Strong dirt resistance; Easy application Rapid drying speed, 12000 times for scrub resistance. Method * surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. * mix well before painting, plus proper clean water for diluting and mix well. * stop application when temperature is below 8 celsius * proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). * application tools: brush, roller, and spray *consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index This product conforms to china national mandatory standard:gb/t9756-2001 *appearance: white viscous liquid *solvent type: water-base *color: white * gloss: matt *to touch: 0.5-1 hours *viscosity: 100 ku *solid content:53% *voc: ín47 g/l 1l drum; 5l drum; 18l drum
Waterborne assist non-odour. Super dirt resistance, Water resistance and breathe freely, Non-yellowing, Outstanding hiding and adhesion, 50000 times for scrub resistance. Method Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. Mix well before painting, plus proper clean water for diluting and mix well. Stop application when temperature is below 8 celsius Proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). Application tools: brush, roller, and spray Consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index: This product conforms to china national mandatory standard:gb/t9756-2001 Appearance: white viscous liquid Solvent type: water-base Color: white Gloss: matt To touch: 0.5-1 hours Viscosity:100 ku Solid content:57% Voc: ín 47 g/l 1l drum; 5l drum; 18l drum
Full matt paint film, Excellent mildew resistance, algae resistance and health. Strong adherence performance Water resistance and breathe freely, Lasting light color, strong tarnish resistance, Outstanding hiding and coverage, smooth feeling, Easy application and rapid drying speed, 80000 times for scrub resistance. Method * surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. * mix well before painting, plus proper clean water for diluting and mix well. * stop application when temperature is below 8 celsius * proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). * application tools: brush, roller, and spray *consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index: This product conforms to china national mandatory standard:gb/t9756-2001 *appearance: white viscous liquid *solvent type: water-base *color: white * gloss: matt *to touch: 0.5-1 hours *viscosity:100 ku *solid content:59% *voc: ín47 g/l 1l drum; 5l drum; 18l drum
Series exterior Lifespan Feature Exterior paint series 1 2 years 1.Paint film smooth and solid 2.Good weather resistance 3.Water-resistent, alkali-resistent, scrub-resistenrt 4.Good coverage ability and economically Exterior paint series 3 3 years 1. Firm tensile tenacious, glossy 2. Anti-sunshine and anti watering 3. Strong adhesion 4. Strong coverage ability, anti-site, Exterior paint series 6 5 years 1. High glossy 2. Outstanding dirt resistance, alkali resistance, 3. Outstanding water resistance, alkali resistance, 4. Outstanding coverage ability and leveling property and easy application Exterior paint series 9 More than 8 years 1. Excellent light glossy 2. Excellent anti-dirt resistance 3. Strong weather resistance 4. Strong coverage ability and good levelling property 1l drum; 5l drum; 18l drum
Y post star-shaped pickets, features its three-pointed star shaped cross section. The tapered ends make it easy to be installed and the plain head is engineered for easy hammering the post into ground. Due to its high quality and stability, it is popular with most Australians, New Zealanders. 1. Material: low carbon steel , Q235 ,Q195, Q215 2. Surface Black / PVC-Coated/Hot dip galvanized/bituminous painted FAQ Q1: Are you manufacturer? A: Yes, our factory is located in tianjin. Q2: How to proceed an order ? A: Firstly let us know your requirements or application.Secondly We quote according to your requirements or our suggestions.Thirdly Customer confirms the samples and places deposit for formal order. Fourthly We arrange the production. Q3:Can I have a sample order ? A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable. Q4: Payment term and Delivery time a) TT b) LC AT SIGHT c) cash d) 30% contact value as deposit ,the blance 70% be paid after received the copy of B/L e) 15-20 days after received your depsit Q5:What is MOQ ? 1000 piece as MOQ , we can also produce sample for you. Q6: How to deal with the faulty? A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly, during the guarantee period, we will send new goods with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Excellent foam control. Improve wetting, leveling and flow. Resist Moisture. Impart slip and gloss. Help prevent pigment seperation. Suitable for use in industrial wood coatings, interior and exterior paints, inks and overprint varnishes.
