5052 aluminum sheet and coil have good workability, high fatigue strength and good weldability. It has very good corrosion resistance, especially in marine environments. 5052 aluminum sheet can be anodized to improve the corrosion resistance of the material in corrosive environments.
Alloy 5083 aluminum sheet have higher strength than 5052 plate and has exceptional thermal conductivity. In the tempered condition, it retains good formability due to excellent ductility. It is highly suitable for welding and can be hardened by cold work. Because Alloy 5083 exhibits excellent resistance to general corrosion, it is used in marine applications. Since alloy 5083 aluminum sheet is capable of withstanding extremely low temperatures without brittleness or loss of properties, it is especially suited to the cryogenic market.
3003 aluminum sheet and plate is approximately 20% stronger than 1100 series aluminum. 3003 aluminum reacts well to mechanical finishings as well as organic finishes. 3003 welding is readily accomplished by means of conventional welding methods, but may be gummy if machined. Soldering is limited to the torch method.
Alloy 6061 aluminum sheet and Plate are the most versatile of the heat treatable aluminum alloys. Though less strong than most of the 2xxx and 7xxx alloys, 6061 aluminum provides an extensive range of mechanical properties and corrosion resistance and can be fabricated by many of the commonly used practices. In the â??Oâ?� temper or annealed condition, alloy 6061 aluminum sheet has good formability. In the T4 condition, fairly severe forming can be done; whereas, in the T6 condition, properties may be obtained by artificial aging.
Alloy 5086 aluminum sheet have even higher strength than 5052 or 5083 and its mechanical properties vary significantly with hardening and temperature. It is not strengthened by heat treatment; instead, it becomes stronger due to strain hardening or cold working of the material. This alloy can be readily welded, retaining most of its mechanical strength. The good results with welding and good corrosion properties in seawater make Alloy 5086 extremely popular in marine applications. 5086 aluminum sheet has been used in vehicle armor plate due to its high strength factor.
Water, gas and oil; construction and pilling, Low pressure fluid delivery, Oil drilling Out diameter: 21.3-660mm All kinds of surface Galvanized, 3PE, 3PP, Painting
Carbon Steel Sheet/Coil
Grade:dx51d+z Thickness:0.18-0.8 mm Place of orign: tianjinchina Brand:yongtai Modle number:cgcc Type:steel coil Technique:cold rolled Surface treatment:galvanized paint coated Application:construction, roofing and wall material, electronic equipment, furniture making etc. Width:800-1500 mm Moq:25 metric ton Length:as costomer's requirement Color:ral color Coil weight:3-8tons or as your request Zinc-coating:40-200g/m2 or as your request Key to success:advanced technique and service and low price Packaging:standard export seaworthy packing, according to customers' requirement Port of loading:tianjin Delivery time:7-30 days
Prepainted steel coils is produced by hdgi/hdgl substrate, with surface pretreatment(chemical degreasing and chemaical conversion treatment), applying one or several layers of organic coating on the surface, and then, baked and solidified. Product name: prepainted steel coils Thickness: 0.2-0.8mm Width: 914-1250mm Color: sea blue, grey white, winroad white ect, according to ral color code Main usage: construction, home applications, transportation, furniture etc Annual output: 300, 000 metric tons
Standard:API, ASTM, DIN, GB, API 5CT, API 5L, ASTM A53-2007, DIN 2444, GB/T 3091-2001, GB/T 9711.1-1997, GB/T 9711.2-1999, GB/T9711,SY/T5037,API 5L Grade:10#-45#, A53-A369, Q195-Q345, ST35-ST52, 10#, 20#, A53(A,B), Q195, Q235, Q345, St37, St37-2, St52 Thickness:6 - 25.4 mm Section Shape:Round Outer Diameter:219 - 2620 mm Place of Origin:Tianjin, China (Mainland) Secondary Or Not:Non-secondary Application:Chemical Fertilizer Pipe Technique:SAW, Double-sided spiral submerged arc welding Certification:API Surface Treatment:PE coated, oiled or as per your requests, oiled, galvanized Special Pipe:API Pipe Alloy Or Not:Non-alloy Product name:SSAW spiral steel pipe Length:12 Meters Brand Name:Ruijie samples:offer Factory or not:manufacturer End finished:bevelled Produce lines:4
Standard:API, ASTM, DIN, GB, JIS, API 5CT, API 5L, ASTM A106-2006, DIN EN 10216-1-2004, GB/T 9711.1-1997, JIS G3466 Grade:10#-45#, A53-A369, Q195-Q345, 10#, 20#, 45#, A53(A,B), Q195, Q215, Q235 Thickness:0.4 - 25 mm Section Shape:Square Outer Diameter:10*10-600*600mm Place of Origin:Tianjin, China (Mainland) Secondary Or Not:Non-secondary Application:Structure Pipe Technique:Hot Rolled Certification:API, BV, ISO, CE Surface Treatment:Galvanized Special Pipe:Thick Wall Pipe Alloy Or Not:Non-alloy Product name:Hot Dip Galvanized Square Steel Pipe Material:Q195-Q235 Length:5.8-12m Usage:Construction Surface:Galvanized or Black with Oiling Company type:Factory, manufacturer Main Market:southeast Asia, America, Canada, Europe
