1. Pu 2. 2d~4d chrome+nylon armrest 3.Pp painting base 4.Butterfly mechanism with recline 5.100 mm gaslift class 2 6.Nylon castor
Polyester/Cotton corespun threads are produced by spinning the staple fibres of cotton and then wrapping this around continuous polyester filaments. Two or more plies of this standard yarn are doubled (twisted together) to make the sewing thread. The resultant thread provides superb strength from the polyester filament together with the characteristic soft feel of the cotton. It is presented in natural color, heat set (steam set) and in dye tubes ready for dyeing. Dyed finished with lubricated is available as customers required. Count: Ne8, 12, 16, 18, 20, 24, 28, 29, 30, 36, 40,45,50, 2ply and multiply.
Polyester/Cotton corespun threads are produced by spinning the staple fibres of cotton and then wrapping this around continuous polyester filaments. Two or more plies of this standard yarn are doubled (twisted together) to make the sewing thread. The resultant thread provides superb strength from the polyester filament together with the characteristic soft feel of the cotton. It is presented in natural cotton color, heat set (steam set) and in dye tubes ready for dyeing. finished on cones. The thread lubricant is retained well by the surface fibres which result in excellent sewing performance. The cotton offers good protection against needle heat. Yarn count: Ne8/2,3, 12/2,3 ; 16/2,3; 18/2,3; 20/2,3; 29/2,3; 36/2,3; 40/2,3; 45/2,3; 50/2,3;
Core Threads - are made by spinning a staple wrapper of polyester around a continuous filament of polyester fibers. Afterwards, two or more of these single yarns are twisted together to form the thread. It is presented in natural color, heat set (steam set) and in dye tubes ready for dyeing. Also, Dyed finished thread with lubrication is available as customized requested. Yarn count: Ne12/2, 12/3, 12/4, 12/5, 16/2, 16/3, 18/2, 18/3, 20/2, 20/3, 29/2, 29/3, 32/2, 32/3, 45/2, 48/2, 50/2, 53/3, 60/2 Packs: 1kg, 1.25kg, 1.5kg, 2kg, 3000M, 5000M, 500GR. 1KG/CONE or KING-SPOOL Also, we carry variety of Cotton-Poly core spun, HT Cf-Polyester & Nylon, Twisted Textured Polyester, PTFE, Para-Aramid and meta-aramid sewing thread, Cocoon Bobbins and Pre-wound bobbins, polyester and viscose embroidery thread, for more products
Chemical composition Elements Value Elements Value Copper Cu 99.97% min. Silica Si 0.3ppm max. Cobalt Co 0.2ppm max. Bismuth Bi 0.1ppm max. Lead Pb 0.2ppm max. Tellurium Te 0.05ppm max. Iron Fe 2ppm max. Silver Ag 10ppm max. Aluminum Al 0.5ppm max. Selenium Se 0.3ppm max. Manganese Mn 0.1ppm max. Sulphur S 4ppm max. Nickel Ni 0.2ppm max. Magnesium Mg 0.4ppm max. Antimony Sb 0.1ppm max. Oxygen O2 0 Arsenic As 0.1ppm max. - Usage:electric light industry, machinery manufacturing, building industry , defense industry, and other fields manufacturing industrial .Valves and fittings, instrument sliding bearing........... Chemical composition Elements Value Elements Value Copper Cu 99.97% min. Silica Si 0.3ppm max. Cobalt Co 0.2ppm max. Bismuth Bi 0.1ppm max. Lead Pb 0.2ppm max. Tellurium Te 0.05ppm max. Iron Fe 2ppm max. Silver Ag 10ppm max. Aluminum Al 0.5ppm max. Selenium Se 0.3ppm max. Manganese Mn 0.1ppm max. Sulphur S 4ppm max. Nickel Ni 0.2ppm max. Magnesium Mg 0.4ppm max. Antimony Sb 0.1ppm max. Oxygen O2 0 Arsenic As 0.1ppm max. - Usage:electric light industry, machinery manufacturing, building industry , defense industry, and other fields manufacturing industrial .Valves and fittings, instrument sliding bearing........…
Spun polyester threads are produced by spinning together of the high tenacity and low elongation polyester fibers 1.2Dx38mm Bright or Semi-Dull into a single ply. Two or more plies are twisted to make a thread of the desired size. the former has the feature of few knot. Reverse SZ twist, specifically twisted for sewing thread. It can also be used for embroidery, quilting, weaving and knitting. The thinnest counts can also be used for cocoon and mini bobbins. It is presented in raw white (grey yarn) or in dope dyed optical white yarn. It is heat set (steam set) for best stabilization of the yarn. It is presented in dye tubes, ready for dyeing. Very wide count range from thicker Ne 12/4 to thinner Ne 80/2 Package: Dyeing tube with 1.0kg, 1.25kg, 1.36kg, 1.4175kg, 1.89kg for raw white Plastic Cone with 1000-5000m or as cunstomers requested for finished thread
The product, which newly researched and developed, is the integrative high-tech measuring instrument for the transformation of CATV .The main function is to measure QAM digital signal and analogue signal. The measurable item includes: power measurement , MER measurement , BER measurement , constellation ,channel measurement, tilt measurement, scan measurement, spectrum measurement, carrier noise ratio measurement, and rail voltage measurement. Make the corresponding choice according to the different occasion. The inside process chip adopts the extensive integrated microprocessor which is special to the most advanced tester in the world at present. It has many characteristics such as: the complete function, the fast processing speed, the low static power consumption, small and the high dependability. The peripheral circuit uses its special integrated package design according to corresponding function. The appearance adopts the human mechanics principle, it can be held firmly by single-hand and operated.
