NCM-5.1 internal combustion turnout grinding machine is mainly used for the maintenance of steel rail turnouts, and can also be used for the maintenance of ordinary rails. In addition to inheriting the advantages of the original model such as high working efficiency, simple operation, fast on and off track, and wide adaptability, this machine has stronger power and higher working efficiency. It has been widely praised by users.
Feeler gauge is a measuring tool, mainly used for measuring gap spacing. It is a gauge composed of a group of thin steel sheets with different thickness differences. Feeler gauge is used to measure gap size. When checking whether the measured size is qualified, this method can be used to judge, or the inspector can judge according to the tightness of the fit between the feeler gauge and the measured surface. Our feeler gauge series includes different combinations, including feeler gauges, rail gap gauges, and steel plate rulers with different ranges, which can be used together.
The detection of the normal vector of railway line curve is a basic and regular work in railway line maintenance and inspection. The LJ-XXJ large-range string frame produced by our company is mainly composed of two parts: the wire wheel positioning frame and the terminal positioning frame. It is easy to carry and easy to operate. One person can complete the measurement of the normal vector of railway rails.
Petrol Engine Rail Drilling Machine
This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, a screw nut clamping mechanism with quick opening function, fast clamping, accurate positioning, fast drilling, simple operation and safety use.
29758 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
Workshop Hydraulic Horizontal Rail Bender for Bending and Lining Flat Bottom Rails.
Hydraulic Vertical Rail Bender is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems.
Hydraulic rail tensor rail puller
Hydraulic Rail Puller Rail Tensor
Itâ??s suitable for rail 50kg/m,60kg/m and 75kg/m type rail stress relief and seamless long rail relaying. While operating in the
field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a
rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. By locking the rail
waist, it will not hurt the rail head surface, one machine with a variety of configuration meets the field work in different ways,
it possesses features of unique design, light weight, simple & convenient manipulation and powerful rail pulling force. The
machine can not only be used for repairing the broken rails of seamless tracks, but also can be used for stress relief of seamless
tracks and section adjustment of track seams in common tracks, and is suitable for various rail types. Using this product can
change the traditional method of repairing broken rails, that is, re-welding in situ without inserting short rails, saving time ,
Save labor, expand the operating rail temperature range, and prevent the actual lock rail temperature from changing
ND-1 Portable Rail Tamper
ND-1 portable tamper is a special machine for ballast tamping on railway lines and turmouts. Choose high-vibration, high-power gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact the ballat. The impact force is large and the tamping effect is good. The whole machin is smal in size, ight. in. weight, and convenient. to go up and down, which can ffectively guarantee driving safety during operation.
Electric Rail Grinding Machine
The design of FMG-2.2 electric rail profile grinder allows you accurate and stable profile grinding up to 90�°about the rail head by rotation of the machine using its turming device and its inclinable operating arm. According to customer needs, 380V three-phase motor can be selected as power or 220V single-phase power as power. With good visibility of the grinding area assures you of a high quality finish.
Hydraulic Track Gauge Adjuster
Hydraulic Track Gauge Adjuster is used for the diversion operation of ballastless high-speed railway lines and turnouts. When in use, the support mechanism is passed through the bottom of two steel rails, one end is clamped on one steel rail, and the hydraulic working mechanism is placed on the inner or outer side of the other steel rail of the support mechanism to adjust the track gauge, achieving the purpose of diversion operation
Track Gauge Calibration Device
The calibrator is a railway measuring instrument that used to calibrate the 1435mm track gauge, the guard rail check gauge, the guard rail face gauge and the super-elevation.
Magnetic Rail Versine Measuring Kits
Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate.
Magnetic Rail Versine Measuring Kits
Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate.
L-shaped track ruler(right-angle track) is a special measuring tool used for measuring the distance between the inner side of railway track and the base mark and the height between the plane on the rail and the base mark.
The main part of the wheel tread is an inward inclination of 1:40 . In order to make the top of the rail track under the wheel load with cone tread stressed uniformly, decrease load offset, reduce rail web stress, avoid slit between rail head and rail web, the railway track shall not be laid upright for straight line, it shall be inward inclined, this inward inclination of rail called Rail Cant, it is a high precision ,portable , numeric rail geometrical testing tool.
YD-22 hydraulic Tamping Machine for track maintenance work
YD-22 hydraulic Tamping Machine is a kind of professional machinery used for railway line ballast tamping maintenance except for
turnouts. It can be operated with train inerval time, without closing sections. It is equipped with three power modes. They are
petrol, diesel and electric.
Benefits:
Engine types: Honda GX390 petrol engine or SF 190 diesel engine or electric engine.
It is suitable for the tamping operation in the new construction of ordinary railway lines and the large-scaie or medium-scale
railway line maintenance
It can complete the tamping operation of various types of concrete sleepers and wooden sleepers
Equipped with automatic rail clamping device
Equiped with the f-tac walking frame, the machine can be removed off at any place and any time
NDG-1 Portable Rail Tamper
NDG-1 portable tamper is a special small track maintenance machine for tamping ballast uinder sleepers. Because of its light weight, it can be on and off the track at the same time with the operator. Therefore, the interval between trains can be used for ballast tamping. It is suitable for the maintenance and tamping operation of main line and tumout.
ND-1 portable tamper is a special machine for ballast tamping on railway lines and turmouts. Choose high-vibration, high-power gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact the ballat. The impact force is large and the tamping effect is good. The whole machin is smal in size, ight. in. weight, and convenient. to go up and down, which can ffectively guarantee driving safety during operation.
YD-22III Automatic hydraulic Tamping Machine for track maintenance work
YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries.This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation
