Model:
cdx, RS-HEV-DHT-T2S800H-01
Year:
2016-
Car Fitment:
ACURA (GAC)
Warranty:
12 months
Place of Origin:
Guangdong, China
Brand Name:
rawsuns
Certification:
-
Car Model:
no more than 18 tons
Size:
-
Name:
Rawsuns NEW 320Nm ev engine planetary gearbox auto transmission gear
Maximum input torque:
320Nm
Maximum input speed:
6000r/min
Front row degrees of freedom:
2
Rear row degrees of freedom:
1
Oil pump type:
Mechanical oil pump
Lubrication method:
Variable flow forced lubrication
Recommended application system:
deep hybrid
Recommended application model:
M3,N3 no more than 18 tons
Product Name: Rawsuns gearbox ev kit electric motor ev conversion kit
Warranty: 12 months
Place of Origin: Guangdong,China
Brand Name: Rawsuns
Model Number: R6S2800
Type: Gearbox
Frequency: 50HZ
Phase: Three-phase
Certification: ce
Protect Feature: Waterproof
AC Voltage: 115/120 V
Efficiency: IE 2
Maximum input torque(Nm): 2400/2800
Maximum input speed(r/min): 3000
Gear ratio: 7.389/4.616/2.964/1.96/1.369/1
Lubricating oil quantity(L): 8
weight (kg): 210
Application: Pure electric system
Rated Power:0.4KW~9551KW
Rated Torque:Up to 1920KN.m
Gear Arrangement:Planetary with helical or bevel gearbox
Input Speed:50HZ or 60HZ of 4Pole,6Pole and 8pole motor
Ratio:i=25~4000
Installation Form:Flange Mounted, Foot Mounted or Torque Arm Mounted
Wooden case, Pallet
29752 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
Linear guides, ball screw, linear bearings, shaft, rod end bearings, cam follower roller bearing, igus bearings.Linear guides, ball screw, linear bearings, shaft, rod end bearings, cam follower roller bearing, igus bearings
(1) The input speed is general n, or less than 1500r/min
(2) The speed of the gears is not greater than 20 m/s.
(3) Working environment - 40 ~ 50 , the mouth is lower than 0 , before the start of lubricating oil should be preheated to 0above, the speed reducer can be used in positive and negative two directions.
Characteristics:
(1) The center distance, the main parameters such as the transmission ratio are optimized, the main zero and the parts are interchangeable.
(2) The gears are made of high quality alloy steel, which is hardened by carburizing and hardening, and the hardness of the teeth is called hrc54-62.
(3) Small size, light weight, high precision, high bearing capacity, high efficiency, long life, high reliability, stable transmission and low noise.
(4) The oil pool is normally used for cooling, and when the heat power is not satisfied, the cooling coil can be cooled by circulating oil lubrication or fan.
Application:
This product is widely applied to fields of metallurgy, mines, hoisting, transportation, cement, architecture, chemical, textile, printing, dyeing and pharmaceutical etc.
Power Range: 4â??6000 KW
Transmission Ration Range: 1.25â??450
Output Torque: top to 950 Kn.m
Characteristics:
Design
1.) Highly standard modular designed, more sizes with a reduced variety of parts.
2.) Higher operational reliability combined with increased power capacity.
Mounting position
The gear units can be supplied for either horizontal or vertical installation.
Other arrangements are also possible on request.
Long service life
Under the condition of accurately s
electing type size and the normal maintenance and use, main components (expect those easily-disabled) can last as long as up to more than 50,000 hours.
Low noise
All key components are finished by precisely machining; grinding the gears; designing noise-absorbing housings; accurate assembly, and finally tested, and therefore, fairly low noise is reached.
Thermal conduction
1.) The gear units have a high efficiency.
2.) Through enlarged housing surface areas.
3.) Because large fans incorporating a new type of air conduction fan cowl are being used.
Our company was established in 1998 as a professional manufacturer of precise planetary gearbox,actuator and motorized pulleys etc.And our head office is in shanghai city,the factory is in dandong city ,liaoning province.
The factory total covers about an area of 1000 square meters,and we can supply about ten thousand pcs gearbox every month,and about two hundred thousand pcs every year.
And now we have 4 products series, our core business: gearbox; second:
gearmotor, and then the actuator ,and others relevant drive & control products.
Inion
Steel output shaft stainless steel
Output flange
Aluminum bearing at output ball bearing
Permissible motor speed
6, 000 rpm max. Permissible radial load =20n
Max. Permissible axial load
=20n max. Permissible force for press fits =100n
Radial play
=0.04mm axial play =0.04 mm
Recommended temperature range
-25 to +125?
29752 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
