Soda ash light / dense 99.2% sodium bicarbonate caustic soda flakes 99% sodium sulphate anhydrous (ssa) 99% sodium sulphite flakes (ssf) 60% sodium metabisulphate hydrogen peroxide (h2o2) 50% formic acid 85% glacial acetic acid paraffin wax liquid paraffin (white oil) lp 100 menthol crystal fumed silica deg (di ethylene glycol) mono ethylene glycol (meg) poly ethylene glycol (peg), base oil 150n, bs 150, 600n bitumen 60/70 rpo (rubber process oil) lioh (lithium hydroxide) hco (hydrogenated castor oil) 12 hsa (hydroxy stearic acid) ferrous sulphate heptahydrate additive for lubricating oil aromatic chemicals.Exporting of chemicals & other products
Submersible sewage pump Technical parameter: Model: qwb, Discharge: 5 to 6000 m3/h (1.4-1666.7l/s) Lift head: 6 to 80 m (19.7- 262.5 feet) Max. Rotary speed: 2900 r/min Pump outlet diameter: 50-600mm (2-23.6 inch) Temperature: -5 to +50 deg. C Maximum system pressure:
This product is normal safe mine equipment. It is new type water drainage and supply equipment which is applied to the industry of coal, metallurgy, power, urban construction, running water and ground water development, etc. Discharge:240-1450m3/h Head:25-1000m Power:55-2400kw Voltage:380v 660v 3kv 6kv
This product is normal safe mine equipment. It is new type water drainage and supply equipment which is applied to the industry of coal, metallurgy, power, urban construction, running water and ground water development, etc. Discharge:240-1450m3/h Head:25-1000m Power:55-2400kw Voltage:380v 660v 3kv 6kv
Submersible sewage pump Technical parameter: Model: qwb, Discharge: 5 to 6000 m3/h (1.4-1666.7l/s) Lift head: 6 to 80 m (19.7- 262.5 feet) Max. Rotary speed: 2900 r/min Pump outlet diameter: 50-600mm (2-23.6 inch) Temperature: -5 to +50 deg. C Maximum system pressure:
Appropriate for pumping clear water or lightly contaminated water. Used to flood to flood control and drainage farmland irrigation, water supply projects, etc. Power: 22 to 500 kw Discharge: 500 to 20000 m3/h Head: 1.5 to 15 m (3.6- 54 feet) Pump outlet diameter: 350 to 1400mm (13.7 to 55.1 inch) Dia. Of impeller: 267 to 1540mm (10.5 to 60.6 inch) Rotate speed: 485 to 1450 r/min Angle of impeller installation: from -6 deg. To +6 deg. Ph value: 6, 9 Operating limits: Maximum ambient temperature 50 deg. C Motor: 1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor 2. Insulation grade: f 3. Protection grade: ip68 4. Double/triple mechanical sealing 5. Equipped with special control cabinet 6. Voltage: 380-10000v 7. Frequency: 50; 60hz Materials: 1. Pump body: cast iron 2. Impeller: stainless steel 3. Shaft with rotor: 45 steel Advantages: 1)the integration of pump body and motor without other assembly process 2)saving price 30 to 40% comparing with the ground sewage pump station with the civil and structural engineering. 3)lower noise and underground pump station. 4)easy, reliable and steady operation, realizing remote control. 5)greater weight for same bulk 6)completely meeting power standard by testing
Radial bearing and double-direction thrust bearing are installed in the sealing bearing cavity of the motor rotator with the impeller. The dynamic seals of the rotary bearing cavity adopt floating seals or mechanical seals to prevent water from entering into the bearing cavity. Nominal outlet diameter: 350-3200mm Head: 0-10m Flow rate: 0.4-25 m3/s Power:22-1500kw Voltage: 380v, 660v 3kv, 6kv, 10kv Water conditions: Water temperature=50 deg.C Ph value: 4-10 Water quality is mild sewage water. The equivalent diameter of allowed articles =1/10 of nominal outlet dia., and there is no plenty of fiber sundries.