The so-called cryogenic treatment is to use liquid nitrogen (-196 C) as a cooling medium to continue the cooling process of the quenched metal material to a temperature far below room temperature, which promotes the acquisition of residual austenite after conventional heat treatment. Further transformation to improve the performance of metal materials. After the cryogenic treatment of metal, the wear resistance, toughness and dimensional stability of metal workpieces can be significantly improved, and the service life of the workpiece is doubled. Measuring Cryogenic Treatment--Technical Application Cryogenic processing equipment is a new technology that places the workpiece to be processed in a specific and controlled low-temperature environment, changes the microstructure of the material, and improves or improves the performance of the material. The temperature of cryogenic treatment is generally -100 C ~ -196 C. Due to the change of the microstructure of the treated material in a low temperature environment, the macroscopic performance is the surface hardness, impact toughness, wear resistance, dimensional stability, Improvements and improvements in strength, residual stress, etc. At present, our research on cryogenically treated materials involves: High-speed steel W9, W6, mold steel 3Cr13, carburized steel 20CrMnTi, high-chromium cast iron, high vanadium cast iron to improve the wear resistance of the workpiece and extend the service life; hard alloys such as aluminum alloys 2A11 and 2A12 to improve the dimensional stability of materials; Low temperature impact toughness of 42CrMo, 35CrMo.
The Signal Analysis Meter is a full-featured handheld signal performance meter providing a complete signal test system in easy-to-carry protective case. Signal Analysis Meter allows choice of 4 pre-programmed user-selectable band plans accessed via keypad entry for easy measurement of broadcast, CATV, CATV/HRC, and SUB/VHF channels. Direct-entry channel or frequency tuning selections provide maximum flexibility in head-ends and distribution networks that employ narrow digital signals or non-standard frequency applications. The meter displays instantaneous digital signal levels when testing digital carrier levels. The large LCD screen displays signal level as a bar-graph with digital numeric readout. This backlit display provides screen illumination in dimly lit work-spaces, allowing behind rack and night meter operation. Signal Analysis Meter enables testing of carrier-to-noise, multiple channels, and full, reduced, and single band scan for complete testing flexibility. The meterí»s functions include not only signal measurement when AC/DC voltage is present under test, but, when selected, voltage-level display. Full-channel operation 5-870MHZ Frequency Range 4-keypad channel plans (TV, CATV/STD,CATV/HRC,SUB/VHF) enable quick switching between sources Single keypad frequency or channel selection provides compatibility with channel, data, and other narrow bandwidth carriers Full spectrum-analyzer scan provides display of up to 100 channels simultaneously Carrier-to-noise testing provides accurate testing of system performance anywhere in the head-end or distribution system Large easy-to-read backlit Graphic LCD display provides quick-glance signal reference even in dimly lit work environments AC/DC voltage readings and compatibility allow measurements through input connector, enabling signal and voltage measurements when voltage is present in tested signal without costly adapters 8-Hour rechargeable NiMH batteries provide cost savings Automatic power shut-off feature extends time between recharges Bright orange high impact plastic housing and soft leatherette-vinyl protective case with belt clip included 8 pieces in one carton
YH-G1290 laser engraving cutting machine, customized to present market features, adopts advanced engineering idea and international universal design method on the premise of promoting client's market competition by reducing production cost, saving raw material, and increasing productive efficiency. There are 6 liner guide rails in the balance moving system, and step motor equips lower speed components which keep the machine work with high precision. It supports various file formats such as plt, bmp (1bit), dxf, ai etc. And it is able to engrave various graph and word. Technical parameter: Laser type: co2 glass laser tube Laser power: 60w / 80w / 110w Engraving area: 1200x900mm Cutting area: 1200x900mm Appearance size: 1740x1490x940mm Engraving speed: 0 - 350mm/s Cutting speed: 0 - 300mm/s Cutting thickness: 0 - 20mm Positioning precision: plus or minus0.01mm Characters: 1.0mm english letter Format support: ai, bmp, plt, dxf, dst etc Power supply: ac220vplus or minus5% / 50hz - 60hz Product feature: 1. This is our latest product, which we produce to reduce the cost for client. 