Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Features 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1Measure the switch angle steel whether is square when installed 2Measure the internal lock switch parts whether is square when installed 3Measure the switch rail whether creeping 4 Measure the sleeper whether square when installed.
PRODUCT SPECIFICATIONS
Model
LJFG-I
Type
Railway Track Square
Material
Aluminum alloy
Size
1760mm
Sliding Digital Rail Wear Gauge
Sliding Digital Rail Wear Gauge is used for measuring rail profile head loss and side cut , digital display.
Specification
Model
LJ-HGM
Type
Rail Wear Measuring Gauge
Material
Aluminium alloy
Dimensions (L x W x H) (mm)
30*10*12cm
Lateral rail wear
0-15mm
Vertical rail wear
0-25mm
Score value
0.1
Indication error
â?¤ �± 0. 15mm
Supply Customize
UIC60,115RE, 68TR, 136RE ect all profiles
Single-side rail chamfering device is a special tool for eliminating the stress concentration at the sharp corner after rail
drilling operation. It has the advantages of compact structure, simple operation, small size, light weight and convenient carrying etc. It is an indispensable tool in rail drilling works.
Single-Side Rail Chamfering Device
Single-Side Rail Chamfering Device
Product Parameters
Model
LJ-DJQ-D
Type
Rail Chamfering Tool
Material
Stainless Steel
Dimensions (L x W x H) (mm)
180* 50*190mm
Max chamfer diameter
�¦ 31~�¦32
Max chamfer cutting torque
Tmax = 10N â?¢ m
Max moving forceh of handle rod
Fmax = 55N (L = 180)
Working efficiency
1 piece /10 seconds
Overall size
180* 50*190mm
Machine weight
1KG
Railway Brake Shoes
Brake Shoes braking is to place iron brake shoes on one or two rails, and the train rolling wheel slides along the rail after
pressing the brake shoes. The rolling friction between the wheel and rail changes into sliding friction to prevent the wheel from moving forward and play the role of braking.
Specification
Model
LJ-TX
Type
Railway Brake Shoes
Material
Stainless Steel
Dimensions (L x W x H) (mm)
300*300*150mm
Weight
5.6kg
Railway Singal Light
It can be widely used in railroad , shipping and other trafficand transportation industries and some special industriesas signal indication , safety warning and working lighting.
Specification
Model
MSL4730
Type
Railway Signal Light
Material
Plastic
Dimensions (L x W x H) (mm)
66*170mm
Rated Voltage
DC3.7V
Rated capacity
3.8Ah/3800mAh
Lift circle
â?¥100000h
Battery burn time-singal
â?¥ 12h
Battery burn time-lighting
â?¥10h
Bttery life circle
â?¥1000
Charging time
â?¤10h
Weight
0.25kg
Shell protection grade
IP65
29666 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
Magnetic Rail Versine Measuring Kits
Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate.
Specification
Model
LJ-XXJ
Type
Versine Measuring Device
Material
Plastic
Measuring Range
100m
Dimension
140*210*145mm
Weight
1.65kg
item
value
Type
Fishplate
Material
45# steel, 45Mn
Dimensions (L x W x H) (mm)
790/820mm
Place of Origin
China
Hubei
Brand Name
Linkage
Type
Fishplate
Material
45# steel, 45Mn
Dimensions (L x W x H) (mm)
790/820mm
Place of Origin
China (Mainland)
Model Number
P38/ P43/ P50/ P60
Name
P50 fish plate
Application
P50 rail joint
Standard
YB(T)58-1987
Producing process
Hot rolled
Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track.
Benefits
1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm
2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance
3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely.
4.Customizable
5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation
6.Multifunctions
1)Measure the switch angle steel whether is square when installed
2)Measure the internal lock switch parts whether is square when installed
3)Measure the switch rail whether creeping
4) Measure the sleeper whether square when installed.
Product Parameters
Model Size
LJ-FC-I 1760mm
LJ-FC-IA 2000mm
Other customizable
Rail thermometer
RT rail temperature table is not only dedicated to measure the temperature of the railway rails, but also can measure the air
temperature and the surface temperature of other objects.
Roller manufactured in special steel and used for moving long-welded rails. The supporting structure is composed of a roller thatruns on two bearings and it is able to support the weight of the rail.
Recommend Products
Frequently bought together
Railway saving back tool for measuring 1000mm 1067mm,1435mm,1520mm ,1600mm ,1676mm track gauge
Digital Rail Corrugation Gauge
Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement method.It is mainly used for measuring rail top surface and side surface corrugation wear value.
BENEFITS
It's simple in operation, compact in size, easy to carry, high precision in measurement, reliable in installation and positioning, simple in use Convenient;Easy to site construction, ensure the quality of work.
Specification
Model
LJ-BM-A
Type
Rail Corrugation Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
120*12*24 cm
Horizontal measure range
1000mm
Vertical measure range
-8 - +25mm
Accuracy
�±0.05mm
Resolution
0.01mm
Repeat error
0.02mm
Working temperature
-5 - 40
Rail turner Rail turn bar
Turnover device consists of: cast rail turner head, high-quality carbon structural steel rod tip and seamless steel pipe welded
together, utility model turn rail device, turning rail rail with a manual clamp tool.
