403 stainless steel pipe is a brand of stainless steel produced according to the American ASTM standard 403 is equivalent to 1Cr12 stainless steel pipe, containing 0.01% carbon and 12% chromium 403 stainless steel pipes belong to the international stainless steel labeling method. 403 stainless steel pipe--S40300 (American AISI, ASTM) 403 corresponds to the Chinese grade is 1Cr12 403 stainless steel is a martensitic stainless steel that contains chromium, which provides it with excellent corrosion resistance properties. It is a heat-treatable alloy that can be hardened to achieve high strength and hardness levels. However, its corrosion resistance is lower compared to other stainless steel grades such as 304 and 316. Some of the key properties of 403 stainless steel include: Corrosion resistance: 403 stainless steel offers good corrosion resistance in mild environments, but its corrosion resistance is not as good as other austenitic stainless steel grades. Heat resistance: 403 stainless steel has good heat resistance and can be used at temperatures up to 649�°C (1200�°F). Hardness and strength: 403 can be heat treated to achieve high levels of hardness and strength. Machinability: 403 has good machinability in the annealed condition, but it can be difficult to machine in its hardened state. Some of the common applications for 403 stainless steel include: Pump shafts Valve parts Cutlery Surgical instruments Machine parts Overall, 403 stainless steel is a heat-treatable alloy that offers good corrosion resistance in mild environments and is well-suited for applications that require high strength and hardness. However, it is not recommended for use in corrosive environments or applications that require high resistance to pitting and crevice corrosion. Here are some of the most common international standards for 403 stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications. ASTM A276: Standard Specification for Stainless Steel Bars and Shapes. ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels. EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes. JIS G4304: Hot-rolled stainless steel plate, sheet and strip. GB/T 3280: Cold rolled stainless steel plate, sheet and strip. We can provide the following the form:403 stainless steel coil; 403 stainless stee strip;403 stainless stee plate; 403 stainless steel sheets; 403 stainless steel tubes; 403 stainless steel pipe; Good stainless and heat-resistant steel for steam turbine blades and high-stress components.
904L (N08904, 1.4539) super austenitic stainless steel contains 14.0-18.0% chromium, 24.0-26.0% nickel and 4.5% molybdenum. 904L super austenitic stainless steel is a low carbon high nickel, molybdenum austenitic stainless acid resistant steel. It has very good activation-passivation transformation ability, excellent corrosion resistance, good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid, phosphoric acid, and good corrosion resistance in neutral chloride ion-containing media. Excellent pitting corrosion resistance, good crevice corrosion resistance and stress corrosion resistance. It is suitable for sulfuric acid of various concentrations below 70�¯�¿�½?�?�°C, and has good corrosion resistance against acetic acid of any concentration and temperature under normal pressure, and the mixed acid of formic acid and acetic acid. Here are some of the most common international standards for 904L stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes ASTM B625/B625M: Standard Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip EN 1.4539: European standard for austenitic stainless steel with high molybdenum content EN 10028-7: Flat products made of steels for pressure purposes - Part 7: Stainless steels EN 10216-5: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes EN 10217-7: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes JIS G4304: Hot-rolled stainless steel plate, sheet and strip JIS G4305: Cold-rolled stainless steel plate, sheet and strip JIS G4312: Heat-resisting steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip GB/T 4237: Hot rolled stainless steel plate, sheet and strip GB/T 24511: Stainless steel and heat-resisting steel plate, sheet and strip for pressure equipments We can provide the following form:904L stainless steel coil; 904L stainless stee strip;904L stainless stee plate; 904L stainless steel sheets; 904L stainless steel tubes; 904L stainless steel pipe;904L stainless steel flat; 904L stainless steel bar
