Place of Origin Hubei, China
Type Rail Cutting Machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 800*560*500mm
Brand Name Linkage
Engine GX270 petrol engine 5.1KW
Specification of cutting disc 400*32 *4mm
Cutting disc no. of revolutions 3320 r/min
Linear speed of cutting disc 70m/s
Cutting accuracy Verticalityâ?¤0. 4mm, flatnessâ?¤0.3mm
Cutting time 2 min ( cut off 60kg/m rail)
Weight 50kg
Place of Origin Hubei, China
Type Rail Cutting Machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 670*600*510mm
Brand Name Linkage
Internal combustion engine HONDA GX200
Engine Power 4.8kW
Engine Speed 3600r / min
Thin grinding wheel (spindle) Spindle speed 3030r / min
Specification (linear velocity) 400 * 32 * 4 (â?¥70m /s)
Cutting time 60kg / m rail, â?¤120S
Number of usage 50kg /m rail, use â?¥ 4 times
Number of usage 2 60kg /m rail, use â?¥ 3 times
Machine weight 39.5kg
YD-22 hydraulic Tamping Machine is a kind of professional machinery used for railway line ballast tamping maintenance except for turnouts. It can be operated with train inervail time, without closing sections. It is equipped with three power modes. They are petrol, diesel and electric
YD-22 hydraulic Tamping Machine is a kind of professional machinery used for railway line ballast tamping maintenance except for turnouts. It can be operated with train inervail time, without closing sections. It is equipped with three power modes. They are petrol, diesel and electric
NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
29517 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
NQG-5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. It's a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
Model
LJ-ZCM-A
Type
Digital Rail Frog Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
380*166*25mm
Measure range
0~40mm
Score value
0.01mm
Indication error
± 0. 15mm
Working temperature
-10~+40
Main ruler measure range
0~380mm
Model
LJ-ZCM-A
Type
Digital Rail Frog Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
380*166*25mm
Measure range
0~40mm
Score value
0.01mm
Indication error
± 0. 15mm
Working tempareture
-10~+40
Main ruler measure range
0~380mm
Analogue track gauge is used for measuring the railway track gauge,check rail gauge, back to back distance,super-elevation.
It is Suitbale for railway speed not greater than 160km/h.Traditional compass is more easier for rail workers to accept and
operate.Light weight structure is convenient to carry.
FEATURE
Analogue track gauge has the advantages of affordable price,simple operate and easy calibrate.
Digital Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge, back to back distance and flangeway clearance through microelectronics, embedded and sensor technologies and OLED display screen.
FEATURE
1. Large LED backlit display: especially suitable for day outside and dark night
2. Quick calibration operation: simple measurement process
3. Large capacity battery:long standby time
4. Accurate measurement:keep long-term stability
5. Temperature compensation :working temperature is -30~+55
6. Insulated design
7. Anti-electromagnetic interference
8. Waterproof:could use in rainy day
9. power saving function: no operation within 15 minutes, the system will automatically shut down.
10. Approval by CHINA ACADEMY OF RAILWAY SCIENCES
11.1000mm,1067mm,1435mm,1520mm,1600mm,1676mm track gauge is available.
LJ-LDC2001 Electric Rail Cutting Machine
Lithium Battery Rail Cutting Machine is professional for rail cutting work.
Benefits
1. Passed the strict verification of protection grade, and supports the work in rainy and snowy weather;
2. Professional lithium battery which can support long time operation
3. Can be worked under under extreme conditions, such as high cold and high altitude;
4. Lithium battery passed the safety inspection of the national authority
5. Adjustable clamp , Suitable for cutting various type of rail.
6. Light weight , portable to carry and operate.
Specification
Model
LJ-LDC2001
Type
Electric Rail Cutting Machine
Material
Aluminium
Rated voltage (AC.V)
220
Motor power (Kw)
7
Weight (Kg)
13
Battery pack capacity(Ah)
12-20 Optional
Operating temperature range(°C)
-40~50°C
NQG-5.8 Abrasive Rail Saw
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
PRODUCT SPECIFICATIONS
Model
NQGâ??5.8
Type
Abrasive Rail Saw
Material
Stainless Steel
Dimensions (L x W x H) (mm)
850*480*500mm
Engine
Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW
Cutting disc form
Double- layer reinforced wire mesh
Linear speed of cutting disc
100 m/s
Rated RPM
4500 r/min
Specification of cutting disc
355x 25.4 x3.8mm
Cutting accuracy
Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm
Cutting time
110s( cut off 60kg/m rail)
Fuel tank capacity
1.25 L
Weight
22kg
Origin from Hubei, China
Species Other
The material is alumunium
Equipment size 750 * 800 * 350mm
Linkage
Product name Rail Ultrasonic Flaw Detector
Usage Rail Ultrasonic Flaw Detector
Application Rail Ultrasonic Flaw Detector
Standard crcc
Quality Control iso
Warranty 1YEAR
Customize yes
Material alumunium
Dimensions (L x W x H) (mm) 1500*400*250mm
Brand Name Linkage
Product name Hydraulic rail tamping machine
Usage Hydraulic rail tamping machine
Application Hydraulic rail tamping machine
Standard crcc
Quality Control iso
Certificate CE
Warranty 1YEAR
Customize yes
Other name track ballast tamping machine
function railway ballast tamping work
Packaging and delivery
Selling Units: Single item
Single package size: 280X150X150 cm
Single gross weight: 400.000 kg
Model
YD-22
Power supply
Two- stroke petrol engine : 6.6kW
Working Pressure
5Mpa
Working efficiency
260 slepers/hour
Tamping insertion depth
90~120mm under seepers
Origin from Hubei, China
Type railway engine
Material Stainless steel
Device size 800mm x 560mm x 500 mm
Linkage
Type: Rail cutting machine
Apply track maintenance work
Engine model: GX270 Fuel injection 5.1KW
Specification Cutting disc: 400*32 * 4 mm cm
Cutting disc no. RPM: 3320 RPM/min
Linear speed cutting sheet: 70 m/s
Cutting accuracy: Verticality 0.4mm, flatness 0.3mm
Cutting time: 2 min (cut 60kg /m rail)
Warranty: 1 year
Origin from Hubei, China
Type Angle Grinder
Aluminium
Equipment size 780*270 *310 mm
Linkage
Model SNGM-180
Petrol engine Two-stroke gasoline engine
Power 1.42kW
Speed â?¥7500r / min
Grinding wheel 180 *22.2 * 6 Or 150* 22* 6
Wheel speed 70m / s
The spindle speed 6000r / min
Machine weight 7k
Origin from Hubei, China
Old and New
Type track maintenance
Stainless Steel
Device size 1900*1200 * 2500mm
Linkage
Product name Automatic hydraulic track tamper
Material Stainless steel
Origin: Hubei, China
Engine Honda GX390 four-stroke gasoline engine
RPM 3600r / m
Vibration frequency: 66.7Hz
Max. Insertion force: 16KN
Production efficiency: â?¥ 260 sleeper/hour
Hydraulic system pressure: 5 ~ 6MPa
Power supply 9.5kw
29517 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