2. Professional design ideal, customize for the user of different industries with elegant appearance and nice practicality. 3. Professional moving control design, adopt imported motor of high power and high-quality transmission system with high speed and precision. 4. Complete function, safe and stable, unique waterless alarm and automatic protection system which protect the working life of the laser tube effectively. 5. The power control system has unique automatic protection equipment to ensure the stability and safety of the machine in greatest degree. Size of packing: 194x170x130cm G.W.: 420kgs Packing: plywood
Welcome to contact us for our capillary tube mats. Sinolanc is the verified manufacturer which the largest capillary tube mats supplier We are presenting multinational marketplace with economic high quality and fast delivery. We use only high quality polypropylene granules and modern German automatic intelligent manufacturing equipment in its production process.
Alloy Indefinite Chilled is cast iron with fine inter-crystalline graphite evenly distributed throughout the working layer of roll barrel.The sizes, shapes and distributions of graphite and carbide are controlled by the chilling effect and the contents of alloy elements.The addition of alloy elements such as Mg,Ni,Cr,and Mo changes the matrix from pearlite and bainite to martensite. Plus the present of small amount of fine graphite, the performance of spalling resistance, thermal crack resistance and wear resistance were enhanced significantly. The material has small hardness gradient in the working layer of roll barrel and is suitable for intermediate and finishing stands for bar,wire and section mills.
Features: High melting point, Low penetration, Low viscosity Applications: Printing Ink and coating, Applied in Hot melt adhesives short setting time, Bitumen modification, PVC and rubber processing, Master-batch, PVC Stabilizer, Road Marking Paint HSFT-105G has a higher melting point and the lower penetration. HSFT-105G is suitable to be used in road marking paints. Presently, the thermoplastic traffic marking paint is the most widely used on the roads as the autonomous vehicle guidance. It is generally composed of thermoplastic resin, pigments, and fillers. The addition of HSFT-105G can improve the dispersibility of pigment and filler in thermoplastic resin, and improve paint fluidity, prevent sedimentation, adjust viscosity, improved wear and stain resistance. PACKING :25 KG Valve bag / 980KG Jumbo bag Properties Unit Specification Solidifying point 100-109 Drop point 110-119 Viscosity mm2/s at120 18-35 Penetration 0.1mm/100g 5s at 25 Max.2 Oil content % wt Max.0.2 Size,16mesh - 85%
Product Description: since our company is foreign-oriented, we accept different kinds of transaction currency codes such as US Dollar, Australian Dollar, pound, Euro and so on. This measurement in our company is to cater to customers around the world. So you need not to worry about the inconveniences existing in transaction between us. On a separate note, the exchange rate fluctuates from time to time, so you should pay close attention to the exchange rate in case of additional loss before paying for orders. Of course, we can negotiate all the details, we are considerate and friendly for our customers. Product Feature: We have a variety of steel pipe production lines: 12 galvanized steel pipe production lines; 6 hot-rolled pipe production lines. All the operation are controlled by computer automation and other advanced equipment. Meanwhile, our production process strictly conforms with the quality management system of ISO9001. At present our company is planning to build another new plant, committed to further expand the scale of production and processing, in order to better service more potential customers in the long run. Product Specification/Models: product range:16mm-219mm,WT:0.6mm-3.0mm Application: trade methods in our company range over FOB, CFR,CIF and so on. That is to say you have multiple choices on the basis of your practical situations. The term of FOB refer to free on board, you can designate vessels which you have confidence in. If you choose CFR method, you should assume the freight on the basis of FOB. Speaking of CIF, you need to pay for insurance on the premise of CIF. You can choose the most convenient method in the interest of you before placing an order. By the way, we hope you can pore through all the trade methods to pay a solid foundation on the business relationship.
