number:SS-COIL specifications:Thickness 0.025-4mm classification:Stainless steel coil introduce:Stainless steel coil material grade: 201, 202, 301,302,303,304,309S, 410S, 430, 316, 316L 1:Product description Standard: ASTM A240, JIS G4304, etc. Material grade: 200&300&400series Surface finish: 2B, BA, Mirror finished, N04, Hair Line, Matt finished, 6K, 8K Type 201 stainless steel is an austenitic chromium-nickel-manganese stainless alloy. It was developed mid century to conserve nickel and it is used as an alternative to type 301 in some tempered applications. Because of 201â??s relatively high yield strength in the annealed condition, use of 201 is limited. Type 201 is generally used in the tempered condition particularly for springs and fasteners. 201 Stainless will retain a comparable ductility to 301 even with the higher yield strength. Alloy 204CU is a chromium-magnesium austenitic stainless steel with an addition of 2-4% copper and nitrogen of 0.05-0.25%. Due to the addition of copper the alloy has better formability than 201 and 304. The copper improves corrosion and resistance to stress corrosion cracking in certain media. 204CU bridges the cost-property gap between 200 and 300 series stainless. Alloy 204CU is slightly after cold working but can be minimized. Type 301 is an austenitic stainless steel capable of attaining high strengths and ductility by cold working. It is not hardenable by heat treatment. Type 301 is non-magnetic in the annealed condition and becomes increasingly magnetic with cold working. It is preferable over types 302 and 304 in the tempered condition because the higher elongations (which are attainable at a given strength level) facilitate fabrication. Type 302 is not hardenable by heat treatment and in non-magnetic in the annealed condition. It becomes increasingly magnetic with cold working. If carbide precipitation is an issue 304 may be a better choice with its lower carbon content.
Specifications of Stainless Steel Tubes: 1. Standard: GB, ASTM, JIS, DIN 2. Grade: 201, 202, 301, 321, 304, 304L, 316, 316L, 409, etc 3. OD range: 2mm-1200mm 4. Wall thickness range: 0.06mm-200mm 5. Length: max.18000mm 6. Surface finish: Polishing (180#,220#,240#etc,)Hairline, acid pickled and so on 7. Manufacture technology: cold drawn/cold rolled/hot rolled 8. Type: Seamless & Welded Typical Steel Grade :Austenite, ferrite, marstenite, duplex stainless steel and alloy steel, nickel-based alloy, non-ferrous metallic tube and profiled bar, etc. Specifications Φ2�1200 mm * wt: 0.06�200 mm.
Product Details Pipe End: square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled, Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) Packing: Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps. Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Hardness Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, NDT TEST ( ET TEST, RT TEST, UT TEST)
The production of our seamless pipes is tightly regulated and all of the pipes we stock have been fully tested to international standards to ensure we only supply the highest quality products. Product Details: Pipe Standard: API 5L Steel pipe for pipeline transportation system ASTM A106 Seamless Carbon Steel for High Temperature Service JIS G3454,G3455,G3456 Carbon steel pipes DIN1629/EN10216-1 Seamless Tubes of Non Alloys Steels EN 10208 SEAMLESS STEEL PIPES FOR PIPELINE FOR FLUIDS Pipe End: square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled, Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) Packing: Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps. Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Hardness Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, NDT TEST ( ET TEST, UT TEST)
500 ml double wall sus 304 steel water tumbler with straw
steel bar bender, rebar bending machine, cheap price.
Annealed, normalized, normalized and tempered Inspections and tests performed Chemical composition inspection, mechanical properties test¡ê¡§tensile strength, yield strength, elongation, flaring, flattening, bending, hardness, impact t surface and dimension test, non-destructive test, hydrostatic test. Surface treatment Oil, varnish, passivation, phosphating, shot blasting Size range O.D 8-168.3mmw.T 1-15mm - Bundle packing , crate packing , customized
Model no.:tdx51d+az Surface treatment:coated Certification:iso Technique:hot dip galvalume Standard:astm, jis, din, bs Application:corrugated roof applied Edge:slit edge Stock:yes Steel grade:dx51d+az Brand name:cheeho & oem Base metal:dx51d+az Available dipped layers:50-150g/m2 Inner diameter:508mm Temper type:ca Available coating colors:off white & sea blue & others Approved certificate:sgs & iso & bv & tuv Export markets:global Hs code:72107000 Production capacity:150000mt/year Standard seaworthy package with wooden pallet
Model no.:tdc51d+z Surface treatment:coated Certification:iso Technique:hot dip galvanized Standard:astm, jis, din, bs Application:garage door used & sea blue & others Approved certificate:sgs & iso & bv & tuv Export markets:global Hs code:72107000 Production capacity:150000mt/year Standard seaworthy package with wooden pallet
Smooth surface, high accurate overstowing, without oxidation film Export standard package.