309S stainless steel is a highly corrosion-resistant austenitic stainless steel that contains a high amount of chromium and nickel. It also has a low carbon content, which gives it excellent resistance to high-temperature oxidation and sulfidation. Some of the key properties of 309S stainless steel include: High-temperature resistance: 309S can withstand high temperatures up to 980�°C (1800�°F) without losing its strength or corrosion resistance properties, making it ideal for use in applications such as furnace parts, heat exchangers, and kilns. Corrosion resistance: 309S offers excellent resistance to oxidation, sulfidation, and other forms of high-temperature corrosion, as well as resistance to aqueous corrosion. Strength and toughness: 309S has good strength and toughness, making it suitable for use in demanding applications. Fabricability: 309S is easily formable using standard methods, and can be welded using common welding techniques. 309S stainless steel is commonly used in a range of high-temperature applications, including: Furnace parts, such as burners, heating elements, and retorts Heat exchangers and boilers Kilns and other high-temperature processing equipment Chemical processing equipment Power generation equipment, such as gas turbines and exhaust systems Overall, 309S stainless steel is a highly reliable and versatile material that is well-suited for use in a range of high-temperature applications where superior corrosion resistance and strength are required. The following are some of the commonly used international standards for 309S stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 10095: Heat resisting steels and nickel alloys JIS G4304: Hot-rolled stainless steel plate, sheet and strip JIS G4305: Cold-rolled stainless steel plate, sheet and strip GB/T 4237: Hot rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following form:309S stainless steel coil; 309S stainless stee strip;309S stainless stee plate; 309S stainless steel sheets; 309S stainless steel tubes; 309S stainless steel pipe; 309S stainless steel flat; 309S stainless steel bar
Incoloy alloy 825 is a nickel-iron-chromium alloy with molybdenum, copper, and titanium added to enhance its corrosion resistance in highly oxidizing and reducing environments. It has excellent resistance to both reducing and oxidizing acids, stress-corrosion cracking, and pitting and crevice corrosion. It is also highly resistant to corrosion caused by chloride ions and sulfide stress cracking. The alloy has good mechanical properties and can be easily fabricated and welded. Incoloy alloy 825 is often used in chemical processing, pollution control equipment, oil and gas recovery, acid production, and nuclear fuel reprocessing industries. It is available in various forms such as pipes, tubes, plates, sheets, bars, wire, and forgings. The alloy can be further customized based on customer requirements for specific applications. Trade names: UNS N08825 W.Nr. 2.4858 Standards: United States: ASTM B423, ASTM B424, ASTM B425, ASTM B564, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829, ASME SB423, ASME SB424, ASME SB425, ASME SB564, ASME SB704, ASME SB705, ASME SB751, ASME SB775, ASME SB829 Europe: EN 10028-7, EN 10088-2, EN 10216-5, EN 10217-7, EN 10272, EN 10296-2, EN 10297-2, EN 10298-2, EN 10222-2, EN 10263-4, EN 10272, EN 10302, EN 10312, EN 10357, EN 1092-1, EN 1092-2, EN 1092-3, EN 1092-4, EN 1092-5, EN 1759-1, EN 1759-2, EN 1759-3, EN 10204, PED 2014/68/EU Germany: DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17753, DIN 17754, DIN 17756, DIN 17758, DIN 17858 France: NF A 49-311, NF A 49-321, NF A 49-322, NF A 49-324, NF A 49-325 United Kingdom: BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA16, ASTM B423, ASTM B424, ASTM B425, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829 Japan: JIS G3101, JIS G3103, JIS G3120, JIS G3141, JIS G3161, JIS G3163, JIS G3192, JIS G3193, JIS G3201, JIS G3214, JIS G3221, JIS G3311, JIS G3445, JIS G4051, JIS G4303, JIS G4304, JIS G4305, JIS G4308, JIS G4309, JIS G4318, JIS G4320, JIS G4321, JIS G4801, JIS G4805, JIS G4808, JIS G5101, JIS G5121, JIS G5151, JIS G5152, JIS G5501, JIS G5502, JIS G5510, JIS G5511, JIS G5512, JIS G5521, JIS G5523, JIS G5525, JIS G5528, JIS G5702, JIS G8031 We can provide the following the form:Incoloy alloy825 coil; Incoloy alloy 825 strip;Incoloy alloy 825 plate; Incoloy alloy 825 sheets; Incoloy alloy 825 tube; Incoloy alloy 825 pipe;Incoloy alloy 825 flat; Incoloy alloy 825 bar BS:3072/NF:A 49-311/UNS:N08825/W.Nr:2.4858 Refining and Chemical Processes Distiller chemical reactor Hydrogen Chloride Hydrogenation Reactor Marine Engineering Nuclear Fuel Reprocessing Equipment
