1. Strand wire should have the same diameter, the same intensity, and the same level of zinc coating.
The diameter and the lay length should be uniform, and have no loose after cutting
Strand wire should be tight; they should not be staggered, and have no breaking and bending.
2. Strand wire and the overhead ground wire of 1 * 3 are not allowed to connected, other types of strand wire should be connected with welder. The distance between any two joints shall not be less than 50m; the measures should be taken to prevent the joints eroding.
3. Mechanical Properties
it should follow the 5.3 mechanical requirements in "People's Republic of ferrous metallurgy industry standard YB/T5004-2001.
4. Coating quality
4.1 Galvanized steel's surface should be coated with uniform continuous layer of zinc, without cracks and open spots
4.2 Zinc coating of the steel can have white spots, flash point and the individual accumulation of zinc layer, but can not affect the use. But the value of the local wire must not exceed 2 times as large as the positive deviation of the diameter.
4.3 The coating quality of the strand wire with the split shares should meet the following table:
4.4 The zinc coating should be firmly enlaced 6 laps on the mandrel in the above table, no cracking or the zinc coating layer. It can not be able to wipe with the extent of bare fingers.
5. Refer to "the People's Republic of ferrous metals industry standard YB/T5004-2001 galvanized steel wire¡±.
"People's Republic of ferrous metallurgy industry standard YB/T183-2000 strand of rare earth alloy coating¡±.
(B) The raw materials
1. The steel of the strand wire shall be used in the requirement of YB/T699-1999. The steel grades are 5 # or 50 #.
2. Zinc ingot, used in galvanized steel wire, should use the zinc in GB/T470 of 0 or 1.
(C) Factory inspection and testing methods
all the factory inspections are divided into full inspection and spot inspection. Full inspection requires checking the appearance, structure, diameter, galvanized coating mass, twist method and its quality of each steel stranded wire.
1. Inspect the surface quality of the strand by visual inspection.
2. Use the measuring tool of 0.1mm to inspect the diameter of the strand.
3. Breaking load test is required according to the standard GB/T8358-1987.
Produce steel wire according to DIN 17223 Class C and Class D, DIN 2078, BS 5216, JIS G 3521-1991 and GB 4357-89 standard. The diameter range : Spring steel wire ( 0.15mm-12.0mm).
Mo content>=99.95%.
Type:black wire and white wire.spray molybdenum wire, heating molybdenum wire.Tangent cut molybdenum wire.
Used in making heat parts for electronic vacuum device,heating parts,hooks of various type of bulb, mandrels of tungsten coiled coil wire etc.
Description: Galvanized steel wire for armoring cable
Dia: 0.30mm to 6.0mm
Tensile Strength: 340-550Mpa, 700-900Mpa, 1000-1300MPa
Zinc coating: 40-400g/m2
Elongatation: 10% min.
Standard: BS1442, BS443(EN10257-1 and EN10244-2)
ASTM, BS, DIN, JIS, GB
(1)Packed in coil: coil weight from 25kgs to 800kgs
(2)Packed in plastic reel: each reel is aoubt 25kgs to 40kgs
(3)Packed in coil with steel hook and palletied.
2104 Steel Wires Suppliers
Short on time? Let Steel Wires sellers contact you.
Description: galvanized steel wire/strand for ACSR conductor
Diameter: 1.57mm to 4.8mm
High corrosion resistance and strength
Longer durability under severest conditions
Material: carbon steel coil and zinc, zinc content is of 99.85% min.
Material applied for razor type barbed wire and barbed tape wire: Galvanized razor wire or stainless steel razor coils.
Razor wire can be installed in the form of barbed tape wire or concertina coil to walls or fencings.
For the packing ,we mainly supply two kind of packing : simple packing and carton packing.
1, For simple packing, inside is water proof paper and outside is weaven bags; sometimes we can load the container one coil by one coil and sometimes we can make the coils to big bundles and for loading easily.
Mainly for BTO-10,12,22,30 and CBT-25
2, For carton packing, it is mainly application to CBT-65,60 (450mm)
Material: High quality low carbon steel wire (galvanized, PVC coated); Color available in blue, green, yellow etc.
