Provide High Purity Molybdenum Plate Moly Steel Making Bars Size 12 - 14mm Length 300mm
Molybdenum Steel Making bars are made of by material with high melting point, corrosion resistance, high density, good thermal conductivity and electrical conductivity. Molybdenum bar is resistant to corrosion when the humidity is below 60%. However, it must be protected at elevated temperatures. Tungsten can oxidize in the presence of oxidizing gases at temperatures above 250�° C. Despite this vulnerability, Molten glass, nitrogen, inert gases, molten metals and ceramic oxides only slightly affect it.
Moly bar has high melting point so it's suitable for very high-temperature applications. It is also characterized by a uniquely low coefficient of thermal expansion and a very high level of dimensional stability.
Molybdenum bars are manufactured as random length pieces or cut to customers' desired lengths. In addition, there are three different surface processes or finishes which are provided, depending on the desired end use of the molybdenum rod.
Molybdenum Bars Introduction:
Purity: Mo 99.95%
Appearance: Silver gray metal luster
This product is made with FMo-1
The impurity content accords with GB3462-82 standard
Molybdenum products have the properties of high melting point, good thermal conductivity and low thermal expansion. At high temperature, they can resist oxidation and have high strength without any distortion during the procession, etc.
We provide 99.95% Moly Rod / Molybdenum Round Bar diameter 1 - 100mm For Sapphire Industry
Molybdenum ruond bar is resistant to corrosion when the humidity is below 60%. Molybdenum round bar is made of by high quality molybdenum raw material with high melting point, corrosion resistance, high density, good thermal conductivity and electrical conductivity. However, it must be protected at elevated temperatures. Molybdenum can oxidize in the presence of oxidizing gases at temperatures above 250�° C. Despite this vulnerability, Molten glass, nitrogen, inert gases, molten metals and ceramic oxides only slightly affect it.
Moly bars have high melting point so it's suitable for very high-temperature applications. It is also characterized by a uniquely low coefficient of thermal expansion and a very high level of dimensional stability.
Molybdenum Round Bar:
Purity: Mo 99.95%
Appearance: Silver gray metal luster
This product is made with Mo-1
The impurity content accords with GB3462-82 standard
Molybdenum products have the properties of high melting point, good thermal conductivity and low thermal expansion. At high temperature, they can resist oxidation and have high strength without any distortion during the procession, etc.
SEKO Machinery 20% energy saved bright annealing stainless steel coil tube making machine specializes in industrial usage, like HVAC pipe fittings, sanitary tubes, water pipes, valve pipe fittings, petrochemical pipes, chemical industry, medicine industry, wine-making industry, petroleum industry, food industry, automobile industry, paper making industry, air-condition making industry and so on. Products dealed with our tube mill could reach ASTM, DIN, ISO, GB and JIS standard.
Mild steel is carbon steel with a carbon content of less than 0.25 percent. It is called mild steel because of its low strength and hardness.It includes most ordinary carbon structural steels and some high quality carbon structural steels, most of which are used for engineering structural parts without heat treatment, some are used for mechanical parts requiring wear resistance through carburizing and other heat treatment
our factory focus on small batch, special shape section steel bar, such as triangle, trapezoid, type L,pipeline guide, textile machinery pawl, can now produce nearly a hundred kinds of steel bars, a variety of special-shaped materials, high precision materials have been well received by users.Other products can control the molding accuracy within 0.05mm according to the drawing
we have Cold drawn trapezoid steel;Cold drawn Angle steel;Shaped cold-drawn steel;Cold drawn round steel;3-50 mm;Boiler discharge pin;Cold drawn hexagonal steel;Solid Angle steel;Supporting roller;Cold drawn flat steel;Cold drawn steel;Square pin, flat key;Alien: processed according to the drawing
Sichuan Liaofu Special Steel Industry Co., Ltd has been in steel area for more than ten years,focus on producing 4140 42crmo4 4130 4135 scm440 25crmo4 1010 1020 1045 seamless steel tube,the branch office started in jiangushu on the business of steel pipes
we strictly carry out the quality system iso9001:2000 standard during production process,
adopts advanced modern production management and quality management, to obtain high quality steel pipe . After acid pickling, cold rolling, cold drawn, and then adopt advanced technology for high temperature heat treatment (NBK status) to produce steel pipes with surface: bright, smooth, high precision, high polish, both inside and outside wall without oxidation layer, internal and external wall of high precision, mechanical performance fits well in any Angle bending, and can bear high pressure, cold bending deformation, flaring, flattening, tensile and other require ments, our steel tube doesnot burst when cold bending, no cracks, no oxide layer and the internal and external wall, etc.
