1. Manufacturing Technique Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. 2. Properties of titanium sintered porous materials: Pore diameter uniformity, pore stability, high separation efficiency. High porosity, low filtration resistance, and high permeability. Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance. Morphological stability, no particle shedding, comply with food hygiene and pharmaceutical GMP requirements. Good mechanical properties, low differential pressure, large flow. Strong anti-microbial ability, does not interact with microorganisms. Online regeneration, easy cleaning, long service life. Excellent biocompatibility can be widely used in biological, food, pharmaceutical, medical industry. Excellent electromagnetic shielding performance. Good damping and shock resistance. 3. Application of titanium sintered porous materials Titanium sintered porous materials are mostly used for filtering materials, electrodes, heat transfer materials, catalyst carrier materials, noise-canceling materials according to their physical and structural properties. Decarburization filtration of pharmaceutical liquids. Electrolytic gas industry precision filtration, gas distribution. The medical industry makes biological implants. Water treatment industry odor sterilization filtration and ozone aeration. Clarification and filtration in food and beverage processing. Prefiltration of reverse osmosis system for the electronics industry. Terminal filtration of petroleum products in the petrochemical industry and filtration of carbonic alkali liquid in the chemical industry. High-pressure air filtration in the aerospace industry. Filtration and recovery of the precious metal catalysts in the fine chemical industry. The electrode matrix of a fuel cell. Catalyst carrier in gas and liquid catalytic reactions. 4.Precautions for the use of titanium sintered porous materials: During installation, disassembly and clean avoid scratches, collisions and falls on hard objects. When using, the filtrate is filtered from the outside in to avoid the reverse direction. Avoid instant pressurization when the filter element works. When the filtration efficiency is less than 50%, the filter element should be cleaned in time. When cleaning the filter element, the first backflow with pure gas, backflow pressure is 1.5 times the working pressure, each time for 3-5 seconds, and 4-6 times, then backwash with clean liquid for 3-5 minutes, repeat 2-3 times. If the filter element is not good after online back blowing and backwashing, it should be removed and cleaned in time.
Specification: 1.Standard:ASTMF2063-12 2.Sheet size: Thickness 0.1-10.0mm Width 500mm Length 1000mm 3.Surface: Acid cleaning/ polished 4.AF range:-20-100 Degree 5.Density:6.45g/cc 6.Feature: superelastic/ shape memory 7.Application:medical 8.Width:300mm 9.Length:as required Place of origin: China Payment term: T/T,L/C etc. Lead time: 15-30days Port of shipment:Xiamen,China
Type:� Superelastic nickel-titanium alloy Application:Medical Technique:Seamless Grade:GR9 Shape:Round Diameter:0.25-6mm Production Capacity:100000PCS/Monthly Port:Xiamen, China� Payment Terms:T/T, L/C etc.
Product Name: Titanium Wire Material: GR.1~GR.4 GR.5 (Ti-6Al-4V) GR.7 (Ti- 0.12~0.25Pd) GR. 9 (Ti-3Al-2.5V) GR.19 (Ti-3Al-8V-6Cr-4Mo-4Zr) GR.36 (Ti-45Nb) ERTi-1~ ERTi-4 ERTi-7 ERTi-9 ERTi-10 TB 13 (Ti-4Al-22V) 2B (Ti-2Al-1.5V) Ti-15V-3Al-3Cr-3Sn Details: EnergyTi-Professional titanium rod, titanium alloy rod, titanium square rod, titanium round rod, production suppliers, spot supply, complete standards, specifications. Industrial titanium wire, titanium alloy wire, pure titanium glasses wire, titanium straight wire, pure titanium wire, titanium welding wire, titanium wire for hanging hook, titanium coiled bar, titanium polished wire, medical titanium wire, titanium nickel alloy wire.Titanium wire is mainly made of nanometer zinc-titanium wire film, which is made of polymer material, anti-corrosion and anti-acid technology. It is widely used in chemical industry, petroleum, pharmaceutical industry, papermaking, artificial leather, food processing, agricultural products and aquatic products. It has the characteristics of acid resistance, abrasion resistance and corrosion resistance. Size: Dia 0.03-6.0mm MOQ:5 kilograms 1000,2000,3000mm or upon customer's request Production standard: GB,ASTM, BS, BSW, ISO ASTM B863, ASTM B348, ASTM F2063, ASTM F67, ASTM F136, AWS A5.16, ISO 5832-2, ISO 5832-3, �?