DC53 tool steel is a general purpose cold work tool steel with exceptional Toughness, Wear Resistance, Compressive Strength and Temper Resistance. Applications include: Punches & dies, Draw & forum dies, Shear blades, Shredder knives, Thread & form rolls, Cold heading dies, mill rolls & slitters.
S7 tool steel is a shock-resisting tool steel with excellent impact properties. Because it is an air-hardening steel, it is safe and stable in heat treatment. S7's most important characteristic is its versatility. It is used widely for medium cold work tools and dies, for plastic-molding dies, shear blades, medium hot work dies, master hobs, and for component parts of many products. S7 is the benchmark shock resisting tool steel.
1.2316 plastic mould steel is martensitic stainless chromium steel for plastic moulds, high corrosion resistance than 1.2083, resistant to chemical attack, excellent wear resitance, uniform hardness in all dimensions, etch grainable and easy to machine, high surface finish and polishability. Not suitable for nitriding and chrome plating because of the high chrome content. This grade can be produced on request by the process in hardened and tempered, soft annealed and ESR condition.
D6/1.2436 tool steel is a high-carbon, high chromium tool steel alloyed with tungsten that is characterized by high compressive strength, high wear resistance, high surface hardness and good hardening stability. Applications of D6/1.2436 tool steels: forming tools, molds for abrasive plastics and ceramics, long-run press tools, blanking and shearing tools for hard materials.
O2/1.2842 tool steel is an oil hardening tool steel type supplied in the annealed condition and characterised by its characteristics of offering good durability, excellent wear resistance and its ability to hold a good cutting edge. O2 tool steel is a good quality general purpose tool steel often used where the expense of a high carbon high chromium tool steel would not be justified. Typical applications for O2 tool steel include medium run dies, press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, plug gauges, thread gauges, thread cutting tools and precision measuring tools. It is also a popular tool steel for cams, cloth cutting knives, cold taps, reamers, collets, cutting hobs, strip slitting cutters, trimmer dies, tube expander rolls, plastic moulds and woodworking knives.
H11/1.2343 tool steel is a 5% chromium hot work steel that is characterized by excellent impact toughness. It contains less vanadium than the widely-used H13 tool steel. This provides for the higher toughness, with some reduction in wear resistance and temper resistance. H11 tool steel is a deep-hardening, air-hardening steel that exhibits minimal size change during heat treatment. The steels are subjected to minimal distortion during hardening due to their balanced alloy content. It has good resistance to thermal fatigue cracking (heat checking) and excellent resistance to gross cracking and thermal shock when water cooled in service. H11 tool steel is recommended for hot tooling applications where maximum resistance to cracking is required. Such applications include hot punches, die casting dies, forging dies, hot shear blades, hot gripper dies, and extrusion tooling.
H13/1.2344 Chromium Hot-work Steel is widely used in hot and cold work tooling applications. Due to its excellent combination of high toughness and fatigue resistance, H13 is used more than any other tool steel in tooling applications such as die casting dies for zinc, white metal, aluminum and magnesium. It is also widely used for extrusion dies, trimmer dies, gripper dies, hot shear blades, casings, and other similar hot work applications.
Characteristics: hot work tool steel for oil or air hardening to develop high hot strength, retention of hardness, and heat checking resistance. Applications: highly stressed hot work tools, such as mandrels, dies and containers for metal tube and rod extrusion; hot extrusion tools; tools for manufacture of hollows, screws, rivets, nuts and bolts. Die casting tools, forming dies, die inserts, hot shear blades.
1.2550 Tool Steel is an alloy shock-resisting tool steel, which is suited for both hot and cold work applications. The tungsten content of this tool steel grade confers fatigue resistance, the chromium content gives depth of hardness and resistance to abrasion. 1.2550 tool steel is suitable for cold work tools subject to heavy shock and uneven loading. This steel is also used with great success for chisels and punches required for heavy work on hard and tough materials. It is suitable for hot work applications where high fatigue strength in combination with medium hot hardness is desirable. Tools made from this tool steel can be water cooled in service with little risk of cracking.