Product Description: it is well known that different customers are in demand for different types of products. So our foreign trade team can handle various requirements flexibly. For example, we can modulate angular dimension called R angle to meet special request. In order to adjust the dimension, our factory is equipped with exclusive tool that is slitter which can regulate the width of raw materials. This equipment is customized for the customers who have detailed demands for R angle and we are always standing on the position of our customers. That in first place come customer interests is our tenet from the beginning of our business. Product Feature: We have a variety of steel pipe production lines: 12 galvanized steel pipe production lines; 6 hot-rolled pipe production lines. All the operation are controlled by computer automation and other advanced equipment. Meanwhile, our production process strictly conforms with the quality management system of ISO9001. At present our company is planning to build another new plant, committed to further expand the scale of production and processing, in order to better service more potential customers in the long run. Product Specification/Models: product range:16mm-219mm,WT:0.6mm-3.0mm Application: we can offer a great variety of post processing services for your reference such as galvanizing, oiled, painted, powder coated as well as plastic-coated pipe. As steel pipe is widely used in different situations, further processing is necessary. For steel pipe with plain end that is in the rough, it can form threaded on both ends, one with socket, the other with cap by deep processing. There are some other steel pipe ends for use such as beveled, swaged end, enlarged end and flattened end as well. If you have more advice or details about further processing of steel pipe, we will exert great effort to meet you.
Product Description: our principal product is galvanized steel pipe which can adapt to different types of situations no matter wet or sunny spell. As we all know, there is a zinc layer on the surface of galvanized steel pipe. For the layer of zinc, our company can customize it according to your requests. So before purchasing steel pipes, you should assess the environment of your project. For pre galvanized steel pipe, it is prevail in arid zones with little rain. While in hot and humid environment, hot dip galvanized steel pipe take more advantage over pre galvanized steel pipe. All in all, we are meticulous about zinc layer. Product Feature: We have a variety of steel pipe production lines: 12 galvanized steel pipe production lines; 6 hot-rolled pipe production lines. All the operation are controlled by computer automation and other advanced equipment. Meanwhile, our production process strictly conforms with the quality management system of ISO9001. At present our company is planning to build another new plant, committed to further expand the scale of production and processing, in order to better service more potential customers in the long run. Product Specification/Models: product range:16mm-219mm,WT:0.6mm-3.0mm Application: for consigning and packing, we are always taking it into serious consideration. During the process of packing, we load products with great careful in order to prevent steel pipes from scratching. We put customers' interests on the first place, so we adopt special packing methods such as inserting small pipes into large pipes with a determination to reduce space occupation. With smaller occupation of container space, the cost of consigning is reduced which is in accordance with the interest of customers. You can also put forward other requirements about packing or consigning. Other Information: Contact us: enquiry@fwssteel.com Tel/Whatsapp: +8613388081802 Payment: T/T L/C
Product description: Our team excels in grasping opportunities to expand our business scope including attending exhibition about 5-6 times home and abroad. Through different kinds of fairs, we can communicate with our customers face to face contributing to overall and comprehensive understanding about our company as well as our representative products. For example, big 5 fair in middle east, building materials exhibition in vietnam. Of course, the prevailing exhibition as to domestic fair is guangzhou export commodities fair, held twice a year. It can bring chinese producers under spotlight in worldwide marketing as well as linking buyers to suppliers. Besides, it can also assure world customers of the broadest selection of high quality products. Product feature: We have a variety of steel pipe production lines: 12 galvanized steel pipe production lines; 6 hot-rolled pipe production lines. All the operation are controlled by computer automation and other advanced equipment. Meanwhile, our production process strictly conforms with the quality management system of iso9001. At present our company is planning to build another new plant, committed to further expand the scale of production and processing, in order to better service more potential customers in the long run. Product specification/models: Product range:16mm-219mm, wt:0.6mm-3.0mm Application: For consigning and packing, we are always taking it into serious consideration. During the process of packing, we load products with great careful in order to prevent steel pipes from scratching. We put customers' interests on the first place, so we adopt special packing methods such as inserting small pipes into large pipes with a determination to reduce space occupation. With smaller occupation of container space, the cost of consigning is reduced which is in accordance with the interest of customers. You can also put forward other requirements about packing or consigning.