Monel 400 (UNS N04400, NCu30) The structure of Monel 400 alloy is a high-strength single-phase solid solution. It is a corrosion-resistant alloy with the largest amount, the widest application and excellent comprehensive performance. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, and also has excellent corrosion resistance to hot concentrated lye. At the same time, it is also resistant to corrosion by neutral solutions, water, sea water, atmosphere, organic compounds, etc. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. The alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives. At the same time, it is more corrosion resistant than copper-based alloys in seawater. â?² Acid medium: M400 is corrosion-resistant in sulfuric acid with a concentration of less than 85%. M400 is one of the very few important materials in durable hydrofluoric acid. â?² Water corrosion: M400 alloy not only has excellent corrosion resistance under most water corrosion conditions, but also pitting corrosion and stress corrosion are rarely found, and the corrosion rate is less than 0.25mm/a. â?² High temperature corrosion: The maximum temperature of M400 continuous work in the air is generally around 600�°C, and in high temperature steam, the corrosion rate is less than 0.026mm/a. â?² Ammonia: Due to the high nickel content of Monel 400 alloy, it can resist corrosion under anhydrous ammonia and ammoniation conditions below 585�°C. American standard designation: UNS N04400, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544. German standard designation: W.Nr. 2.4360, Specifications: DIN 17743, DIN 17750, DIN 17752, DIN 17753, DIN 17754. Japanese standard designation: JIS NW4400, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061. We can provide the following the form:Monel alloy 400 coil; Monel alloy 400 strip;Monel alloy 400 plate; Monel alloy 400 sheets; Monel alloy 400 tube; Monel alloy 400 pipe;Monel alloy 400 flat; Monel alloy 400 bar GB:NS111;JIS:NW4400;UNS:N04400;W.Nr:2.436 This alloy is mainly used for 1. Seamless water pipes and steam pipes in power plants 2. Sea water exchanger and evaporator 3. Sulfuric acid and hydrochloric acid environment 4. Crude oil distillation 5. The pump shaft and propeller of the equipment used in seawater 6. The nuclear industry is used to manufacture equipment for uranium refining and isotope separation 7. Manufacture of pumps and valves used in the production of hydrochlo
Incoloy alloy 925 is a precipitation-hardenable nickel-iron-chromium alloy that contains additions of molybdenum, copper, titanium, and aluminum. The alloy has excellent mechanical properties at both ambient and elevated temperatures, making it suitable for use in a wide range of applications, including sour gas and oil production, aerospace, chemical processing, and marine engineering. Incoloy alloy 925 is known for its high strength, which is achieved through a combination of solid solution strengthening and precipitation hardening. It also exhibits excellent resistance to corrosion and oxidation in a variety of environments, including those containing sulfides and chlorides. The addition of molybdenum and copper to the alloy improves its resistance to pitting and crevice corrosion, while the titanium and aluminum additions enhance its resistance to intergranular attack. The combination of these elements makes Incoloy alloy 925 highly resistant to stress corrosion cracking and hydrogen embrittlement. The alloy is typically supplied in the solution annealed condition, and can be easily fabricated using common techniques such as welding, brazing, and machining. After fabrication, the alloy can be precipitation hardened to achieve its maximum strength. Incoloy alloy 925 is available in a range of forms, including round bars, flat bars, forgings, and wire. It is also available in various sizes and dimensions to meet the specific needs of different applications. Overall, Incoloy alloy 925 is a versatile and high-performance alloy that offers excellent strength, corrosion resistance, and durability in demanding applications. The international standard designations for Incoloy alloy 925 include UNS N09925 and W.Nr. 2.4858. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan. Here are the specific standards and designations for Incoloy alloy 925 in different countries: United States: AMS 5660, AMS 5661, AMS 5662, AMS 5663, AMS 5664, AMS 5672, AMS 5872, ASTM B408, ASTM B805, UNS N09925 Germany: DIN 17742, DIN 17753, DIN 17754, W.Nr. 2.4858 United Kingdom: BS 3076, BS HR 6 Europe: EN 10095, EN 10204-3.1 Japan: JIS G4902, JPI-SB46 We can provide the following the form:Incoloy alloy925 coil; Incoloy alloy925 strip;Incoloy alloy925 plate; Incoloy alloy925 sheets; Incoloy alloy925 tube; Incoloy alloy925 pipe;Incoloy alloy925 flat; Incoloy alloy925 bar Incoloy alloy 925 has a wide range of applications in various industries, including: Oil and Gas Industry: Incoloy alloy 925 is widely used in oil and gas industry due to its high strength, excellent corrosion resistance, and resistance to sulfide stress cracking in sour environments. It is used in various components of downhole tools, such as subsurface safety valves, tubing hangers, and packers.