1.2601 tool steel with high wear resistance against abrasive and adhesive, good toughness, edge-holding ability and compression strength, low distortion, non-deforming, full hardness with air hardening in any dimension, suitable for bath nitriding. 1.2601 tool steel applications mainly for making high performance blanking, punching, stamping and cutting tools and dies up to 6mm sheet thickness, thread rollings, chasers and dies, cold forming and bending tools, precision blanking dies, longitudinal and circular shear blades for plastic, paper and metal, milling cutters, reamers, broaches, hobbing tools, tools for drawing, deep drawing and cold extrusion, woodworking tools, pressing tools for the sinters, ceramics and pharmaceutical industries, cold piercers, measuring tools, rolling cutters and shaping wheels, cold pilger mandrels, flanging, straightening and beading rolls, trimming and splitting dies, tools for the cold manufacture of screws, nuts and rivets, plastic moulds.
1.2767 tool steel is a higher carbon version of the standard 4.25% nickel oil hardening steel. It is a good quality tool steel that achieves high impact and compressive strength and is suitable for applications demanding extra wear resistance. With its characteristics of good full hardenability, good polishability and excellent toughness this cold work tool steel specification is widely used for plastic mould applications. 1.2767 tool steel typical applications and components include plastic moulds, cutlery dies, shear blades for heavy gauge material, cutting tools, drawing jaws and highly stressed coining tools.
A2/1.2363 tool steel is a 5% chromium medium alloy cold work tool steel possessing sufficient hardenability to be air hardened to 60 HRC surface hardness level with good depth of hardening. This widely used tool steel has low distortion in heat treatment, good machinability, good toughness for severe service, high abrasion resistance, and deep hardening properties in large sections. A2 has a fully spheroidized structure and has exceptionally low inclusion levels. A2 is available in de-carb free rounds, flats and squares, as well as drill rod and ground flat stock. Typical applications for A2 tool steel are blanking, forming, and trim dies, stamping dies, coining dies, thread roller dies, knurls, knurling tools, mandrels, master hobs, cold forming tools, spindles, shear blades, slitter blades, molds, punches, block and ring gauges, punch plates, reamers, brick mold liners, forming rolls, etc.
D2/1.2379 cold work tool steel is chrome-molybdenum-vanadium steel with big hardenability for hardening in oil and in air, especially high resistance to the wear (higher than by 1.2080), good cutting power, very good firmness in the pressure, lower toughness (but higher than by 1.2080). This steel shows good dimensional stability at the heat treatment, suitable for hardening to the secondary hardness (the possibility of nitriding). Further the steel is very difficult to sharpen, it works at the heat with difficulties and has a rather difficult workability in the annealed state. D2/1.2379 is suitable for making tools for cold cutting, i.e. all kinds of tools with the long durability for cutting on presses and punching of materials of smaller thicknesses and materials of high hardness (especially difficult-shape tools for cutting, e.g. transformer metal sheets and metal sheets from stainless steels), knives for plate shears for the sheet and strip steel up to thickness of 10 mm of sheared material, knives for wire cutting etc. Tools for mechanical working such as e.g. smaller girders and tools for drawing, all kinds of tools for transformation and punching of materials. Further the steel is suitable for simple and symmetric tools for pressing and pushing, tools for thread rolling, plain and profile rolls, swages and also for cold work. Cutting tools such as broaching thorns, profile knives and difficult-shape milling machines for lower cutting speeds and for treatment of nonmetallic abrasive materials. Further the steel is applied in the production of highly stressed molds and their components for working of plastic and powder substances, glass, porcelain and ceramic materials. By tools for crushing and grinding it is used for hammers of crushers and jaws for mild grinding and crushing.