The customers can select the different specification according to your requirement. Sincerely invite you to join us and create bright future. Please add my msn davidwu0558athotmaildotcom Professional manufacturer of stainless steel pipe 01) commodity name: seamless stainless steel pipe 02) process method: cold rolled/cold drawn 03) surface finish: annealed/pickling 04) material: tp304, tp304l, tp304/304l, tp310/s, tp316, tp316l, tp316/316l, tp317l, tp321, tp347/h s31803, 904l, tp410, tp410l, tp403, tp420, tp430, tp405, tp410, tp410s 05) standards: astm (asme) sa/a213/m astm(asme)269 astm(asme)312 jis g3459 jis g3463 din 17456 din 17458 en10216-5 06) size: A) o. D.: 6 - 508mm B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, acc. To ansi b36.19/36.10 07) length: max. 50 meters (specific or random) 08) delivery conditions: annealed, pickled & polished 09) applications: A) general service industries (petroleum, food, chemical, paper, fertilizer, fabric, aviation and nuclear) B) fluid, gas and oil transport C) pressure and heat transmission D) construction and ornament E) boiler heat exchangers Plastic bags for each piece then packed in seaworthy Wooden cases
Pre painted steel for water heater.
galvanized steel coil galvanized steel sheet galvanized steel galvalume steel GI Steel PPGI Steel prepainted galvanized steel ALUZINC steel steel metal roofing PPGI steel trader/distributor/importer/Buyer PRIME HOT DIP GALVANIZED STEEL PLAIN SHEETS decking steel Steel Sheet Metal Roofing air ducting / VENTILATION DUCTING Galvanized Sheet Metal Ducts Hot Dipped Galvanized Steelâ?? GL steel metal air duct HVAC DUCT WORK GI duct steel decking sheet metal air conduct steel Composite Decking Color Coated Steel sandwich Panel Color Coated Steel coil color coated steel roofing sheet Galvanized Roofing sheet Corrugated roofing sheet Steel Checker Plate Prepainted Galvanised sheet spiral steel tube/pipe Large Diameter Longitudinal-Seam Submerged Arc Welded Pipes
Steel Ball: Hot Rolled Grinding Steel Ball Grinding balls for steel grinding machines (hereinafter referred to as grinding steel balls) are a kind of medium used in the ball grinding mill to grind the materials therein. With an annual capacity of 500,000 tons, the grinding steel ball is mainly used in mines, with products exported to Southeast Asia, Australia, Africa, North America, Central and South America and other countries and regions. It has become one of the largest production bases in the world, with exported products reaching 95%. Longteng grinding steel balls occupy most of the global high-end application markets. - High precision control of product quality - Base metal production lines of the wear-resisting material adopt a full set of short-stress rolling mill produced by Danieli Group, Italy. The base metal is made through continual rolling to realize high precision control of product quality. - Hot rolled steel balls are made from round steel produced by steel mills through hot rolling and with whole process automation control. The ball is uniform in hardness, with the heart having high hardness, being low in broken rate, and high in impact value. Note : 1. Roundness: Spherical with little overfill or underfill within the national standard: GB-8649-88 and YB/T 091-2005 2. Metallographic structure: Substantially martensite with some retained Austenite, Bainite& Carbides 3. Breakage guarantee: -Nil breakages upon delivery -Less than 1% in normal and correct operation conditions
Seamless Steel Tube: Seamless Steel Tube Used In Drilling Specification : OD20 - 108mm WT 1.5~20mm Aplication : Geological core drilling,Water well drilling,Hydrogeology drilling,Engineering geological drilling,Engineering drilling casing material. Technical features : Innovative system in cold rolling technology in production of seamless steel pipe used in drilling, the compactness of the higher and better toughness, can gretly improve the wear resistance of drillin gipe and resistance torque, make its service life longer. Hot Tags : 37Mn 5 Tube Drilling pipes
Welded Steel Tube: Drawn Over Mandrel Tubes Drawn Over Mandrel Tubes (DOM) Drawn Over Mandrel tubes according to tubing manufacturing standards like ASTM A513 type-5 & -6 or equivalent to meet customers requirements. Drawn over Mandrel (DOM) can be an ideal choice where a high degree of dimensional accuracy is required. Applications: - Hydraulic cylinders - Transmission shafts - Steering Columns - Suspension components - Camshafts - Axle Tubes - Drive Shafts - Jack Sleeves - Bushings Manufacturing procedure DOM steel tubing is manufactured from electrical resistance welded hollows and cold drawn through a die and over a mandrel, improving surface finish, mechanical properties and dimensional accuracy of both outside and inside diameters. DOM is a high-quality, cost-effective choice for demanding applications and machined parts because of its special characteristics: Combined with reliable weld integrity, Maximum concentricity, and Minimal wall variation. Advantages - Improved Dimensional Accuracy - Improved Physical Properties - Improved Surface Finish - Straightening, Complete Dimension, and Non-Destructive Inspection are Integral to the Process - Lower Machine Costs - Mass Savings in High Strength-to-Weight Ratio Applications Standards - ASTM A513 Type 5 - Drawn Over Mandrel (DOM) - ASTM A513 Type 6 - Drawn-Over Mandrel Special Smooth ID (SSID DOM)
Diam:3-305mm Place of origin: china mainland Material: stainless steel carbon steel Standard: din, jis, iso, gb Surface:phosphated oxid zinc plated Brand name: dongcheng
Diam:8-300mm Material:stainless steel carbon steel Finish:phosphated oil oxid zinc plated Pakcing:anti-oil paper wrapped Bulk packed in standard cartons Master carton 25x23x20cm Standard pallet 103x95x75cm
Thickness: 0.7 - 10 mm section shape: round outer diameter: 6 - 88.9 mm place of origin: jiangsu, china (mainland) secondary or not: non-secondary application: condenser tube technique: cold rolled surface treatment: solution annealing alloy or not: is alloy name: tp304 stainless steel seamless steel pipe price per ton application: boiler, heat exchanger, oil & gas industry, transportation section shape: round heat treatment: solution annealing product technique: cold drawn, cold rolled secondary or not: no, we are new product type: seamless tolerance: according to the standard material: stainless steel package: in bundles, plywood case, wooden case.
Name: Carbon Steel Pipes for High Pressure Service Standard: JIS G3455-STS410, KS D3564-SPPH42, DIN1630-St44.4, ASTM A524-GrI,II, NF A49-210-Gr.TU42B, ISO 2604/2-75-TS9 Product particular communication: Gr.STS410: C:0.30 Max. Si: 0.10~0.35 Mn: 0.30~1.40 P: 0.035 Max. S: 0.035 Max. 1) Tube dimension(OD�?WT mm) as below: 17.3*3.2; 21.7*2.8; 21.7*3.7; 27.2*3.9; 34*4.5; 42.7*4.9; 42.7*5.8; 48.6*6.4; 2) Accurate tolerance, Smooth surface, Uniform mechanical property(Mechanical Properties equilibrium); 3) Heat treatment: Non-Oxidation,Normalizing or Bright Annealing; 4) Mechanical properties: Tensile: > 450 Mpa; Elongation: > 25% (25%-30% is better) 5) Plastic plugs or caps on both ends as required; 6) Packaging Type: Round, Square, Rectangle, Hexagon. Streamline, etc; 7) Relevant Test: Chemical Component Analysis, Mechanical Properties(Ultimate tensile strength, Yield strength, Elongation), Technics Properties(Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, etc), Exterior Size Inspection, Nondestructive Test, Hydrostatic Test; 8) Main Customers: Hyundai, VOLVO, SANY,Doosan, etc. 9) Origin: China