Weaving and Characteristics: Twisted and weaved; firm and beautiful.
Uses: Be used as barriers for pastures, railways and expressways, etc. Barbed Wire mainly serves in protecting of grass boundary, railway, and highway and also widely used in military, jail, industry, agriculture, animal husbandry, dwelling house, plantation for fencing.
Stainless Steel Wire Cloth, Dutch Weave
Mesh Wire Dia. (MM) Material (AISI)
12mesh x 64mesh 0.58 x 0.40 304 or 316
24mesh x 110mesh 0.36 x 0.25 304 or 316
14mesh x 88mesh 0.50 x 0.33 304 or 316
30mesh x 150mesh 0.23 x 0.18 304 or 316
40mesh x 200mesh 0.18 x 0.13 304 or 316
50mesh x 250mesh 0.14 x 0.11 304 or 316
80mesh x 700mesh 0.10 x 0.08 304 or 316
165mesh x 800mesh 0.071 x 0.040 304 or 316
165mesh x 1400mesh 0.06 x 0.04 304 or 316
200mesh x 1800mesh 0.05 x 0.032 304 or 316
825mesh x 2300mesh 0.035 x 0.025 316L
400mesh x 2800mesh 0.030 x 0.02 316L
1 Sizes: From 0.3mm to 6.0mm
2 Standard: BS443/BS1442 EN10257/EN10244 ASTMA411/ASTMA111
3 Packing: In coil only; Two coils on one wooden pallet; Steel/plastic spool.
4 Coil weight: 25kg to 1000kg
5 Monthly production capacity: 1500MT.
1)Packed in coil: Coil weight from 50kgs to 800kgs
2)Packed in plastic reel: Each reel is about 25kgs-40kgs
3)Packed in coil with steel hook and palletized.
Materials of Stainless Steel Wire : 301,301L, 302, 302L, 304, 304L, 316, 316L.
Sizes available of Stainless Steel Wire : wire diameter from 5mm to 0.025mm
Stainless Steel Wire application: Stainless Steel Wire is used in a number of industries including wire-drawing, weaving of wire mesh, soft pipe, beam of cabinet, steel wire rope, filter material and equipment, spring, textile, etc..
Iron Wire is the foundation of other wire and wire mesh products. It could covered with other metal material,such as zinc,PVC and PE.
Without the surface anti-corrosion material, Iron Wire would got rust very easily, so in order to strength its anti-corrosion, we could dip it in the oil or pack it with plastic inside and gunny outside.
Global overseas group corp., ltd had set up a joint venture company with sket pc strand factory since 1995,
Specialized in producing and exporting pc strand to more than 40 countries as following:
1).Standard: astm a416, bs5896, jisg3536, iso6934, en10138, gb/t5224 or according to customers' requirements.
2).Size range (mm): 9.3, 9.53, 12.7, 15.0, 15.2, 15.24, 15.7
3) packing: export anti-rust packing with vapors corrosion inhibiting technology.
Global Overseas Group Corp.,Ltd had set up a joint venture company with SKET pc strand factory since 1995,
specialized in producing and exporting PC Strand to more than 40 countries as following:
1).Standard: ASTM A416, BS5896, JISG3536, ISO6934, EN10138, GB/T5224 or according to customers' requirements.
2).Size range (mm): 9.3,9.53,12.7,15.0,15.2,15.24,15.7
3) Packing: Export anti-rust packing with vapors corrosion inhibiting technology.
Wire materials: type 304, type 304 l, type 316 and type 316 l.
Type 304 often refers to as "18-8" (18% chromium, 8% nickel ). T-304 is the basic stainless alloy mostly commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 degrees fahrenheit. Type 304 l is very similar to t-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics.
Type 316: stabilized by the addition of 2% molybdenum, t-316 is an "18-8" alloy. Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulfur-bearing water or halogen salts, such as chlorides are present. Type 316 l: type 316 l is very similar to t-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics
