1, Safe working load: 200kg 2, The back board folding angle: 70 3, The thigh board folding angle: 30 4.TR/ATR:0-20 5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless. 6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely. 7, Side rail: 1),Two side rail in each side of bed. 2),It can be automatically locked when raising, and each guardrail can bear more than 50KG. 3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient; 4), Equipped with gas spring for easy operation. 5), The steel structure of the guardrail base is welded on the bed to ensure safety. 6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed. 7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed. 8, Casters 1), The four casters use 125mm center control one. 2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg 3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking. 9, Shank board can be adjusted manually by simple steel support for convenience position. 10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board. 11, There are 1 hook in each side for drainage bag. 12, It equipped with manual CPR for emergency treatment.
Number:SLADE-SSST Specifications:2-19mm Classification:Steel section Introduce:Thickness: 2-19mm Length: 4-16m Grade: EN, ASTM, JIS etc product description Specifications of Cold Formed Hollow Section - Square Tube, Rectangular Tube and Circular Tube: 1. We can produce circular tube, square tube and rectangular tube etc 2. Standard and Grade: ASTM A500 Gr.A,B,C A53 Gr.A,B etc 3.Specifications for RHS- Rectangular Hollow Section:
1.Specifications of Stainless Steel Sheet/ Plate: 1. Material grade: 201,202,301,304,304l, 316,316l,321,410, 420,430,4130,4140,etc. 2. Standard: JIS, AISI, ASTM, GB, DIN, EN 3. Thickness: Cold rolled:0.2mm-5mm Hot rolled: 3.0mm-75mm 4. Width: 1000/1219/1500/2000mm,etc 5. Length: Customized 6. Surface: 2B, BA, No.1, No.4, No.8, etc 2.Decorative/Colored Surface of Stainless Steel Sheet/ Plate: Mirror, No.4, HL NSP, Bead Blast, Vibration, No.1, No.2, No.6, No.8,HL Gold, Mirror Gold, Vibration Gold NSP, No.4 Copper NSP, Mirror Copper, Bead Copper,
Number:SLADE-PPGC Specifications:Thickness 0.15-2mm Classification:Prepainted steel Introduce:Thickness: 0.15 to 2 mm Width: 600 to 1250mm Surface: Orange-peel,transparent finish,anti-Stat product description 1:Specification of prepainted galvanized steel coil: 1): thickness in our factory we can produce from 0.15 to 2 mm 2): width from 600 to 1250mm 3): color and surface can be customized according to customer's request. 4): monthly capacity over 10000 tons 2: Details of PPGI ( process flowsheet)
As a professional manufacturer,we supply high-quality seamless tube and pipe for nuclear & thermal power plants,high-pressure boiler,petroleum and petrochemicals,high-pressure gas cylinder,military industry,alloy structures,with Diameter 20~1200mm,wall thickness 2.11~200mm,length 4~12m,The annual production capacity is 250,000tons. Seamless Steel Pipe, Carbon Seamless Steel Pipe(CS), Stainless Seamless Steel Pipe(SS) and Other Pipe Fittings Top quality â??â?? Hydralic Test, X-ray, Offer-line UT, Eddy Current Inspection, etc, 3rd party inspection to test. Fast delivery â??â?? Many sets of advanced production equipment to produce, as well as perfect logistics system. Timely quotation â??â?? professional sales quote for you after receive your inquiry. Certificate share â??â?? MTC, ISO, Inspection Report and other quality certification. Used for oil and gas transportation, the general structure, mechanical structure. Specification of Seamless steel pipe: 1) Standard: DIN, ASTM, API, JIS 2) Wall Thickness: from 2 to 200mm 3) Outer Diameter: from 20 to 1200mm 4) Grade:ST35.8, ST37, ST42, ST45, ST52, API 5L /GR.B-X60, API 5CT /J55 K55 N80, A53, A106, A192, A179, A210, and etc. 5) Surface Coating:varnish painted on pipe(black painting),anti-corrosion oil,galvanized,or painting as customer's request. Our factory and product photos:
We can produce : Stainless Steel Wire/Stainless Steel Microwire, Stainless Steel Fiber/ Stainless Steel Fibre, Stainless Steel Wire Rope, Stainless Steel Welding Wire / Welding bar / rod etc. 1. Material Grade:316L, 302, 304, 430, 201, 202, etc 2. Size: 0.008 to 6 mm 3. Weight per coil: 50 to 600kg Some material grades of stainless steel wire brief intoduction: Type 302 stainless steel wire is a general purpose stainless alloy typically composed of 18% chromium and 8% nickel. It is the most widely used stainless spring wire because of its high corrosion resistance properties and good tensile strength. For spring applications it is generally furnished in the cold drawn condition. Type 302 springs have good strength at moderate temperatures. If properly treated after forming they will set less than most other spring materials at temperatures up to 500ºF. Type 302 material in the spring condition is slightly magnetic due to the transformation of some martinsite in the drawing operation. The greater the amount of cold reduction the higher the degree of magnetism. Gibbs soap coated Type 302 stainless steel wire is available in the size range 0.014" to 0.625". All wire conforms to ASTM-A-313 and AMS-5688. Similar in composition to Type 302, Type 316 stainless steel wire has a slightly higher nickel content and 2-2.50% molybdenum giving this alloy better corrosion resistance. Type 316's tensile strength is 10-15% lower than that of Type 302, and the alloy is slightly less magnetic in the spring temper than Type 302. With its superior cold working properties, it can be used for severe cold forming operations and exhibits short time tensile and creep strength properties at elevated temperatures. Gibbs Type 316 stainless steel wire is coated for coiling and is available in the range 0.015" - 0.625" conforming to ASTM A 313. Nickel coated available on application in size range 0.007" to 0.130"