Standard:API, ASTM, BS, API 5CT, ASTM A53-2007, BS 1387 Grade:10#-45#, A53-A369, Q195-Q345, 10#, 20#, A53(A,B), Q195, Q235 Thickness:0.5 - 2.5 mm Section Shape:Round Outer Diameter:10 - 165 mm Place of Origin:Tianjin, China (Mainland) Secondary Or Not:Non-secondary Application:Fluid Pipe Technique:ERW Certification:SGS,ISO Surface Treatment:Galvanized Special Pipe:Thick Wall Pipe Alloy Or Not:Non-alloy Name:galvanized pipe Zinc Weight:40g,80g,100g,120g,270g,400g,500g technique:ERW Length:2-12m End Treatment:Plain End Brand:Ruijie
Standard:JIS Grade:SPCC Thickness:0.12MM-1.2MM Place of Origin:Tianjin, China (Mainland) Brand Name:Ruijie Model Number:0.12-2.0mm*600-1250mm Type:Steel Coil Technique:Cold Rolled Surface Treatment:Coated Application:Ship Plate Special Use:High-strength Steel Plate Width:600-1250mm Length:Requirement Product Name:ppgi sheet in coil Coil Weight:3-8 Tons front coating:15-20 microns back coating:5-10 microns Color:RAL Color Zinc Coating:40-275g/m2 Substrate steel-01:Glavalume Steel Sheet Substrate steel-02:Hot Dip Galvanzied Steel Substrate steel-03:Electic Galvanized steel sheet Substrate steel-04:SPCC
Standard:JIS Grade:SPCC Thickness:0.12MM-1.2MM Place of Origin:Tianjin, China (Mainland) Brand Name:Ruijie Model Number:0.12-2.0mm*600-1250mm Type:Steel Coil Technique:Cold Rolled Surface Treatment:Coated Application:Ship Plate Special Use:High-strength Steel Plate Width:600-1250mm Length:Requirement Product Name:ppgi sheet in coil Coil Weight:3-8 Tons front coating:15-20 microns back coating:5-10 microns Color:RAL Color Zinc Coating:40-275g/m2 Substrate steel-01:Glavalume Steel Sheet Substrate steel-02:Hot Dip Galvanzied Steel Substrate steel-03:Electic Galvanized steel sheet Substrate steel-04:SPCC
Alu-zinc coil width 1000 mmwidth 1200 mm Size length/ton length/ton Mm meters meters 0.20 637 531 0.21 607 506 0.22 580 480 0.23 554 462 0.24 530 442 0.25 510 425 0.26 490 410 0.27 472 393 0.28 455 380 0.29 440 366 0.30 425 354 0.32 398 332 0.35 365 305 0.37 344 287 0.40 318 265 0.42 303 253 0.45 283 236 0.47 271 226 0.50 255 212 0.55 232 193 0.60 212 177 0.70 182 152 0.80 160 133
Size: Od:1/2-8" (20mm-219mm) Wall thickness:0.5mm-10mm Length:less than 12m Steel material: Q195 grade b, ss330, sphc, s185 Q215 grade c, cs type b, ss330, sphc Q235 grade d, ss400, s235jr, s235jo, s235j2 Q345 ss500, st52 Usage: Used for structure, accessorize and construction Ends: 1) plain 2) beveled 3) thread with coupling or cap End protector: 1) plastic pipe cap 2) iron protector
10# 20# 45# 16mn q195 , s235jrh, p235tr1, q235 q345 a106, a53 etc 1.Outer dianeter:10.3mm-1219mm 2.Wall thickness:1.5mm-80mm 3.Length: max 12000mm Cold drawn , cold rolled, erw, saw, efw, lasw
Cold drawn and cold rolled O.D: 1/8" - 32" (inch) W.T: sch5s, sch10s, sch40s, sch80s, sch160s, etc. (0.5-40 mm) Or non-regular size to be tailored as required. Specific or at random as required, max 17 meters 200 (ni : 0.8%), 201b (ni : 3%), 201h (ni : 5%) 301 (ni : 6%), 304, tp304, tp304l/304l, 321, tp321, 316, tp316l, 316l, 31 317, 317l, 309s, 310s(2520), uns s31500/s31803/s32205/s32760, et
Api oil casing pipe, used oil well casing pipe, oil casing price Oil casing is used to support the oil and gas pipe well, in order to ensure the drilling Process and after completion normal operation of the wells. Each well depending on the depth of drilling and geological conditions, to use several layers of casing. After Cementing casing go down to use it and tubing, drill pipe is different, can not be reused, are disposable consumable materials. Therefore, the casing consumption of more than 70% of all the oil well pipe. Casing according to usage can be divided into: a catheter, surface casing, casing and production casing; Oil casing is a large-diameter pipe, played the role of fixed oil and gas wells, Or wellbore wall. Oil casing steel grade: h40, j55, k55, n80, l80, c90, t95, p110, q125, v150 and so On. End of the tube processing forms: short round thread, long round thread, buttress Thread, special deduction. Mainly used for oil well drilling support on the wall after Drilling and completion, and after completion to ensure the normal operation of the Entire drilling process wells
Outer diameter 10*20mm~250*300mm Length Common length 5.8m, 6m, 11.8m, 12m Less than 12m As customers' request Material Q195, q215, q235, ss400, a36, 20, 45, q345, 16mn, st52-3 Standard Gbt3094-2000, astm a500, jis g3466 Usage 1) shipbuilding 2) bridge structure 3) architecture construction Technique Erw Section shape Rectangular Surface Oil, black painting, threaded End protector 1) plastic pipe cap 2) iron protector Package Inner packing:caps at both ends, steel strong trips on every bundle Outer packing:pe wrapping outside Export standard packing(bundle with steel strip, steel pallet), shipped with 20' or 40' container Delivery 1) container 2) bulk carrier Port Xingang port, tianjin, china Date of delivery According to the quantity and specification of each order
