Stainless steel mesh with various materials, fencing mesh, petroleum vibrating mesh, fiberglass cloth, u-shaped wire, pvc coated wire as well as 1-2 meter perforated mesh and expanded wire mesh.
We can produce : Stainless Steel Wire/Stainless Steel Microwire, Stainless Steel Fiber/ Stainless Steel Fibre, Stainless Steel Wire Rope, Stainless Steel Welding Wire / Welding bar / rod etc.
1. Material Grade:316L, 302, 304, 430, 201, 202, etc
2. Size: 0.008 to 6 mm
3. Weight per coil: 50 to 600kg
Some material grades of stainless steel wire brief intoduction:
Type 302 stainless steel wire is a general purpose stainless alloy typically composed of 18% chromium and 8% nickel. It is the most widely used stainless spring wire because of its high corrosion resistance properties and good tensile strength. For spring applications it is generally furnished in the cold drawn condition. Type 302 springs have good strength at moderate temperatures. If properly treated after forming they will set less than most other spring materials at temperatures up to 500ºF. Type 302 material in the spring condition is slightly magnetic due to the transformation of some martinsite in the drawing operation. The greater the amount of cold reduction the higher the degree of magnetism. Gibbs soap coated Type 302 stainless steel wire is available in the size range 0.014" to 0.625". All wire conforms to ASTM-A-313 and AMS-5688.
Similar in composition to Type 302, Type 316 stainless steel wire has a slightly higher nickel content and 2-2.50% molybdenum giving this alloy better corrosion resistance. Type 316's tensile strength is 10-15% lower than that of Type 302, and the alloy is slightly less magnetic in the spring temper than Type 302. With its superior cold working properties, it can be used for severe cold forming operations and exhibits short time tensile and creep strength properties at elevated temperatures. Gibbs Type 316 stainless steel wire is coated for coiling and is available in the range 0.015" - 0.625" conforming to ASTM A 313. Nickel coated available on application in size range 0.007" to 0.130"
2104 Steel Wires Suppliers
Short on time? Let Steel Wires sellers contact you.
Hot-dip galvaning is a process in which the wire is dipped in zinc to create a zinc coating. Hot-dip galvanized steel wire has the advantages of corrosion resistance, good weather-resistance and long life, so it is widely used in many fields.
The requirements for hot-dip galvanized steel wire are as follows:
1. Uniform galvanized layer: The galvanized layer of hot-dip galvanized steel wire should be uniform and dense, without defects such as uneven galvanizing, wrinkling, and falling off.
2. The thickness of the zinc layer is appropriate: the thickness of the zinc layer of the hot-dip galvanized steel wire should meet the standard requirements to ensure its corrosion resistance.
3. Good surface: The surface of hot-dip galvanized steel wire should be smooth, without obvious burrs and oxides.
4. Strong adhesion of galvanized layer: The galvanized layer of hot-dip galvanized steel wire should have good adhesion and not easy to peel off.
5. The chemical composition of galvanized steel wire is stable: the chemical composition of hot-dip galvanized steel wire should meet the relevant standards to ensure its quality stability.
6. The size of the galvanized steel wire is accurate: the diameter, strength and other dimensional parameters of the hot-dip galvanized steel wire should meet the standard requirements to ensure its performance.
In short, the requirement of hot-dip galvanized steel wire is to ensure that its galvanized layer has good quality and stable performance, so as to improve its corrosion resistance and life.
size: 0.4-4.0mm
Coil wight: 25kg,50kg,100kg or as customer's request
Package:plastic film inside, hessiaon cloth outside or plastic film inside, weaving bag outsideand
Materials: Low Carbon Steel Q195 wire rod
Process: Wire Rod �¢?? Drawn Wire �¢?? Annealed �¢?? Acid Washing �¢?? Galvanized �¢?? Wire Coiling
Usage: mainly used in construction, handicrafts, weaving nets, communications equipment, medical equipment and
brushes, cables, filters, high pressure pipe industry.
Material: 45#- 75#,77B,Q235 etc
Dia: 1.0mm-6.0mm
Zinc coating :100g/m2 - 800g/m2 Grade A/ B /C�£??
Breaking strength:350mpa-2200mpa
Steel wire (dia:1.0mm-7.0mm ) for ACSR,preformed line products and so on.
Standard: ASTM B 498,ASTM A 411 AS 3863,BS 4565 ,JIS G 3548 ,EN 10264
we can offer high-quality products with good and smooth surface,no joints, uniform and continuous coating,free from imperfections not consistent with good commercial practice.The zinc coating can be up to 800g/m2 for 3.0meter. We can also provide galvanized wire to meet the specific requirements of our customers.
Material:45#- 75#,77B,Q235etc
Dia: 1.0mm-6.0mm
Constructions :1X3, 1X7 ,1X19,1X37
Zinc coating :100g/m2 - 800g/m2 Grade A/ B /C ?
Breaking strength:350mpa-2200mpa
YB/T 5004-2001, GB/T 3428-2002,CAN/CSA-G12,BS 183/BS443,BS EN 10244,ASTM A 475,ASTM A 363
Its widely used in domestic & abroad power, cable, telecommunication, broadcast and television industries. We can produce very heavy zinc thickness steel wire,for example 800 g/m2 for 3.00mm.
Packaging Details: water-proof paper on drums or in coils
Delivery Time: 20 days after confirmed order Payment Terms: L/C,T/T
Grades Utilities, Common, Siemens-Martin, High Strength and Extra High Strength
Finish Coatings Class A, B and C
Specifications
ASTM A925 -5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
ASTM A855 Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
Galfan a superior corrosive coating of 5% Aluminum and 95% Zinc.
We can offer high-quality products with good and smooth surface,no joints, uniform and continuous coating,free from imperfections not consistent with good commercial practice.The zinc coating can be up to 800g/m2 for 3.0meter. We can also provide galvanized wire to meet the specific requirements of our customers.
Place of Origin: Hebei Province, China
Manufacturer: Honorwin
Wire diameter: 1.6mm or more
MOQ: Two tons
Sales Scope: Worldwide
Support shipping method: sea
The quality of the galvanized layer can be evaluated by the weight of the zinc plated on the substrate, the bonding force between the galvanized layer and the substrate, and the uniformity of the coating. The uniformity of the zinc layer is an important quality indicator of the zinc coating. In general, the corrosion always starts at the thinnest part of the zinc layer and spreads around, resulting in rust, broken wires and affecting the service life. For the coating weight and bonding strength, each standard has clear regulations, but the uniformity is different. In the 1970s, the ISO standard and the standards of various countries in the world generally stipulated that the copper sulfate test should be used for inspection. By the 1980s, with the exception of Japan and the former Soviet Union, ISO standards and standards around the world no longer adopted this method. Although our country has retained this method in some standards such as GB/T15393-94 "Steel wire galvanized layer" in the form of "can be carried out by mutual agreement", most of them are no longer adopted. However, the old zinc coating uniformity detection method has been abandoned but no corresponding new methods have been established. In addition, there is no uniform definition and requirement for uniformity, so that some producers do not monitor and detect the uniformity of the coating well. , So as to affect the further improvement of product quality
Cemented carbide wire drawing dies is a special and precision tool which cuts and forms sheet metal into a desired shape or profile. The cutting and forming sections of dies typically are made from special types of hard steel called tool steel. Dies also can contain cutting and forming sections made from carbide or various other hard, wear-resistant materials.
Wire Cut EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance.
Specification
Wire Cut EDM, also known as (wire electrical discharge machining or wire EDM) is a high-precision method for cutting nearly any electrically conductive material. A thin, electrically-charged EDM wire held between upper and lower mechanical guides forms one electrode, while the material being cut forms the second electrode. Electrical discharge between the wire and the workpiece creates sparks that rapidly cut away materials.
Application of Wire Cut EDM:
The wire cut EDM is suit to cut the metal stamping mould, plastin mould, super abrasive materials, precious metals and cutting sheets, gear cutter hob, mechanical parts processing ,etc
EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance
Advantages of Wire Cut EDM:
* The process is burr-free, distortion-free and can be used to machine exotic materials which are work-hardened, ductile or brittle.
* High Precision. It is capable of making cuts that match your designs within �± 0.0001â??.
* Less set up time. EDM manufacturing reduces the need for tooling, which in turn lessens the amount of time that it takes to set up.
* Tapers. EDM machining is useful for cutting long tapers that other machining methods cannot produce.
* Accurate internal cuts. Square-edged internal cuts are difficult to produce with other machining methods, but Wire EDM makes it possible.
* Fine hole drilling. EDM drilling is capable of producing tiny holes that are difficult to produce with other methods.
Wire Cut EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance.
Specification
Wire Cut EDM, also known as (wire electrical discharge machining or wire EDM) is a high-precision method for cutting nearly any electrically conductive material. A thin, electrically-charged EDM wire held between upper and lower mechanical guides forms one electrode, while the material being cut forms the second electrode. Electrical discharge between the wire and the workpiece creates sparks that rapidly cut away materials.
Application of Wire Cut EDM:
The wire cut EDM is suit to cut the metal stamping mould, plastin mould, super abrasive materials, precious metals and cutting sheets, gear cutter hob, mechanical parts processing ,etc
EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance
Advantages of Wire Cut EDM:
* The process is burr-free, distortion-free and can be used to machine exotic materials which are work-hardened, ductile or brittle.
* High Precision. It is capable of making cuts that match your designs within �± 0.0001â??.
* Less set up time. EDM manufacturing reduces the need for tooling, which in turn lessens the amount of time that it takes to set up.
* Tapers. EDM machining is useful for cutting long tapers that other machining methods cannot produce.
* Accurate internal cuts. Square-edged internal cuts are difficult to produce with other machining methods, but Wire EDM makes it possible.
* Fine hole drilling. EDM drilling is capable of producing tiny holes that are difficult to produce with other methods.
Tianjin Zhongyou Metal Product Co.,Ltd is professional manufacturer with many years experience on metal wire.Founded in 1985, we have produced and exported galvanized
Mainline Floating Hose are oil hose that can adapt to the complex working conditions of the sea and the coast, and are used for ship-to-ship and ship-to-shore oil transfer loading and unloading.