number:Cold rolled steel specifications:0.15mm - 3mm classification:Cold rolled steel introduce:Thickness: 0.15mm - 3mm Width: 900 to 2500mm Coil ID: 508mm/610mm 1. Specifications of Cold Rolled Steel Coil: 1) Grade: SPCC, SPCD, SPCE, St12 etc. 2) Standard: JIS, EN 10131-2006, DIN EN 1002 3) Thickness: 0.15mm - 3mm 4) Width:900 to 2500 (mm) or per customer's request 5) Coil ID: 508mm/610mm
Number:SLADE-SST Specifications:0.1 to 3.5mm Classification:Stainless steel tape Introduce:Material grade: 201, 302,304, 316, 316L, 403 etc Thickness: 0.01mm-3.5mm Width: 3mm-610mm Brief Introduction: Stainless Steel Strip has been the flagship product of our factory since 1984. Our extensive inventory of stainless steel alloys, along with our six Sendzimir and three 4-high rolling mills make us uniquely equipped to roll precision stainless strip to exacting dimensions. Along with our mills, we offer eight controlled atmosphere annealing lines as well as stainless coil cleaning, Ungerer tension leveling, slitting, edging and oscillate winding. For over 30 years, our engineers have worked closely with our customers to design a custom strip product for each application they require. From material selection to proprietary rolling processes, our staff is available for each step of the manufacturing process. Our engineers and highly skilled sales staff are experienced in designing custom strip products. We offer large inventories of stainless coil and worldwide manufacturing facilities in North America, Asia, Europe and Latin America,Africa etc. This network of raw material and global production ensures your precision stainless steel strip will arrive to you where and when you need it. SS Precision Strip Product Type SS and all kinds of high alloy products. Specifications Thickness 0.01~3.5mm, width3~610mm. Product Features Aiming at high-end market, the product is featured with high strength, high accuracy, ultra-thin, etc.
number:SS-COIL specifications:Thickness 0.025-4mm classification:Stainless steel coil introduce:Stainless steel coil material grade: 201, 202, 301,302,303,304,309S, 410S, 430, 316, 316L 1:Product description Standard: ASTM A240, JIS G4304, etc. Material grade: 200&300&400series Surface finish: 2B, BA, Mirror finished, N04, Hair Line, Matt finished, 6K, 8K Type 201 stainless steel is an austenitic chromium-nickel-manganese stainless alloy. It was developed mid century to conserve nickel and it is used as an alternative to type 301 in some tempered applications. Because of 201â??s relatively high yield strength in the annealed condition, use of 201 is limited. Type 201 is generally used in the tempered condition particularly for springs and fasteners. 201 Stainless will retain a comparable ductility to 301 even with the higher yield strength. Alloy 204CU is a chromium-magnesium austenitic stainless steel with an addition of 2-4% copper and nitrogen of 0.05-0.25%. Due to the addition of copper the alloy has better formability than 201 and 304. The copper improves corrosion and resistance to stress corrosion cracking in certain media. 204CU bridges the cost-property gap between 200 and 300 series stainless. Alloy 204CU is slightly after cold working but can be minimized. Type 301 is an austenitic stainless steel capable of attaining high strengths and ductility by cold working. It is not hardenable by heat treatment. Type 301 is non-magnetic in the annealed condition and becomes increasingly magnetic with cold working. It is preferable over types 302 and 304 in the tempered condition because the higher elongations (which are attainable at a given strength level) facilitate fabrication. Type 302 is not hardenable by heat treatment and in non-magnetic in the annealed condition. It becomes increasingly magnetic with cold working. If carbide precipitation is an issue 304 may be a better choice with its lower carbon content.
Specifications of Stainless Steel Tubes: 1. Standard: GB, ASTM, JIS, DIN 2. Grade: 201, 202, 301, 321, 304, 304L, 316, 316L, 409, etc 3. OD range: 2mm-1200mm 4. Wall thickness range: 0.06mm-200mm 5. Length: max.18000mm 6. Surface finish: Polishing (180#,220#,240#etc,)Hairline, acid pickled and so on 7. Manufacture technology: cold drawn/cold rolled/hot rolled 8. Type: Seamless & Welded Typical Steel Grade :Austenite, ferrite, marstenite, duplex stainless steel and alloy steel, nickel-based alloy, non-ferrous metallic tube and profiled bar, etc. Specifications Φ2�1200 mm * wt: 0.06�200 mm.
Smooth surface, high accurate overstowing, without oxidation film Export standard package.
The customers can select the different specification according to your requirement. Sincerely invite you to join us and create bright future. Please add my msn davidwu0558athotmaildotcom Professional manufacturer of stainless steel pipe 01) commodity name: seamless stainless steel pipe 02) process method: cold rolled/cold drawn 03) surface finish: annealed/pickling 04) material: tp304, tp304l, tp304/304l, tp310/s, tp316, tp316l, tp316/316l, tp317l, tp321, tp347/h s31803, 904l, tp410, tp410l, tp403, tp420, tp430, tp405, tp410, tp410s 05) standards: astm (asme) sa/a213/m astm(asme)269 astm(asme)312 jis g3459 jis g3463 din 17456 din 17458 en10216-5 06) size: A) o. D.: 6 - 508mm B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, acc. To ansi b36.19/36.10 07) length: max. 50 meters (specific or random) 08) delivery conditions: annealed, pickled & polished 09) applications: A) general service industries (petroleum, food, chemical, paper, fertilizer, fabric, aviation and nuclear) B) fluid, gas and oil transport C) pressure and heat transmission D) construction and ornament E) boiler heat exchangers Plastic bags for each piece then packed in seaworthy Wooden cases
Number:SLADE-GSS Specifications:Thickness 0.12-5mm Classification:Galvanized strip Introduce:Thickness: 0.12mm-5.0mm Width: Customized according to client's request Coil ID: 100mm/508mm Product description Specification of Hot Dip Galvanized Steel Strip: 1) Capacity: about 10,000 ton per month for steel strip/tape product 2) Thickness: from 0.12mm to 5.0mm, all available. 3) Width: Customized according to client's request. 4) Coil weight: from 100kg to 1500kg 5) Zinc coating weight: 30g/m2-600g/m2 6) Spangle : big spangle, normal spangle, small spangle, non-spangle
Product Details Pipe End: square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled, Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) Packing: Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps. Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Hardness Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, NDT TEST ( ET TEST, RT TEST, UT TEST)
500 ml double wall sus 304 steel water tumbler with straw
steel bar bender, rebar bending machine, cheap price.
Steel Ball: Hot Rolled Grinding Steel Ball Grinding balls for steel grinding machines (hereinafter referred to as grinding steel balls) are a kind of medium used in the ball grinding mill to grind the materials therein. With an annual capacity of 500,000 tons, the grinding steel ball is mainly used in mines, with products exported to Southeast Asia, Australia, Africa, North America, Central and South America and other countries and regions. It has become one of the largest production bases in the world, with exported products reaching 95%. Longteng grinding steel balls occupy most of the global high-end application markets. - High precision control of product quality - Base metal production lines of the wear-resisting material adopt a full set of short-stress rolling mill produced by Danieli Group, Italy. The base metal is made through continual rolling to realize high precision control of product quality. - Hot rolled steel balls are made from round steel produced by steel mills through hot rolling and with whole process automation control. The ball is uniform in hardness, with the heart having high hardness, being low in broken rate, and high in impact value. Note : 1. Roundness: Spherical with little overfill or underfill within the national standard: GB-8649-88 and YB/T 091-2005 2. Metallographic structure: Substantially martensite with some retained Austenite, Bainite& Carbides 3. Breakage guarantee: -Nil breakages upon delivery -Less than 1% in normal and correct operation conditions
Pre painted steel for water heater.
galvanized steel coil galvanized steel sheet galvanized steel galvalume steel GI Steel PPGI Steel prepainted galvanized steel ALUZINC steel steel metal roofing PPGI steel trader/distributor/importer/Buyer PRIME HOT DIP GALVANIZED STEEL PLAIN SHEETS decking steel Steel Sheet Metal Roofing air ducting / VENTILATION DUCTING Galvanized Sheet Metal Ducts Hot Dipped Galvanized Steelâ?? GL steel metal air duct HVAC DUCT WORK GI duct steel decking sheet metal air conduct steel Composite Decking Color Coated Steel sandwich Panel Color Coated Steel coil color coated steel roofing sheet Galvanized Roofing sheet Corrugated roofing sheet Steel Checker Plate Prepainted Galvanised sheet spiral steel tube/pipe Large Diameter Longitudinal-Seam Submerged Arc Welded Pipes
Seamless Steel Tube: Seamless Steel Tube Used In Drilling Specification : OD20 - 108mm WT 1.5~20mm Aplication : Geological core drilling,Water well drilling,Hydrogeology drilling,Engineering geological drilling,Engineering drilling casing material. Technical features : Innovative system in cold rolling technology in production of seamless steel pipe used in drilling, the compactness of the higher and better toughness, can gretly improve the wear resistance of drillin gipe and resistance torque, make its service life longer. Hot Tags : 37Mn 5 Tube Drilling pipes