The precision steel tube is made by seamless steel tube ,which is through non-oxygen tempering treatment to eliminate the surface and internal stress.The product is of high precision and ductility, easy to be processed into various required shapes, and cross section of the tube will not be reduced or flattened.The surfaceis of high presicion, and the surface hardness is moderate and easy to be connected. The inner hole and surface are treated with phosphating anti-rust treatment without acid cleaning and rust removal.
The company covers an area of more than 8000 square meters with an annual output of more than 5,000 tons.The main products are: cold drawing or cold rolling precision seamless steel pipe and related supporting bright tubing, conveying fluid seamless steel pipe.Our company produce seamless steel pipe in Europe (Germany) DIN series standard is the basic standard, using high quality tube blank, on the basis of this combined with our unique steel pipe manufacturing process,.Steel pipe is produced in high precision and high cold drawn.Because of the special bright heat treatment process, the inner and outer walls of steel tube are not oxidized after heat treatment.
best sae 4140 steel tube 1.7225 machined tube,
4140 Hexagon Cold drawn Shaped Steel Tube
4140 Steel Roller,we can produce Machined Part according to drawings
Standards:ASTM,JIS,GB,EN(DIN,BS,NF) Or Per as clients requires.
Mild steel is carbon steel with a carbon content of less than 0.25 percent. It is called mild steel because of its low strength and hardness.It includes most ordinary carbon structural steels and some high quality carbon structural steels, most of which are used for engineering structural parts without heat treatment, some are used for mechanical parts requiring wear resistance through carburizing and other heat treatment
our factory focus on small batch, special shape section steel bar, such as triangle, trapezoid, type L,pipeline guide, textile machinery pawl, can now produce nearly a hundred kinds of steel bars, a variety of special-shaped materials, high precision materials have been well received by users.Other products can control the molding accuracy within 0.05mm according to the drawing
we have Cold drawn trapezoid steel;Cold drawn Angle steel;Shaped cold-drawn steel;Cold drawn round steel;3-50 mm;Boiler discharge pin;Cold drawn hexagonal steel;Solid Angle steel;Supporting roller;Cold drawn flat steel;Cold drawn steel;Square pin, flat key;Alien: processed according to the drawing
Jigger tube is a stainless steel tube usually SUS316 that drilled with about 100,000 small holes of 200 microns per metre of tube length.This design is widely used in sugar industry to boost circulation and heat transfer rates in vacuum pans. The jigger tube system injects and distributes numerous small bubbles of steam at controllable rates into the base of the pan. Circulation is improved through a combination of the rising bubbles and the increased heat transfer that results from the increased massecuite velocity.
SKLD type Stainless steel electromagnetic flowmeter is the intelligent electromagnetic with research and development, which adopts domestic and foreign advanced technology. Electromagnetic transducer with high-speed central processing unit (CPU) and the features of rapid computing speed and high precision, reliable performance measurement are in both Chinese and English menu.
Sensor uses non-uniform magnetic field technology and special magnetic circuit structure. Magnetic field is stable and reliable, and the circuit structure reduces the volume, The sensor can reflect the traffic change timely and effectively, and have a stable value of measuring water, sewage, slurry, pulp, acid, alkali, salt slurry liquid and food, etc. There are lots of wide applications in the petroleum chemical industry, metallurgy, coal, water conservancy project of water supply and drainage, sewage treatment etc. The electromagnetic flowmeter has two types: the compact and the sensor for remote transmitter.
This is Cindy from Feeda Group, China.
We are a supplier of below products:
Steel Welded Chains, Wire Rope, Webbing Slings, Chain Hoist, Shackle, Turnbuckle, G80 hooks, etc
We have specialized in this field for several years, with good quality and pretty competitive price.
Prefab Light Steel Villa House
Light steel frame villa house is our main product, mainly used for houses,home, family, resort, holiday, hotel, hospital and other long life span residential buildings.
Steel frame prefabricated houses are constructed by an industrialized production mode, of which partial or all the components are prefabricated in a factory. The prefabricated components are then transported to the construction site and assembled by a reliable connection method. It is also called industrial residence or industrialized residence.
Main Features
1.Energy-Saving & Enviromental protection.
2.High prefabricated capability, building a house like making a car.
3.Low self-weight and material saving.
4.Safe and durable.
5.Comfortable living.
6.Perfect joint and complete facility.
