Battery Powered Vertical Rail Tamper The Battery Powered Vertical Rail Tamper is used for tamping and compacting the ballast to effectively correct track level errors. Specification Model LJ-LZD2101 Type Rail Tamper Material Stainless Steel Dimensions (L x W x H) (mm) 1050* 345 *450mm Rated capacity of the power battery pack 24Ah Weight 18 Kg (including 1.2kg spike) Excitation force 4,100N Tamper Pick amplitude 1.6 mm Vibration frequency 136HZ Intelligent power display Display battery time and power Waterproof grade IP45 Total weight 18 Kg (including spike but not battery pack)
Rail Grinding Machine The GMC-12 II type rail polishing car is used for polishing and repairing defects and profiles of rails on lines and turnouts, such as corrugation, fat edges, fish scales, low weld collapse, and scratches. Repairing and preventive polishing for small radius curve corrugation, fish scale pattern, fat edge and turnout rail damage can effectively reduce the waste of resources when large grinding cars grind curved rails, and make up for the low mechanical efficiency of small grinding cars.
Contact rail gauge for METRO measurement The contact rail gauge is a gauge for measuring the parameters of the subway contact rail. Measurement parameters can be customized according to customer requirements, detachable and easy to carry. the main ruler body use high strength square tube aluminum alloy. advantages: precise measurement, new style, reasonable design.
Rail Gap Gauge Rail Gap Gauge is used for measuring the distance between two adjoining rails Benefits: Joint Gap Measuring Device shape: similar to carrot, tapered. This product is made of stainless steel , long service life. Easy to operate and easy to carry.
Track gauge regulator Gauge adjuster is a new type of hydraulic tool suitable for rerouting rails on 50kg/m and 60kg/m rail lines and adjusting the position of concrete sleepers during line maintenance or laying new lines The gauge adjuster is a multifunctional combined railway maintenance and expansion tool. The gauge adjuster is mainly used for line diversion operations; it is suitable for gauge adjustment at forks and forks. Gauge adjuster parameters: thrust 15KN, stroke 30mm
Railway Singal Light It can be widely used in railroad , shipping and other trafficand transportation industries and some special industriesas signal indication , safety warning and working lighting.
Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation (cant) . It can be used for track inspection and fine adjustment of rail gauge. This product has the advantages of fast measuring speed, stable pushing rod, easy to carry,and night-time and tunnel work,legible even in direct sunlight are supported.It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying.
1. Petrol engine: Husqvarna 365X-Torp two stroke petrol engine 2. Rated Revolution: 12000r / min 3. Rated power: 3.6kw 4. Spindle speed: 1130 r/min 5. Torque: â?¥ 1900 N.m 6. Machine weight:20kg (including auxiliary frame) 18kg (without auxiliary rack) 7. Overall size: 700
Analogue track gauge is used for measuring the railway track gauge,check rail gauge, back to back distance,super-elevation. It is Suitbale for railway speed not greater than 160km/h.Traditional compass is more easier for rail workers to accept and operate.Light weight structure is convenient to carry.
YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries. This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation.
Analogue track gauge is used for measuring the railway track gauge,check rail gauge, back to back distance,super-elevation. It is Suitbale for railway speed not greater than 160km/h.Traditional compass is more easier for rail workers to accept and operate.Light weight structure is convenient to carry.
L-shaped track ruler is a special measuring tool used for measuring the distance between the inner side of railway track and the base mark and the height between the plane on the rail and the base mark. 1. Accurate measurement:keep long-term stability. 2. Easy operate 3. Insulated design
Digital Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge, back to back distance and flangeway clearance through microelectronics, embedded and sensor technologies and OLED display screen.
Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation (cant) . It can be used for track inspection and fine adjustment of rail gauge. This product has the advantages of fast measuring speed, stable pushing rod, easy to carry,and night-time and tunnel work,legible even in direct sunlight are supported.It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying.
Portable Rolling Track Gauge Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation(cant), check rail gauge and back to back distance measurement.It can be used for track inspection and fine adjustment of rail gauge.This product has the advantages of fast measuring speed, stable pushing rod, easy to carry,and night-time and tunnel work,legible even in direct sunlight are supported.It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying. Features The benefits of our rolling gauge : 1. Measure the track gauge, cant without bend over your back. 2. Light weight : around 6.5kg , one person operation. 3. BT connection, data uploading and analysis system. 4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge)
Rail turner Rail turn bar Turnover device consists of: cast rail turner head, high-quality carbon structural steel rod tip and seamless steel pipe welded together, utility model turn rail device, turning rail rail with a manual clamp tool. Easy to use, labor-saving, high efficiency, low labor intensity, easy to carry the railway staff, the railway sector is a dedicated tool for standing.
Rail Gap Gauge Rail Gap Gauge is used for measuring the distance between two adjoining rails Benefits: Joint Gap Measuring Device shape: similar to carrot, tapered. This product is made of stainless steel , long service life. Easy to operate and easy to carry.
Model LJ-ZJC-30 Type L Square Ruler Material Stainless Steel Dimensions (L x W x H) (mm) 300*130mm Scale 1mm Length 300 mm
Rail Gap Gauge Rail Gap Gauge is used for measuring the distance between two adjoining rails Benefits: Joint Gap Measuring Device shape: similar to carrot, tapered. This product is made of stainless steel , long service life. Easy to operate and easy to carry.
YD-22III Auto Hydraulic Rail Tamping Machine YD-22III Auto hydraulic tamping machine is an updated product based on the experience of domestic and foreign users on the tamping machine , using new materials and new technologies. This machine is suitable for the tamping operation after the large-scale and middle-repair cleaning operations of different types of rails and concrete sleeper lines ; it is also suitable for the tamping operation of the ballast on the newly-built line . The automatic hydraulic running function is added which can realize non-human Push forward or backward . The machine has superior performance , reasonable structure safety and reliability , and high operating efficiency , which fully meets the needs of railway ballast tamping operations