�?�¡�¢27265 Production status and manufacturing process of titanium alloy rod: Production state: hot processing state (R), cold processing state (Y), return state (M) Polishing, picking, acid washed, black oxide Packing: Straight bar;Volume;Disc winding wheel;The coil is not wound round the wheel;The spool Export wooden case packing or according to customer's request
Product Name: Titanium Bar Material: GR.1~GR.4 GR.5 (Ti-6Al-4V) GR.7 (Ti- 0.12~0.25Pd) GR. 9(Ti-3Al-2.5V) GR.23 ( Ti-6Al-4V ELI) GR.29 (Ti-6Al-4VELI-0.08-0.14Ru) GR.36 (Ti-45Nb) Ti-3.5Al-10Mo-8V-1Fe Ti-15V-3Al-3Cr-3Sn Ti-32Mo Ti-6Al-2Sn-4Zr-2Mo Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Ti-3Al-5Mo-4.5V Ti-6Al-7Nb Ti-13Nb-13Zr Ti-6Al-2Sn-4Zr-6Mo Other brands can be customized Details: EnergyTi-Professional titanium rod, titanium alloy rod, titanium square rod, titanium round rod, production suppliers, spot supply, complete standards, specifications. Titanium alloy rod is mainly used in mechanical equipment, electroplating equipment, chemical equipment, petroleum coking zinc equipment, medical, various precision parts and other industries. Size: Rolling:�¦8mm~�¦39mm x L Length:300-6000mm Forging:�¦30mm~�¦400mm x L Production standard: ASTM F67, ASTM F136, ASTM F1295, ASTM F1472, ASTM F1713, ASTM B348, ASTM B381, ISO 5832-2, ISO 5832-3 Production status and manufacturing process of titanium alloy rod: Production state: hot processing state (R), cold processing state (Y), return state (M) Manufacturing process: hot forging, hot rolling, cold rolling, annealing, pickling Titanium alloy rod shape: Titanium round bar, titanium square bar, titanium hexagon bar Forging rod, rolling rod, drawing rod Surface of titanium alloy rod: Surface:Hot rolled black surface, Machined surface, polished surface (H11, H9, H8) Packing: Export wooden case packing or according to customer's request
High pure Gr1 Gr2 Gr3 Gr5 Gr9 Gr12 titanium plate/sheet 1. Titanium is a kind of rare nonferrous metal. Its density is 4.5g/cm3, it is just 60% of steel. So,it is very lighter than most other metals. We can use it to make high strength, good rigidity and light quality products. 2. It is also well-known as its high strength. It is able to work in the heat of 450-500â?? continuously. 3. Excellent corrosion resistance:it can work in the wet air,sea water,strong acid and strong alkali. 4. Non magnetic nature:as it is a sort of Non magnetic metal, it cannot be magnetized easily. And its nontoxic nature,a very good compatibility with human tissue and blood. So,it is widely adopted in the field of Medical Science. Titanium plate: 1. Product name: Titanium Sheet 2. Material: GR1, GR2, GR3, GR4, GR5, GR7, GR9, GR12-GR29, Ti11Cr-13v-3Al 3. Standard:ASTM B265,AMS4902,AMS4911,MIL-T-9047G,MIL-T-9046J 4. Specification:T:0.025-80mm W:200-2800mm L:10-4500mm 5. Brand: EnergyTi 6. Origin:Baoji, Shaanxi, China 7. MOQ:10kilogram Quality Control: Our products will be 100% checked and inspected by our QC before packing and shipment. ISO 9001:2018 certificate Quality Inspection: 1. Chemical analysis and Physical Properties test conducted by Bao Ti Group Test center 2. 100% ultrasonic test(UT) 3. Inspect if the surface of the material is contaminated. Features: 1. low density 2. good corrosion resistance property , rustless. 3. non magnetic nature 4. superior quality 5. fast delivery 6. reasonable price Application: Chemical industry, Petrochemical Industry, electrical power industry, military industry, health care industry,Ocean environmental protection, motor vehicle industry, bicycle industry, corrosive environment etc.
