Adhesive tapes.
BOPP self adhesive tape.
PTFE Teflon Coated Fiberglass Cloth Without Release Paper Product Description PTFE cloth tapes are produced with either silicone or acrylic pressure sensitive adhesive system. The silicone adhesive coated products have a continuous operating temperature range between while the acrylic adhesive coated products provides high initial tack, enhanced solvent resistance and a continuous service temperature range of The PFTE coating provides optimal release, dimensional stability and outstanding heat resistance. PTFE cloth tapes have low friction and function well as electrical insulation. Bocheng PTFE Glass Cloth Futures: High temperature resistance Surface smooth, non-stick and easy to clean. Fire retardant. Excellent dimensional stability and high strength. High insulation, anti-ultraviolet, anti-static. Resistant to chemical corrosion, strong acid, alkali and various organic solvents. Easy to use, long service life. Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Common width for little tapes: 13mm 19mm 25mm 38mm 50mm, with color box, with opp bag For other width, customizaiton is available, but the waste should be taken into considertaion. Color: Brown, Black or White. Application of PTFE Adhesive Tapes High temperature roller coating, heating plate and de-moulding fixture. Food, medicine and plastic bag heat seal. Liner pasting for sliding chute, hopper and aviation mould, can also be applied in the cylinder of slurry machine, thermal plastic & de-moulding, and other industries, which is reusable and easy to replace. Applicable to other surface treatment which need to be resistant to adhesion, corrosion and high temperature. Used in packaging, thermoplastic, composite, heat sealing, electronic and electrical industries.
PTFE Adhesive Tapes PTFE Fiberglass Adhesive Tapes PTFE skived fim tape is another type of PTFE adhesive tapes, which is skived into even thin film from a cylindrical PTFE block. During the skiving, the block was fixed and rotate with a high speed, and the sharp blade will shave it into even thin film on a continuous basis. Product Description Color: Grey Popular Thickness: 0.13mm 0.18mm Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Process of PTFE skived film tapes� manufacturing: Once the PTFE film has been skived from the PTFE(Teflon) block, it will be chemically treated or etched, which will remove the fluorine surface by creating a new sodium surface. Then the heat resistant adhesive will be allowed to bond PTFE film, resulting in PTFE Skived Tapes. Difference of� PTFE skived film tapes: PTFE Skived film tape and self adhesive PTFE tape can both resist heat, has non stick surface and is chemical & UV resistant. But due to PTFE skived film is 100% Pure PTFE, so the property is different. The PTFE skived tapes is more thinner, usuall used for electronics industry, Application of PTFE skived film tapes: Its high elongation makes the tape useful in applications that require conformability. The combination of skived PTFE and silicone adhesive offers an effective solution in high temperature and high dielectric applications. Techbelts Skived PTFE tape provides superior wear resistance, low friction and a non-stick surface. Applications Areas of use include mechanical applications such as electrical insulation and cable wrapping, bellows and hose liners, gaskets, tank and vessel lining, slide bearings, skid ways, pipe support and bearing tape. They are also used in many other applications requiring high temperature resistance, low friction and a non stick surface. involved in the manufacture of PTFE coated fiberglass fabric, PTFE adhesive tapes, PTFE mesh conveyor belts, and silicone coated fabric etc, which provides a new solution for various industrial machines, such as packaging, printing, textile and dyeing industries.Click here to subscribe
6251 Polyimide tape is a general polyimide film that is coated or laminated on one or both sides with FEP Fluoropolymer, which imparts heat sealability, provides a moisture barrier, and enhances chemical resistance. 6251 Polyimide tape is recommended in applications that require a heat bondable film, or moisture and chemical resistance beyond the capabilities of uncoated polyimide film. Applications Tubing Heater circuits Heat sealable bags Automotive diaphragms and manifolds Electrical insulation Typical Properities NO. Item Index 1 Tensile Stength (MPa) 156 135 2 Elongation at Break 76 93 3 Striping Force Tape to Tape (N/25mm) 4 Tape to copper 4 4 Surface Resistivity 1.5 1015 5 Breakdown Strength (MV/m) 90 6 Volume Resistivity (m) 2.1 1014 7 Dielectric Constant 50Hz 2-3 8 Dissipation Factor 0.0012 Polyimide film FEP Series is polyimide film coated with FEP on one or both side, imparts heat sealability, provides a moisture barrier, and enhances chemical resistance. Mainly used in magnet wire insulation, formed coil insulation, CPTC and release liner. Type Polyimide film FEP Constructions In this series order code of three digits, the first and third digit represents the normal thickness of the coating FEP, the symbol 9 is used to represent 12.7um (0.5 mil) 6 to 2.54 um. HF is used to represent polyimide film coated with FEP on single side, and FHF to double side. Type FEP PI Film FEP Total um um um um HF019 25.4 12.7 38.1 HF019-B 30 10 40 HF019-C 40 10 50 HF011 25.4 25.4 50.8 HF021 50.8 25.4 76.2 FHF616 2.54 25.4 2.54 30.48 FHF616-B 3 25.4 3 31.4 FHF616-C 6.35 25.4 6.35 38.1 FHF919 12.7 25.4 12.7 50.8 FHF919-B 10 30 10 50 FHF919-C 10 40 10 60 FHF929 12.7 50.8 12.7 76.2 Thickness Tolerance % 10 Other size should be talked if we could produce.