Electric Power Transmission Line Steel Tower : 1. Price Term: EXW, FOB, CFR or CIF. The price include pole shaft, base plate, crossarm ,anti-climbing device, fasten parts and anchor bolt. Shipping seaport: Qingdao Seaport. Please provide drawings if you have so that we can calculate the accurate price for you. We also provide design according to your requests, if you don't have drawings. 2.Certificate :ISO 9001:2008,ISO14001: 2004, OHSAS 18001:2007 3. Performance Standard Besides conforms to the drawing and design, the materials and fabrication of tower components shall conform to the following standards (Chinese Standards) and customer's requirements. 4. Steel pipe tower welded requirements 1 )we used CO2 welding and submerged arc auto welding or other methods as AWS D1.1 2 )Welded seam shall be full penetration and grinded. 3 )The welded product has no fissure, scar, overlap, layer or other defects. 5. Steel tower Galvanization All steel items, bolts, nuts, washers & other components to be hot -DIP galvanized with uniform. As per (ASTM-A-123). 5. MOQ: One 40FT Container. 6. Payment Term: Typically 30% by T/T as deposit, balance by T/T or L/C at sight before shipment. Other payment way can be negotiated. 7.Delivery Time: 2 weeks per container after PO/drawing/prepayment confirmed. 8. Package: Normally wrapped by plastical bags ,mat or burlap cloth at the top and bottom,or according to clients requirement. as client's requirement
Diameter:38mm, length:5.8-12mm Standard seaway package
Seamless steel pipe have a wide application to the general structure, mechanical structure, boiler and transport liquid with seamless steel tubes Outer diameter :13.72mm-726mm Wall thickness:1.25mm-100mm
Sheetray provides one-stop business services for oversea customers who imports metal-made from china factories. In sheetray, we exclusively focus on metal products. Briefly we focus on: --- metal raw material --- metal casting --- metal die and mold --- metal machining --- sheet metal fabrication --- metal hardware and accessory. The services we provide include: --- supplier sourcing: we help customers to seek for competitive suppliers according to their product specifications. --- factory audit: we help customers to make on-site factory audit to verify that the supplier is well-organized and well-equipped for the customer's specific products. --- quality control: we help customers to supervise the mass production in the factory to control the quality and production lead time. --- container loading check: we help customers to supervise the container loading in the factory to make sure package and transportation is safe and saving. --- technical support and factory-visit assistance: we provide value-added services for customers. Sheetray, different from other third-party inspection company, is working at providing project management for customers. That means, we help customer to take charge of everything relative to their projects in order to save time, cost, energy for customers while at the same time enable customers to receive quality products on time. For more information on sheetray, please go to www.Sheetray.Com We are your buying agent in china!
Telecommunication camouflaged tower is a communications tower it make the surrounding natural environment in harmony,effectively solve the difficult problem of establishment of the station at National Scenic Area.it take of synthetic resin and advanced chemical raw materials as sculpture substrate for tree trunk , the tree section , bark , roots , etc.It was sprayed of advanced acrylic paint to modify and protect surface.The products enhanced durability is up to 5 years not fade,10 years does not crack and fall off. Camouflaged telecom tree tower advantages: The Structure is refined and realistic , the appearance is elegant and beautiful .Bionic Tower produced modeled on the actual plant.It installed in the bush of the scenic areas, parks , squares ...into the natural.Communication Tree tower humane shape design have the vibrant flavor of the times. In bundle or according to customer requirement
Power Transmission Tower 1. Based on its shapes, it is generally divided into 5 types: Goblet type, cathead type, cathead type, shaped type and barrel type. Based on application, it can be divided into: Strain tower, straight line tower, angle tower, transposition tower (tower for transposition of wire phase position), terminal tower and crossing tower, etc. 2. Their structural features are: All kinds of towers are of space truss structures; Bard are mainly composed of single equal angle steel or assembling angle steel; Materials are generally Q235(A3F) and Q345(16Mn); Bars are connected by black bolts with shearing force; Entire tower is composed of angle steels, link plates and bolts; A few components like tower base are assemblies of welded steel plates for convenience of hot galvanizing anti-corrosion, transportation and erection. 3. For steel towers that with height below 60m, shackles are mounted on one of main columns for construction people to climb to work. Our Company is a large scale enterprise specializing in manufacturing of 220KV (330KV) electric power steel tower with advanced manufacturing facility and international top-ranking assembly line. In bundle or according to customer requirement
Material:Q235 or Q345 life span:more than 30 years surface treatment:hot galvanized or painting Place of Origin : Hebei Hight:5meters-60 meters Shape:steel structure Size and style :depending on your order according to customer's request.
