Overview: Concrete Scabbler is a machine which can chisel road to remove the ground raised part of the work surface to achieve uniformity of high quality roughness Effect, improve the pavement of concrete bond firmness .Itâ??s mainly applicable to the highway, railway bridge and box girder concrete surface. Application: For the highway, railway bridge and box girder concrete surface Feature: The Scabbler is made of high-quality tungsten steel alloy and wear-resistant. Long service life, high frequency Large work area per hour , the main body does not constitute a damage and has a super work ability
Cup-lock scaffolding system Cup-lock scaffolding system is a multi-purpose system scaffold, suitable for access and formwork support in all types of construction of building & civil engineering projects. Components: *cup-lock standard with spigots, cup-lock ledger, diagonal brace, intermediate transom Base jack, metal plank or catwalk Product feature: -simple. Components allow the easy creation of cantilevers, inside platforms and stair cases. -lighter. 20% lighter than coupler & pin scaffolding system -safe to erect and use Size Standard Length(m) Weight(kg) Self finish Painted Hot galv. L=0.50 2.42 2.5 2.57 L=1.00 4.84 4.98 5.13 L=1.30 6.54 6.74 6.93 L=1.50 7.25 7.47 7.69 L=1.80 8.96 9.22 9.49 L=2.00 9.67 9.96 10.25 L=2.30 11.37 11.71 12.05 L=2.50 12.08 12.44 12.81 L=3.00 14.5 14.93 15.37 Ledger Length(m) Weight(kg) Self finish Painted Hot galv. L=0.60 2.38 2.45 2.52 L=0.90 3.44 3.55 3.65 L=1.00 3.8 3.91 4.03 L=1.20 4.51 4.65 4.78 L=1.30 4.87 5.01 5.16 L=1.50 5.58 5.75 5.91 L=1.80 6.65 6.85 7.05 L=2.00 7.36 7.58 7.8 L=2.50 9.14 9.41 9.69 Intermediate transom Length(m) Weight(kg) Self finish Painted Hot galv. L=0.60 3.59 3.7 3.8 L=0.90 4.66 4.8 4.93 L=1.00 5.01 5.16 5.31 L=1.20 5.72 5.9 6.07 L=1.30 6.08 6.26 6.44 L=1.80 7.86 8.09 8.33 L=2.00 8.57 8.83 9.08 L=2.50 10.5 10.66 10.97 L=3.00 12.13 12.46 12.86
Adto ring-lock scaffolding system consists of hot dipped galvanized steel pie and modular components that are assembled together using integral wedge connectors. Adto ring-lock system is a modular scaffold system which can provide major saving in labor cost while meeting the demands for safety, ease of handling and reductions in maintenance. Components: Ring-lock standard with spigot, ring-lock ledger, ring-lock diagonal, wedge pin, base collar, steel plank, steel stair case. Feature: 1.Time efficient during assembly and dismantling 2.Safe and simple one-man assembly 3.No loose parts 4.Maintenance free Ringlock standard with spigot (48.3mm x 3.2mm, q345, hot dipped galvanized) Description Weight/ length Ring-lock standard 500mm 2.76kg Ring-lock standard 1000mm 5.18kg Ring-lock standard 1500mm 7.61kg Ring-lock standard 2000mm 10.03kg Ring-lock standard 2500mm 12.45kg Ring-lock standard 3000mm 14.87kg Ring-lock standard 4000mm 19.72kg Ringlock ledger (48.3mm x 3.0mm, q235, hot dipped galvanized) Description Weight/ length Ring-lock ledger 1000mm 4.62kg Ring-lock ledger 1500mm 6.50kg Ring-lock ledger 2000mm 8.38kg Ring-lock ledger 2500mm 10.27kg Ring-lock ledger 3000mm 12.16kg Ringlock diagonal (48.3mm x 3.2mm, q235, hot dipped galvanized) Description Weight/ length Ring-lock diagonal 1000x2000mm 10.06kg Ring-lock diagonal 1500x2000mm 10.95kg Ring-lock diagonal 2000x2000mm 12.13kg
Steel planks Steel planks is one of the most important products of adto. Adto steel plank is china top one steel board manufacturer. 80% of adto steel planks are for export and have gained high reputation over the world. Adto steel planks enjoys many advantages.Some are list as below: 1. Light weight, nice looking and high loading capacity; 2. Effective service life reaches 5 years, low investment but high returns; 3. Secondary resources recovery; 4. Galvanized surface, fire proof and anti-slide; 5. Rib reinforcement design to strengthen the plank’s loading capacity and ensure good drainage; 6. Patent holes design to reduce the planks weight; 7. Plain stiffeners, box type stiffeners and trapezoid stiffeners choice, meet different customers requirements. Item Size(mm) Thickness Length 210 210*45 1.0-2.0mm 0.5m-4.0m 225 225*38 1.0-2.0mm 0.5m-4.0m 240 240*45 1.0-2.0mm 0.5m-4.0m 250 250*50 1.0-2.0mm 0.5m-4.0m 230 230*65 1.0-2.0mm 0.5m-4.0m 225 225*38 1.0-2.0mm 0.5m-4.0m 300 300*50 1.0-2.0mm 0.5m-4.0m
Cuplock Scaffold is one of system scaffold,its standard is make up of 48.3*3.2mm steel tube and top cup,pressed bottom cup,and it finishing way is hot dip gal,but for ledger,it is make up of 48.3*3 .0mm steel tube and ledger balde welding on it,also hot dip gal finished; steel pallet
Ringlock scaffold is made of 48.3*3.2mm steel tube, and its finished way is hot dip galvanized, electro gal, painting, upon customer's requets.All of our products passed through ISO9001 certification and BS1139 and EN74. Steel pallet
Kwikstage scaffold is one of system scaffold, and there are three styles, they are uk style, south africa and australia style, different style will have different sizes and finishing ways, australia style 's standard is make of 48.3*4.0mm steel tube, they can be painting and hot dip gal, the material is q235 or q345, s355, and different customers will have different requirement, we can offer oem service, so anything interesting, Steel pallet
The inner tube is 48mm/40mm/56mm/60mm The outer tube is 60mm/56mm/76mm The thickness is 1.5mm/1.8mm/2.0mm/2.5mm/3.0mm The surface can be painted, galvanized or powder coating We can also make as you tailored The inner tube is 48mm/40mm/56mm/60mm The outer tube is 60mm/56mm/76mm The thickness is 1.5mm/1.8mm/2.0mm/2.5mm/3.0mm The surface can be painted, galvanized or powder coating We can also make as you tailored
Mail material: Q235 Q345 Surface treatment: HDG, powder coated, painting OEM service available Place of Origin: Tianjin, China in bulk
Mail material: Q235 Q345 Surface treatment: HDG, powder coated, painting OEM service available Place of Origin: Tianjin, China in bulk
Mail material: Q235 Q345 Surface treatment: HDG, powder coated, painting OEM service available Place of Origin: Tianjin, China in bulk
Mail material: q235 Surface treatment: hdg, powder coated, painting Oem service available Place of origin: tianjin, china In bulk
Mail material: q235 Surface treatment: hdg, powder coated, painting Oem service available Place of origin: tianjin, china In bulk
Mail material: q235 Surface treatment: hdg, powder coated, painting Oem service available Place of origin: tianjin, china In bulk
Scaffolding Tube Use: Scaffolding is a temporary structure used to support people and material in the construction or repair of buildings and other large structures. Material Storage Racks, Pallets, Hydraulic Platforms, Trusses, Columns, Purlins, Greenhouse, Stands Towers, Agricultural Equipment Standard: BS 1139, BS1387-1985, EN 39, EN10219, JIS G 3444 Steel Grade: Q195, Q215, Q235, Q345, S235JR, S275JR, STK400, STK500 Outer Diameter: 27mm, 38mm, 42mm, 48.3mm-48.6mm,50.8mm,60.3mm,63.5mm,76mm,etc... Wall Thickness: 2.0mm - 4.0mm Length: 5.8m ,6m, 6.4m,6.5m , 0.3-18m End: Square cut, Burr removed Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black Packing: Plastic plugs in both ends, Wrapped in waterproof paper or PVC sleeve, and sackcloth with several steel strips Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection. Mill Test Certificate: EN 10204/3.1B Coupler Double Coupler: Type: British, American, Germany Size: 48.3 x 48.3 Weight: 1.05 ? 1.48 KG Swivel Coupler: Type: British, American, Germany Size: 48.3 x 48.3 Weight: 1.25 ? 1.75 KG Standard: BS1139, EN 74 BS 1139 BS 1139 Standard Chemical Composition: % by mass, Maximum C Si P Ni S 0.20 0.30 0.050 0.009 0.050 Mechanical Properties: Yield strength, min (MPa) Tensil strength (MPa) Elongation in 2 in., min. % 235 340 - 480 24% BS 1137 BS 1137 Standard Chemical Composition: % by mass, Maximum C Si Mn P S 0.20 - 1.20 0.045 0.045 Mechanical Properties: Yield strength, min (MPa) Tensil strength (MPa) Elongation in 2 in., min. % 195 320-480 20%
Product Description 1.Dimensions:48.3-48.3mm 2.Material:Q235 carbon steel 3.Nut:21mm,22mm,23mm 4.T-bolt:80mm,89mm 5.Weight :0.95-1.05kg or as per your request 6.Standard:EN74,BS1139,CE and also fit for our domestic standard, through SGS test. 7.Techs:Drop Forged 8.Surface treatment:Self-color,Zinc plated ,Hot dip galvanized 9.Color:Self-color(Black) , White, Yellow 10.Style:British(also can produce German, American, Japanese and so on) 11.Quality:good bearing capacity,durable & stable 12.Price:reasonable & wonderful 13.OEM service is available.