High pure Gr1 Gr2 Gr3 Gr5 Gr9 Gr12 titanium plate/sheet 1. Titanium is a kind of rare nonferrous metal. Its density is 4.5g/cm3, it is just 60% of steel. So,it is very lighter than most other metals. We can use it to make high strength, good rigidity and light quality products. 2. It is also well-known as its high strength. It is able to work in the heat of 450-500 continuously. 3. Excellent corrosion resistance:it can work in the wet air,sea water,strong acid and strong alkali. 4. Non magnetic nature:as it is a sort of Non magnetic metal, it cannot be magnetized easily. And its nontoxic nature,a very good compatibility with human tissue and blood. So,it is widely adopted in the field of Medical Science. Titanium plate: 1. Product name: Titanium Sheet 2. Material: GR1, GR2, GR3, GR4, GR5, GR7, GR9, GR12-GR29, Ti11Cr-13v-3Al 3. Standard:ASTM B265,AMS4902,AMS4911,MIL-T-9047G,MIL-T-9046J 4. Specification:T:0.025-80mm W:200-2800mm L:10-4500mm 5. Brand: EnergyTi 6. Origin:Baoji, Shaanxi, China 7. MOQ:10kilogram Quality Control: Our products will be 100% checked and inspected by our QC before packing and shipment. ISO 9001:2018 certificate Quality Inspection: 1. Chemical analysis and Physical Properties test conducted by Bao Ti Group Test center 2. 100% ultrasonic test(UT) 3. Inspect if the surface of the material is contaminated. Features: 1. low density 2. good corrosion resistance property , rustless. 3. non magnetic nature 4. superior quality 5. fast delivery 6. reasonable price Application: Chemical industry, Petrochemical Industry, electrical power industry, military industry, health care industry,Ocean environmental protection, motor vehicle industry, bicycle industry, corrosive environment etc.
Baoji Titanium Wire Industry Co., Ltd, an ISO 9001 & AS 9100D approved company, we are specialized in titanium alloy wire, bar, forging parts with ASTM, AMS & AWS classification. Currently our products serve the clients in aerospace, medical, industrial fields etc. Grades: CP Titanium: Grade 1, 2, 3, 4, 7 (Ti 0.2Pd), 12 (Ti 0.3Mo0.8Ni) Titanium Alloys: Grade 5 (Ti 6Al4V), Grade 23 (Ti 6Al4V ELI), Grade 9 (Ti 3Al2.5V) Diameter: Wire: 0.8 - 4.0 mm Bar: 3.0 - 114.30 mm The feature of our titanium wire: - High surface quality - Stability of quality characteristics - Lower impurity content
We Titubes stock and supply titanium tubes rings bars and sheets since 2010. Now we're producing the special Huge Gr.2 Titanium Seamless tubes which can be reached as O.D600*W.T5*L4000mm according ASTM B338. It's Seamless and Huge.
We Titubes stock and supply titanium tubes rings bars and sheets since 2010. Now we're producing the special Huge Gr.2 Titanium Seamless tubes which can be reached as O.D600*W.T5*L4000mm according ASTM B338. It's Seamless and Huge.
We Titubes stock and supply titanium tubes rings bars and sheets since 2010. Now we're producing the special Huge Gr.2 Titanium Seamless tubes which can be reached as O.D600*W.T5*L4000mm according ASTM B338. It's Seamless and Huge.
We Titubes stock and supply titanium tubes rings bars and sheets since 2010. Now we're producing the special Huge Gr.2 Titanium Seamless tubes which can be reached as O.D600*W.T5*L4000mm according ASTM B338. It's Seamless and Huge.