Product Description: it is well known that different customers are in demand for different types of products. So our foreign trade team can handle various requirements flexibly. For example, we can modulate angular dimension called R angle to meet special request. In order to adjust the dimension, our factory is equipped with exclusive tool that is slitter which can regulate the width of raw materials. This equipment is customized for the customers who have detailed demands for R angle and we are always standing on the position of our customers. That in first place come customer interests is our tenet from the beginning of our business. Product Feature: We have a variety of steel pipe production lines: 12 galvanized steel pipe production lines; 6 hot-rolled pipe production lines. All the operation are controlled by computer automation and other advanced equipment. Meanwhile, our production process strictly conforms with the quality management system of ISO9001. At present our company is planning to build another new plant, committed to further expand the scale of production and processing, in order to better service more potential customers in the long run. Product Specification/Models: product range:16mm-219mm,WT:0.6mm-3.0mm Application: for consigning and packing, we are always taking it into serious consideration. During the process of packing, we load products with great careful in order to prevent steel pipes from scratching. We put customers' interests on the first place, so we adopt special packing methods such as inserting small pipes into large pipes with a determination to reduce space occupation. With smaller occupation of container space, the cost of consigning is reduced which is in accordance with the interest of customers. You can also put forward other requirements about packing or consigning.
Product Description: our team excels in grasping opportunities to expand our business scope including attending exhibition about 5-6 times home and abroad. Through different kinds of fairs, we can communicate with our customers face to face contributing to overall and comprehensive understanding about our company as well as our representative products. For example, Big 5 Fair in Middle East, Building Materials Exhibition in Vietnam. Of course, the prevailing exhibition as to domestic fair is Guangzhou Export Commodities Fair, held twice a year. It can bring Chinese producers under spotlight in worldwide marketing as well as linking buyers to suppliers. Besides, it can also assure world customers of the broadest selection of high quality products. Product Feature: We have a variety of steel pipe production lines: 12 galvanized steel pipe production lines; 6 hot-rolled pipe production lines. All the operation are controlled by computer automation and other advanced equipment. Meanwhile, our production process strictly conforms with the quality management system of ISO9001. At present our company is planning to build another new plant, committed to further expand the scale of production and processing, in order to better service more potential customers in the long run. Product Specification/Models: product range:16mm-219mm,WT:0.6mm-3.0mm Application: Our company is a large professional steel pipe manufacturer, located in Tianjin Daqiuzhuang, which is the largest welded steel pipe production base in the north of China. Our Group was founded in 2006. We have four subsidiary companies. Through years of further development, we have gained lots of strong competitive advantages in the steel market both at home and abroad. Our products can be exported to North America, South America, Europe, Middle East, Southeast Asia, Australia as well as other regions and lots of countries throughout the world. In addition, our annual output is up to 0.88 million tons. We can achieve an annual turnover of RMB 3.8 billion. We are able to offer various kinds of pipes, which all have a wide range of applications in the real life.
Product description: In mention of packing, we can offer a variety of methods for you to choose. Such is the fact , it is up to you about the number of steel pipes in a bundle. That is to say pieces of steel pipe are not fixed. Moreover, you can present your proposals about packing in order to make unloading easier. By the way, on the part of round steel pipe, the packing choice is limited. The bundle shape of round steel pipe is confined to hexagon, which is beneficial to loading and discharging products. In a word, we can negotiate all the details with you about packing and other matters. Product feature: We are able to offer much enough outer packing made of high quality pvc (at least additional 30 cm) to protect tubes against harsh environment or unexpected situations in the course of transportation. Anyway, our outer packing has very tight protection as well as strong waterproof effect. If you have special requirements of packaging, we are able to provide the proper packing as per specific type of pipe, to maximize the satisfaction of your various requirements. Product specification/models: Product range: 12.7*12.7-400*600, wt:0.5mm-16mm Application: Our warehouse is a kind of indoor installation which can prevent rain from eroding steel pipes. After production of steel pipe, we also have a indoor package so as to protect products without rain erosion. All these measures are taken into consideration in the interest of our customers. Under the harsh environment such as rainy or snowy, we can also handle our products including packing because all the activities with regard to steel pipes are processed indoor. So no matter what happened your order can be placed according to our original plan which can avoid a delayed delivery date.