PTFE joint sealant tape is made of PTFE, PTFE joint sealant tape has excellent acid and alkali resistance, high tensile strength and elasticity, PTFE joint sealant tape is especially suitable for using in food, beverage, bio-chemical and pharmaceutical industry equipment flange seal,
PRODUCT INTRODUCTION: 1.color:blue,grey 2.thickness:0.1 0.5 mm 3.work temperature:-40 260 4.thermal conductivity1.0 W/m.k 5.volume resistivity:1.5 10 12 .CM 6.specific gravity:1.79 1.81 g/cm3 7.breakdown voltage: 4 KV CHARACTERISTIC: 1.excellent resistance to heat (dry air), at +260 continuous and 260 intermittent.Remains flexible at low temperatures of 40 2.resistant to ultra-violet light, ozone and weathering processing,pharma ceutical and cosmetic manufacturing area. 3.good electrical insulation properties 4.keep constant even at high temperatures. 5.resistance to chemicals; moderate resistance to general chemical products. 6.high Temperature Thin Transparent.
Specification HTM Series is a flexible, high-performance, silica aerogel-based insulation material of limited combustibility used for exterior and interior applications. Description: HTM Series is a flexible, high-performance, silica aerogel-based insulation material of limited combustibility used for exterior and interior applications.� Supplied in a variety of finishes, the substantial layers of HTM Series meet the requirements for A2 classification (insulation, MgO and plasterboard, and anything you wanted).� The product is used to optimize the thermal performance and fire properties of faade systems in a number of ways. These include enhancing the thermal performance of the ventilated fade and addressing thermal bridging in the fade. HTM Series is also useful in minimizing thermal bridges around windows in areas such as window reveals and roller shutter cases.
Raw material: PP and pe Feature: Eco- friendly, non-toxic component, durable and good appearance. Color: red, green, yellow, orange, violet, blue ,etc.(as your requirment) Drawstring: with or without drawsting, as your requirement. Top:Heat cut or Hemmed Bottom:Single/Double folded, Single/Double sewed Packing: 2000pcs/bale, or customized Size: 30*60cm , 40*70cm, 50*80cm , 60*100cm
Introduction Double-sided tape is a roll-shaped tape made of paper, cloth, and plastic film as the base material, and then uniformly coating elastomer pressure-sensitive adhesive or resin pressure-sensitive adhesive on the above-mentioned base material.Double-sided tape is tape coated with adhesive on both sides, designed to stick two surfaces together.It can make objects fit perfectly without leaving any trace Usage The double-sided tape is suitable for all electronics, furniture, metal, automobile interior and exterior decoration, signs, nameplates, accessories, etc. Advantage 1.Easy to handle and cut. 2.Extensive applications 3.Good Initial Tack and easy for quick bonding 4. Solvent-free and environment-friendly Name Double-sided Tape Adhesive Acrylic Adhesive Type Pressure Sensitive Material Tissue Width 10mm-50mm Length 10-50m Thickness 60-140mic
Double sided butyl tape is developed for constuction& building industry, window industry and roof industry etc. The product is completely free of solvents, environmental friendly. With good adhesion character, it can be adapted to all kinds of surfaces and offer best sealing performance.The bead inside has good performace on preventing the sealant from squeezing out under big pressure.
Adhesive :Silicone Adhesive Side: Double Sided Adhesive Type: Water Activated Material: PE, Synthetic resin Feature: Waterproof Use: MASKING Product name:Nano suction tape Size: Customed Length:1M, 3 Meter, 5M or be custom Width:30mm,50mm or be custom Thickness:2mm Color:Transparent or be custom Certificates:CE,ROSH etc MOQ:300 Rolls
Hollyseal Double Sided PVC Foam Glazing Tape for Curtain Wall Hollyseal PVC Foam Glazing is a 300-500 kg/m3 density PVC foam which is coated both sides with high tack acrylic adhesive with blue filmic liner for easy release. It has an closed cell structure to allow curing of structural silicones on all sides of the joint.It is usually used to create a seal between a double glazed unit and the frame on both windows and doors. Product Features: 1.High shore hardness giving guaranteed joint thickness 2.Close-cell foam-seal out moisture and dust 3.Excellent resistance to weathering,oxidation and ultraviolet light 4.Compatible with most silicone sealants 5.Good peel strength and initial adhesion 6.PVC foam glazing tape is smooth on both sides without graininess 7.PVC foam glazing tape with a smooth surface finish 8.Compatible with all commercial silicone sealants used for structural glazing Technical informationï¼? Density:300-500 kg/m3 Shore 00 Hardness 55-90 Tensile Strength: 800KPa Elongation: 70% 180 Peel Strength:0.82N/mm 30% Compression set:7% Flammability:UL-94 HF-1/HBF/FMVSS 302(V0 can be customized) Typical application: 1.Spacer for two- and four- sided structural glazing systems 2.Residential and Commercial window glazing 3.Metal, wood, vinyl sliding window system 4.Commercial refrigeration glazing 5.Vibration Dampening 6.HVAC system
Bopp Tape.
Arious surface protection films: PE, PET, BOPP, CPP.Trade, manufacturer
BOPP film.Manufacturer
BOPP material carton sealing tape.
BOPP packing tapes.
Packaging materials like brown tape tear tape.
Bopp packing tape, masking tape, double side tape and other tapes.