Easy to use, labor-saving, high efficiency, low labor intensity, easy to carry the railway staff, the railway sector is a
dedicated tool for standing.
Details Images
Rail Turn Bar Railroad Maintenance Tools Solutions
rail turn bar
Rail Turn Bar Railroad Maintenance Tools Solutions
rail turner
PRODUCT SPECIFICATIONS
Type
rail turner
length
1500mm
Applicable rail type
43/50/60 rail
This rerailer tool is specially developed to solve the problem of double track of train and mine car. Use left and right in pairs. Scope of application: running in the mine ground underground line of the car, due to overspeed, collision, line quality and other reasons, often derailment off track phenomenon, to production, safety has a great impact. Suitable for 24kg/m rail left and right in pairs.
Rail Alignment Frame
GDJ-I Rail Alignment Frames for aluminothermic welding is a new tool for various of rails alignment, it's a special device used for rail alignment when thermit welding. It has the features of reasonable structure, good performance, perfect quality, and save laber.
Specification
Model
GDJ-I
Max. Hoisting force
15kN
Span
460mm
Weight
21kg
Dimension
600x540x170mm
YD-22III Auto hydraulic tamping machine is an updated product based on the experience of domestic and foreign users on the tamping machine , using new materials and new technologies. This machine is suitable for the tamping operation after the large-scale and middle-repair cleaning operations of different types of rails and concrete sleeper lines ; it is also suitable for the tamping operation of the ballast on the newly-built line . The automatic hydraulic running function is added which can realize non-human Push forward or backward . The machine has superior performance , reasonable structure safety and reliability , and high operating efficiency , which fully meetsthe needs of railway ballast tamping operations
PRODUCT SPECIFICATIONS
Model
YD-22III
Type
Automatic Hydraulic Rail Tamping Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
2440*1860*2050mm
Engine
Honda GX390 four-stroke petrol engine9.5kw
Power
9.5kw
RPM
3600r / m
Hydraulic system pressure
5~6MPa
Vibrating frequency
66.7Hz
Exciting force
22KN
Clamping force
6.5KN*2 Inserting depth:110mm +10mm
Production efficiency
260 sleepers/ hour
Weight
1275kg
The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy.
The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying .
The lightweight ,reliable and easy to use device offers unique measurement accuracy. It is easy to carry, and night-time and tunnel work.
50kg fishplate is used for P50 rail to rail joint, each end of rail has three holes, use a pair of fishplate to clamp the rail,
use fishbolts to thread the holes and fix it.
Specification
item
value
Type
Fishplate
Material
45# steel, 45Mn
Dimensions (L x W x H) (mm)
790/820mm
Place of Origin
China
Hubei
Brand Name
Linkage
Type
Fishplate
Material
45# steel, 45Mn
Dimensions (L x W x H) (mm)
790/820mm
Place of Origin
China (Mainland)
Model Number
P38/ P43/ P50/ P60
Name
P50 fish plate
Application
P50 rail joint
Standard
YB(T)58-1987
Producing process
Hot rolled
Digital Rail Corrugation Wear Gauge
Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement method.It is mainly used for measuring rail top surface and side surface corrugation wear value.
BENEFITS
Itâ??s simple in operation, compact in size, easy to carry, high precision in measurement, reliable in installation and positioning,simple in use Convenient;Easy to site construction, ensure the quality of work.
Specification
Model
LJ-BM-A
Type
Rail Corrugation Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
120*12*24 cm
Horizontal measure range
1000mm
Vertical measure range
-8 - +25mm
Accuracy
�±0.05mm
Usage
rail corrugation wear gauge for rail measurement
Quality Control:
ISO9001
Resolution
0.01mm
Repeat error
0.02mm
Working temperature
-5 - 40â??
Certificate
CE
Standard
CRCC
Digital Switch Rail Lateral Wear Gauge
The Switch Rail Lateral Wear is used to measure the switch rail lateral wear and the descent height value of the switch rail ,this device can be used for all types of switch rail.
BENEFITS
Switch Rail Lateral Wear Gauge has the advantages of high measuring accuracy,easy to operate,high reliability,small volume,light weight etc.
Specification
Model
LJ-JGCM-I
Type
Switch Rail Lateral Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
315*190*200 mm
Vertical wear measure range
92-193mm
Lateral wear measure range
0-120mm
Resolution
0.01mm
Indication error
± 0. 15mm
Digital Switch Rail Lateral Wear Gauge
The Switch Rail Lateral Wear is used to measure the switch rail lateral wear and the descent height value of the switch rail ,this device can be used for all types of switch rail.
BENEFITS
Switch Rail Lateral Wear Gauge has the advantages of high measuring accuracy,easy to operate,high reliability,small volume,light weight etc.
Specification
Model
LJ-JGCM-I
Type
Switch Rail Lateral Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
315*190*200 mm
Vertical wear measure range
92-193mm
Lateral wear measure range
0-120mm
Resolution
0.01mm
Indication error
± 0. 15mm
29666 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