Paint paddle Stir stick Wooden stake 12" 14" 21"
Chlorosulfonation Polyethylene Anticorrosive Finish Chlorosulfonated polyethylene anticorrosive paint is formulated with chlorosulfonated polyethylene resin, anti-corrosive and antirust pigments, fillers and additives. It has primer, intermediate paint and finish paint. The product is chemically inert, has good resistance to the atmosphere, moisture, salt, alkali, acids, oxidants and petroleum, has excellent outdoor weather resistance, and the coating film is tough and has excellent wear resistance. No need to remove the stubborn old coating during maintenance. This product is mainly used in petrochemical equipment, pipelines and other facilities that are corroded by the chemical atmosphere. It can also be used in storage tanks and other chemical equipment that are corroded by acid, alkali, and salt, and in facilities that require waterproofing such as reservoirs, water tanks, and sewage pools. Advantages OF Chlorosulfonation Polyethylene Anticorrosive Finish Excellent corrosion and weather resistance Good adhesion to all types of metal and cement Excellent water resistance Good acid, alkali and chemical resistance Specification of Chlorosulfonation Polyethylene Anticorrosive Finish Type Solvent Solid Content 41% Mixing Ratio two components Part A: Part B=10:1 by weight Dry Film Thickness 30m per coat Specific Gravity 1.16kg/Liter Coverage Rate (Theoretical) 0.11kg/m2/30m 0.104L/m2/30m Drying Time Temperature 5 10 20 30 Dry to touch 40mins 30mins 20mins Dry Hard 6hrs 5hrs 4hrs Package 22kgs for one kit, part A 20kgs, part B 2kgs What is chlorosulfonated polyethylene coating? The chlorosulfonated polyethylene antifouling coating has excellent chemical resistance and acid and alkali resistance. Its old paint film can be dissolved by the solvent in the new paint film. Therefore, it is not necessary to remove the stubborn old paint film during maintenance, which reduces the maintenance cost. It is commonly used in anti-corrosion in pharmaceutical and chemical plants. As a paints factory, we will do our best to meet all the needs of customers.
Fabric 100% polyester print Lining 100% polyester 290t Down bag: 100% polyester 300T Filling white duck down in weight 300g (80% down 20% feather) Front zipper 5# vislon zipper(YKK) dtm body Front hand pocket
1. Size: S, M, L, XL, XXL, XXXL 2. Materials: Nylon/Polyester/custom fabric 3. Feature: Breathable, Waterproof, Windproof 4. Color: Optional
1. Size: S, M, L, XL, XXL, XXXL 2. Materials: Nylon/Polyester/custom fabric 3. Feature: Breathable, Waterproof, Windproof 4. Color: Optional
Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:SGCC,DX51D-Z,DC51D-Z,SGHC Model Number:SGCC Type:Steel Coil Hot Rolled Special Use:High-strength Steel Plate Width:1000,1219,1250,1500 ECT, 600mm~1250mm Length:according to coil weight Product Name:Galvanized steel coil Material:SGCC,DX51D-Z,DC51D-Z,SGHC Shape:steel coil Zinc Coating:30-275g/m2 Coil ID:508/610mm Surface:Galvanized, Passivation or Chromated, Skin Pass,Oil or UnoiLCertificate: ISO 9001/SGS/BV Spangle:.minimum .Regular Big Spangle Usage:roofing sheet, PPGI base material
Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:DX51D Thickness:0.12MM-1.2MM, 0.12-1.2mm Model Number:0-2.0mm*600-1250mm Type:Steel Coil Technique:Cold Rolled Surface Treatment:Coated Application:building Special Use:Roofing Width:750-1250mm Length:Customers' Requirement Product Name:Color Coated PPGI Prepainted Galvanized Steel Coil for roofing Surface:Galvanized Coated Material:SGCC/CGCC/DX51D+Z Color:RAL Color Certificate:SGS Coil Weight:3-5 Tons Spangle:Big Medium Small Zero Zinc Coating:30-275g/m2 Package:Anti-water paper-steel sheet-steel strip
Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:SPCC-SD AND DX51D Model Number:0.35*1000mm Type:Steel Coil Technique:Hot Rolled Surface Treatment:Coated Application:roofing sheet,construction,Panel Special Use:High-strength Steel Plate Width:600-1250mm Length:coil Product Name:Prepainted Galvanized Steel Surface:galvanized and color coated Material:dx51d and spcc-sd Certificate:COC,PVOC,SASO,CIQ Zinc Coating:30-150G Packing:INSIDE WITH PLASTIC AND WATERPPOOFING PAPER OUTSIDE IS STEEL Hardness:65-90HRB Painting:: top:13-30micron back is 5-15 mircon Coil ID:508-610mm Coil Weight:3-5tons
Model Number:0.12-2mm*600-1500mm Type:Steel Plate/Coil Application:Building/Boiler/Container/Flange/Ship Plate Surface Treatment:Galvanized&Coated Width:600-1500mm Length:according customer's requirement Standard:AISI, ASTM, BS, DIN, GB, JIS Technique:Hot Rolled/Cold Rolled Grade:CGCC Special Use:High-strength Steel Plate Certificate:ISO 9001:2008/SGS/BV Delivery time:7-15 Days Coil Weight:3-5 Tons and custom Hardness:Soft-full Hard Quality:High Quality.SGS Inspection Color:RAL Colors and custom Zinc Coating:30-275g/m2 Price term:CIF CFR FOB EX-WORK
Model Number:0.12-2mm*600-1500mm Type:Steel Plate/Coil Application:Building/Boiler/Container/Flange/Ship Plate Surface Treatment:Galvanized&Coated Width:600-1500mm Length:according customer's requirement Standard:AISI, ASTM, BS, DIN, GB, JIS Technique:Hot Rolled/Cold Rolled Grade:CGCC Special Use:High-strength Steel Plate Certificate:ISO 9001:2008/SGS/BV Delivery time:7-15 Days Coil Weight:3-5 Tons and custom Hardness:Soft-full Hard Quality:High Quality.SGS Inspection Color:RAL Colors and custom Zinc Coating:30-275g/m2 Price term:CIF CFR FOB EX-WORK
Standard:AISI, ASTM, BS, DIN, GB, JIS, AISI,ASTM,BS,DIN,GB,JIS Grade:DX51D SGCC Model Number:0.2-0.6mm*600-1250mm Type:Steel Plate Technique:Cold Rolled, Cold rolled Surface Treatment:Coated Application: Plate, Construction Special Use:High-strength Steel Plate Width:1000mm-1250mm Length:Customer's Requirement Material:SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Surface:Coated Color:RAL Color Item:SPCC Carbon Steel Coils Shipment:Container or in bulk Payment:T/T or L/C Deliver time:15-30 days
Standard:AISI, ASTM, DIN, GB, JIS Grade:cold roll Type:Steel Coil Technique:Hot Rolled Surface Treatment::Color coated substrate, construction,home appliances, transportation. Special Use:High-strength Steel Plate Width:914-1250mm Length:203-4458M thickness:PPGI COILS width:762-1250mm Spangle:regular spangle Usage:construction, transporation. Material:SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Surface:Galvanized Coated Name:Galvanied Roof Steel Sheet Zinc Coating:30- 150 g/m2 Coil Weight:3-8 Tons Certificate:ISO 9001:2008/SGS/BV
Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:Q235 Model Number:galvanized steel coil Type:Steel Coil Technique:Cold Rolled Surface Treatment:Galvanized Application:Container Plate Special Use:-strength Steel Plate Width:600mm-1250mm Length:Custom's Request Product Name:galvanized steel coil Surface:galvanized coated Material:ASTM/AISI/SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345 Spangle:Big Medium Small Zero Shape:Flat.sheet Certificate:ISO9001 Coil Weight:4Tons MOQ:10 Tons Color:galvanized white Zinc Coating:30-275g/m2
Standard:AISI, ASTM, BS, DIN, GB, JIS Grade:SPCC Model Number:0.14mm-1.4mm*600mm-1250mm Type:Steel Coil Technique:Cold Rolled Surface Treatment:Color Coated Application:Container Plate, Roofing , Building Construction Special Use:Wear Resistant Steel Width:600mm-1250mm Length:Customized Product Name:Ral prepainted Galvanized Steel Coil Color coating:Top:5-20μm,Back:5-10μm Color:RAL Color Alu/Zinc coating:AZ30-150g/m2 or Z30-275g/m2 Surface:Normal / Wrinkled / Matt / Wooden /Stone/ Print Coil ID:508mm/610mm Delivery Term:FOB/CFR/CIF or customized Delivery time:15-35 Days Port of loading:Tianjin port/any port in China Keywords:Prepainted Steel Coil
