 120-500mm
(4.72-19.68inch)
Film length 30-300mm
(1.18-11.81inch)
Film width 40-300mm
(1.57-11.81inch)
Film thickness 0.08-0.30
Main Motor power 7kw
Weight 3000kg
Machine size(LxWxH) 6500x1200x1600 mm


Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.

The SF6 insulated switchgear is suitable for middle voltage power distribution system with a rated voltage of 12kV. It could be used as RMUs in a power supply network, fault isolating switches and sectionalizing switches. If equipped with distribution automation devices (FTU/DTU) and communication devices, the SF6 insulated switchgear could communicate with the control center, measure the cable voltage, current, etc, and monitor the working status of switches.
BKRM6- 40.5 series of ring main unit is SF6 gas- insulated metal common tank enclosed switchgear, consisting of load break switch unit, load break switch fuse combination electrical unit, vacuum circuit breaker unit, and the incoming line unit of bus. It adopts a range of advanced technologies and materials, with excellent electrical and mechanical properties, less affected by environment and climate, in small size, easy to install easy to operate, with no need of maintenance, and can be flexibly combined. Its clear and intuitive design ensures simple and direct operation, the feeder's connection capacity is large, suitable for a variety of wiring systems.
Besides,we can replace the SF6 gas with nitrogen(N2 gas) that it will become a environment protection green gas insulated switchgear. The green gas insulated switchgear safer and environmentally friendly more than SF6 GIS and it will replacing SF6 GIS in the future.

Wide application
Single screw pump is used in all fields widely to feed kinds of medium, running at a constant pressure continously without pulse and damage when feeding medium , and change the gauging aim through adjusting rotation
Feeding medium
This product is applicable for feeding medium which has the followig properties
High solid cotent(diameter of the bigest particle is 50mm)or no solid content
Medium with all viscosites(1mpas~3000000mpas)
Medium that is easy to be generated and swelled
Shearing sensitive medium
Medium with erosion
Medium with/without self lubrication
Erosive medium(ph-0~14)
Adhesive medium
Toxicity hazard medium

Zhejiang YOUJI Machinery Technology Co.,Ltd.

valve test bench

Jwt type welding type hydraulic valve testing bench, to both sides of the host frame seal disc and welding the inner hole of the valve for positioning and welding groove of the valve is sealed. By moving the machine frame to carry out experimental work of welding at both ends of the valve rupture plane clamping. Left to the frame and the sealing disc is fixed device, right to a moving frame to activities, were tested according to the distance of the valve is adjusted, valve to be tested without additional influence on the testing result of external force, and meets the requirements specified in the national standard of the valve is tested by.

The structure of the machine can be divided for hydraulic system, mechanical structure, electrical control system. About a frame, a moving frame, hydraulic pressure supply device and medium circulation water system components. The workpiece pressing using mobile rack cylinder direct drive to achieve the reliable compression. Right to the mobile frame can be adjusted according to the tested valve length distance, and has good performance, simple structure etc.. The machine is equipped with a low pressure pump and high pressure hydraulic pressure supply pump device.

Pigging ball valve feature
1. Trunnion mounted ball; proven shut-off style design with energized upstream sealing seat, reduces the number of valves and controls required in traditional pig launching skids.
2. Pigging valve is superior to conventional devices for cleaning pipelines in its compact structure, reliable properties, handy operation, easy maintenance and lower cost for purchasing and running.
3. The inside of pipe without gaps, avoid existing foreign body;
4. Pigging valve's sealing ring are simple and all o-rings, maintain easy.
5. Pig valves could be pressure relief by relief valves, easy to open/shut of quick closure.
6. Standardized safety design such as antistatic design; cleanout design; zero leakage.


Plywood case