Product description Ganquan brand submersible borehole pump Model: qjt, qj, qjg series, 800 sizes in total. Flow rate: 5-600 m3/h (1.4-166.7l/s) Head: 6 600 m (19.7- 1968.5 feet) Well diameter: 150-400mm (5.9 -15.7 inch) Max. Rotate speed: 3000 r/min Pump size: 6-14 inch Operating limits: 1, maximum ambient temperature: 20 degree c 2, maximum immerging depth: 70m (229.6 feet). Motor: 1. Rewindable motor 2. Voltage: 380v 3. Frequency: 50hz 4. Max. Power: 250kw. Materials: cast iron, stainless steel Application: * applied to farm irrigation, water supply for inhabitant, industrial and mine enterprise, etc. Advantages: 1) the performance and efficiency of our qjt series pumps is better than qj series with national standard: with multi-impellers for one pump body, its single stage head is 1/3-1/2 times taller than that of qj and the efficiency is 1-3% higher than that of qj. 2) with perfect design and proper structure, it has the advantages of lower noise, longer service life, smaller volume, high efficiency, energy-saving, easy and convenient installation and maintenance, etc 3) greater weight for same bulk 4) completely meeting power standard by testing 5) long service life: normally 4-5 years.
Model: 350qzb-1600qzb, 1000-1400qhb Power: 5.5-1500 kw Discharge: 116 -10689 l/s Head: 1.1-16.44 m (3.6- 54 feet) Pump outlet diameter: 350-1400mm (13.7-55.1 inch) Dia. Of impeller: 267-1540mm (10.5-60.6 inch) Rotate speed: 485-1450 r/min Angle of impeller installation: from -6 deg. To +6 deg. Ph value: 6-9
Radial bearing and double-direction thrust bearing are installed in the sealing bearing cavity of the motor rotator with the impeller. The dynamic seals of the rotary bearing cavity adopt floating seals or mechanical seals to prevent water from entering into the bearing cavity. Nominal outlet diameter: 350-3200mm Head: 0-10m Flow rate: 0.4-25 m3/s Power:22-1500kw Voltage: 380v, 660v 3kv, 6kv, 10kv Water conditions: Water temperature=50 deg.C Ph value: 4-10 Water quality is mild sewage water. The equivalent diameter of allowed articles =1/10 of nominal outlet dia., and there is no plenty of fiber sundries.
Appropriate for pumping clear water or lightly contaminated water. Used to flood to flood control and drainage farmland irrigation, water supply projects, etc. Power: 22 to 500 kw Discharge: 500 to 20000 m3/h Head: 1.5 to 15 m (3.6- 54 feet) Pump outlet diameter: 350 to 1400mm (13.7 to 55.1 inch) Dia. Of impeller: 267 to 1540mm (10.5 to 60.6 inch) Rotate speed: 485 to 1450 r/min Angle of impeller installation: from -6 deg. To +6 deg. Ph value: 6, 9 Operating limits: Maximum ambient temperature 50 deg. C Motor: 1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor 2. Insulation grade: f 3. Protection grade: ip68 4. Double/triple mechanical sealing 5. Equipped with special control cabinet 6. Voltage: 380-10000v 7. Frequency: 50; 60hz Materials: 1. Pump body: cast iron 2. Impeller: stainless steel 3. Shaft with rotor: 45 steel Advantages: 1)the integration of pump body and motor without other assembly process 2)saving price 30 to 40% comparing with the ground sewage pump station with the civil and structural engineering. 3)lower noise and underground pump station. 4)easy, reliable and steady operation, realizing remote control. 5)greater weight for same bulk 6)completely meeting power standard by testing
Model: 350qzb-1600qzb, 1000-1400qhb Power: 5.5-1500 kw Discharge: 116 -10689 l/s Head: 1.1-16.44 m (3.6- 54 feet) Pump outlet diameter: 350-1400mm (13.7-55.1 inch) Dia. Of impeller: 267-1540mm (10.5-60.6 inch) Rotate speed: 485-1450 r/min Angle of impeller installation: from -6 deg. To +6 deg. Ph value: 6-9
Radial bearing and double-direction thrust bearing are installed in the sealing bearing cavity of the motor rotator with the impeller. The dynamic seals of the rotary bearing cavity adopt floating seals or mechanical seals to prevent water from entering into the bearing cavity. Nominal outlet diameter: 350-3200mm Head: 0-10m Flow rate: 0.4-25 m3/s Power:22-1500kw Voltage: 380v, 660v 3kv, 6kv, 10kv Water conditions: Water temperature=50 deg.C Ph value: 4-10 Water quality is mild sewage water. The equivalent diameter of allowed articles =1/10 of nominal outlet dia., and there is no plenty of fiber sundries.