Titanium Grade 5 is the aerospace grade and is not cold formableï¼? so it is used more often when no forming is needed. Grade 5 alloy will have ultimate tensile strength at and above 895 Mpa. 2. Plate is often used with the goal to get really close to the final dimensions of the part being made. The material is worked to the closest size of the desired part and the grain structure of the finished piece is more homogenous. Titanium sheet is often used as a heat barrier because titanium stops the heat and does not transfer to the rest of the assembly. Titanium plate and sheet have ballistic properties making it great for driver protection in racing. 3. Applications of product Oil drilling equipments Industrial precision instruments standard parts Medical instruments standard parts Aircraft engine Machineryï¼? electroplating equipment Titanium wind leaf in power used
Titanium Grade 5 is the aerospace grade and is not cold formableï¼? so it is used more often when no forming is needed. Grade 5 alloy will have ultimate tensile strength at and above 895 Mpa. 2. Plate is often used with the goal to get really close to the final dimensions of the part being made. The material is worked to the closest size of the desired part and the grain structure of the finished piece is more homogenous. Titanium sheet is often used as a heat barrier because titanium stops the heat and does not transfer to the rest of the assembly. Titanium plate and sheet have ballistic properties making it great for driver protection in racing. 3. Applications of product , Oil drilling equipments , Industrial precision instruments standard parts , Medical instruments standard parts , Aircraft engine , Machineryï¼? electroplating equipment , Titanium wind leaf in power used
Granule 1~3mm Dark tan 99.9% 3~5mm Crystal granule 1~3mm Dark purple 3~5mm Tablet Φ9x5mm Dark tan Φ10x10mm
Granule 1~3mm 99.9% 3~6mm
Specification :1.0mm, 2.0mm, 3.2mm, 4.2mm, 5.2mm, 6.2mm Brand :TC4/GR5, TC4ELI/GR5ELI, TA3/GR3 Treatment: nondestructive testing, leveling and finishing to finished plate. Physical properties: the tensile strength of TC4 medical titanium alloy plate is 980-1020mpa, the yield value is 950-1000mpa, the elongation after fracture is 20%, and the high-fold structure is a1-a5. TC4/GR5 titanium alloy composition: Nominal chemical composition (ti-6al-4v) Ti Al (5.5 6.7); V (3.5 4.5); Fe: 0.3; C: 0.08; N: 0.05; H: 0.01; O: 0.2 Nominal chemical composition (ti-6al-4v) ELI Ti Al (5.5 6.5); V (3.5 4.5); Fe: 0.3; C: 0.08; N: 0.03; H: 0.01; O: 0.13
Element Symbol: Ti Purity: 3N, 4N, 4N5, 5N Availble Shape: Planar target, Rotary target
Grade5 titanium bolts , also named TI6AL4V titanium bolts, the content of AL is 5.5-6.5% and the content of V is 3.5-4.5%, is currently the largest and most widely used titanium bolts in titanium alloy. Its specifications as follows: Brand name: WIT Test report: MA SGS, etc Feature: 1.Grade 5 titanium bolts (TI6AL4V titanium bolts) is lower ductility and higher hardness than CP titanium , which is not easy to be processed. 2. the content of titanium is about 89%, is lower pure than CP titanium , better corrosion resistance 3. High Strength and mechanical properties, wear resistance 4. Non-toxic, non-magnetic, no radiation, good biocompatibility. 5. offen used in the aerospace or tough environment.
Place of Origin:Shaanxi, China Model Number:ASTM B348 Application:Industrial Shape:Round Length:MAX:12000mm Technique:Forged weight:Actual Weight Key Words:grade 5 titanium round bar with stock Product Name:grade 5 titanium round bar 1. For producing electric light source parts and electric vacuum components. 2. For producing heating elements and refractory parts in high temperature furnaces. 3. For producing medical laboratory equipment. 4. Used as electrodes in the field of rare earth industry. 5. Used in the manufacture of weapons. 6. Used to make decorations and etc.