1. Simple structures, simple erection; 2. High efficiency with strong loading capacity; 3. With galvanized surface(endurable); 4. Widely application in propping system such as construction, plants. Detail: Place of Origin: China (Mainland); Product type: thickness of scaffolding pipe; Lifespan: 5-7 years; Technology: auto welding; Production lead time: 10-30 days; Business type: manufacturer; Packing: in bulk, in bundle, in pallet; OEM service: available. Packaging & Delivery: Packaging Details:in bulk, in bundle, in pallet or as your request Delivery Detail:one week after order confirmation
1. Safety and durableScaffolding 2. Higher quality & strength 3. Used with scaffolding system 4. Stable and safe 5. Multi-function in different status,suitable for wide variety of uses 6. Optional accessories for your select 7. EN131 approved 8. 4folds*3steps, 4folds*4steps, 4folds*5steps available. Product Details Place of Origin: Tianjin China; Normal size: 450*1928*1955*2667mm; Material Standard: Q235; Surface Treatment:hot dipped galvanized, painted, pre-galvanized; Packaging Detail: steel pallet, packed in bundle; Delivery Detail: 10-20 days after deposit; Other Components: ledger, standard, diagonal catwalk, jack base
Product Description: we produce welded steel pipe. The weld line can be controlled with our precision instrument in the fitting place. For rectangular steel pipe, the weld line will exist in small sides in order to stand heavy weight. Customers who request factories produce rectangular steel pipes with weld line in small sides may have a project for steel doors or windows. Because the surface of big sides may be not even if it has weld line, that is not beautiful. Of course, there are no special requirements for round steel pipes weld line. Our professional degree can be illustrated by weld line control. Product Feature: With reference to pre galvanized steel pipe, before the zinc repair in the welding, we will first set out to remove the welding slag, zinc oxide skin and burned out layer. Then we use the spray painting for the repair of the zinc layer. We have the zinc repair in the welding close to the whole weld body in color, as a result of little color difference. Our finished galvanized pipe looks like much nature itself without blemish . Product Specification/Models: product range: 12.7*12.7-400*600,WT:0.5mm-16mm Application: for consigning and packing, we are always taking it into serious consideration. During the process of packing, we load products with great careful in order to prevent steel pipes from scratching. We put customers' interests on the first place, so we adopt special packing methods such as inserting small pipes into large pipes with a determination to reduce space occupation. With smaller occupation of container space, the cost of consigning is reduced which is in accordance with the interest of customers. You can also put forward other requirements about packing or consigning. Other Information:
Product description: In mention of packing, we can offer a variety of methods for you to choose. Such is the fact , it is up to you about the number of steel pipes in a bundle. That is to say pieces of steel pipe are not fixed. Moreover, you can present your proposals about packing in order to make unloading easier. By the way, on the part of round steel pipe, the packing choice is limited. The bundle shape of round steel pipe is confined to hexagon, which is beneficial to loading and discharging products. In a word, we can negotiate all the details with you about packing and other matters. Product feature: We are able to offer much enough outer packing made of high quality pvc (at least additional 30 cm) to protect tubes against harsh environment or unexpected situations in the course of transportation. Anyway, our outer packing has very tight protection as well as strong waterproof effect. If you have special requirements of packaging, we are able to provide the proper packing as per specific type of pipe, to maximize the satisfaction of your various requirements. Product specification/models: Product range: 12.7*12.7-400*600, wt:0.5mm-16mm Application: Our warehouse is a kind of indoor installation which can prevent rain from eroding steel pipes. After production of steel pipe, we also have a indoor package so as to protect products without rain erosion. All these measures are taken into consideration in the interest of our customers. Under the harsh environment such as rainy or snowy, we can also handle our products including packing because all the activities with regard to steel pipes are processed indoor. So no matter what happened your order can be placed according to our original plan which can avoid a delayed delivery date.