Product description Ganquan brand submersible borehole pump Model: qjt, qj, qjg series, 800 sizes in total. Flow rate: 5-600 m3/h (1.4-166.7l/s) Head: 6 600 m (19.7- 1968.5 feet) Well diameter: 150-400mm (5.9 -15.7 inch) Max. Rotate speed: 3000 r/min Pump size: 6-14 inch Operating limits: 1, maximum ambient temperature: 20 degree c 2, maximum immerging depth: 70m (229.6 feet). Motor: 1. Rewindable motor 2. Voltage: 380v 3. Frequency: 50hz 4. Max. Power: 250kw. Materials: cast iron, stainless steel Application: * applied to farm irrigation, water supply for inhabitant, industrial and mine enterprise, etc. Advantages: 1) the performance and efficiency of our qjt series pumps is better than qj series with national standard: with multi-impellers for one pump body, its single stage head is 1/3-1/2 times taller than that of qj and the efficiency is 1-3% higher than that of qj. 2) with perfect design and proper structure, it has the advantages of lower noise, longer service life, smaller volume, high efficiency, energy-saving, easy and convenient installation and maintenance, etc 3) greater weight for same bulk 4) completely meeting power standard by testing 5) long service life: normally 4-5 years.
Appropriate for pumping clear water or lightly contaminated water. Used to flood to flood control and drainage farmland irrigation, water supply projects, etc. Power: 22 to 500 kw Discharge: 500 to 20000 m3/h Head: 1.5 to 15 m (3.6- 54 feet) Pump outlet diameter: 350 to 1400mm (13.7 to 55.1 inch) Dia. Of impeller: 267 to 1540mm (10.5 to 60.6 inch) Rotate speed: 485 to 1450 r/min Angle of impeller installation: from -6 deg. To +6 deg. Ph value: 6, 9 Operating limits: Maximum ambient temperature 50 deg. C Motor: 1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor 2. Insulation grade: f 3. Protection grade: ip68 4. Double/triple mechanical sealing 5. Equipped with special control cabinet 6. Voltage: 380-10000v 7. Frequency: 50; 60hz Materials: 1. Pump body: cast iron 2. Impeller: stainless steel 3. Shaft with rotor: 45 steel Advantages: 1)the integration of pump body and motor without other assembly process 2)saving price 30 to 40% comparing with the ground sewage pump station with the civil and structural engineering. 3)lower noise and underground pump station. 4)easy, reliable and steady operation, realizing remote control. 5)greater weight for same bulk 6)completely meeting power standard by testing
Detailed product description Model: 350qzb-1600qzb, 1000-1400qhb Power: 5.5-1500 kw Discharge: 116 -10689 l/s Head: 1.1-16.44 m (3.6- 54 feet) Pump outlet diameter: 350-1400mm (13.7-55.1 inch) Dia. Of impeller: 267-1540mm (10.5-60.6 inch) Rotate speed: 485-1450 r/min Angle of impeller installation: from -6 deg. To +6 deg. Ph value: 6-9 Operating limits: Maximum ambient temperature 50¡ãc Motor: 1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor 2. Insulation grade: f 3. Protection grade: ip68 4. Double/triple mechanical sealing 5. Equipped with special control cabinet 6. Voltage: 380-10000v 7. Frequency: 50-60hz Materials: 1. Pump body: cast iron 2. Impeller: stainless steel 3. Shaft with rotor: #45 steel Application: * applied to farm irrigation and drainage, and water supply and drainage for industrial and mine enterprise, dock, civil project and power station, etc. Advantages: In wooden box
Detailed product description Model: qwb, qzb Discharge: 5 to 6000 m3/h (1.4-1666.7l/s) Lift head: 6 to 80 m (19.7- 262.5 feet) Max. Rotary speed: 2900 r/min Pump outlet diameter: 50-600mm (2-23.6 inch) Temperature: -5 to +50 deg. C Maximum system pressure:
High pressure pump.
Submersible borehole pump (deep well water pump) Material is cast iron and stainless steel, tin bronze. They are important equipment for deep well water-lifting. Used to lifting water and drainage farmland irrigation, water supply projects, etc. It is also used sea water. Products include 6 large series and over 800 sizes. Size: 6 inch ~12 inch Flow rate: 5~600m3/h Lift: 6~600m Power 3~250kw. Wooden case.
The products are important water-lifting equipments in projects of geothermal development and utilization. They are heat-resistant, anti-corrosion and aging-resistant. Its operating water temperature is 120¡æ, and has passed national ministerial level certification. The case of the electric heat-resistant submersible motor is made from stainless steel and the tin bronze materials. Products include 6 large series and over 800 sizes. Geothermal submersible borehole electric pump honorably wins the prize of scientific and technological innovation. China important new products certificate Size: 6 inch ~12 inch Flow rate: 5~600m3/h Lift: 6~600m Power 3~250kw. Wooden case.