304L stainless steel is a low-carbon variation of the widely used 304 austenitic stainless steel alloy. It contains approximately 18% chromium and 8% nickel and is characterized by its good corrosion resistance, high-temperature strength, and excellent weldability. The "L" in its name stands for low carbon, indicating that it has a lower carbon content than standard 304 stainless steel. The low carbon content of 304L stainless steel provides it with improved resistance to intergranular corrosion and improved weldability, particularly in applications where it may be subject to sensitization, which can cause intergranular corrosion in certain environments. 304L stainless steel is commonly used in applications that require good corrosion resistance and high-temperature strength, including chemical processing equipment, food processing equipment, and heat exchangers. It is also used in architectural trim, dairy and brewery equipment, and pharmaceutical processing equipment. In terms of mechanical properties, 304L stainless steel has a minimum tensile strength of 485 MPa (70 ksi) and a minimum yield strength of 170 MPa (25 ksi), making it suitable for use in applications where high strength is required. Its elongation is typically around 40%, which allows it to be formed and shaped without cracking or breaking. 304L stainless steel can be easily formed and fabricated using a variety of techniques, including cold and hot working, machining, and welding. It can also be polished and finished to achieve a variety of surface textures and appearances. Overall, 304L stainless steel is a low-carbon variation of the widely used 304 stainless steel alloy that offers good corrosion resistance, high-temperature strength, and excellent weldability, making it a versatile material for a wide range of applications. American Standard: ASTM A240/A240M-20a European Standard: EN 10088-2:2005 Japanese Standard: JIS G4304-2005 Chinese Standard: GB/T 3280-2015 Indian Standard: IS 6911:2017 Here are some of the most common international standards for 304L stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes JIS G4304: Hot-rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following form:304L stainless steel coil/strip/plate/sheets/tubes/pipe/flat/bar
Incoloy Alloy 907 is a high-strength, high-temperature alloy mainly composed of nickel, chromium, iron, molybdenum, niobium and other elements. It has excellent corrosion resistance, oxidation resistance and creep resistance, and is widely used in aviation, energy, chemical and other fields. The following is the detailed introduction of Incoloy Alloy 907: performance: Corrosion resistance: Incoloy Alloy 907 has good corrosion resistance in various environments such as acid, alkali and salt. Oxidation resistance: Incoloy Alloy 907 has good oxidation resistance at high temperature, and can resist oxidation, thermal corrosion and high temperature oxidation. Creep resistance: Incoloy Alloy 907 has good creep resistance under high temperature and high stress. Processability: Incoloy Alloy 907 can be processed by various processing methods, such as forging, heat treatment, cold working, hot rolling, etc. The international standard designations for Incoloy alloy 907 include UNS N19907 and W.Nr. 2.4663. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan. Here are the specific standards and designations for Incoloy alloy 907 in different countries: United States: AMS 5541, AMS 5542, AMS 5544, AMS 5548, ASTM B366, ASTM B408, UNS N19907 Germany: DIN 17750, DIN 17752, DIN 17753, DIN 17754, W.Nr. 2.4663 United Kingdom: BS HR 505 Europe: EN 10095 Japan: JIS H4551, JPI-SB46 We can provide the follwoing the form:Incoloy alloy907 coil; Incoloy alloy907 strip;Incoloy alloy907 plate; Incoloy alloy907 sheets; Incoloy alloy907 tube; Incoloy alloy907 pipe;Incoloy alloy907 flat; Incoloy alloy907 bar BS:HR 505/JIS:NW4894/UNS:N19907/W.Nr:2.4669 Incoloy Alloy 907 is widely used in aviation, energy, chemical and other fields, such as: Heat treatment equipment and furnaces in high temperature oxidation environment Components of turbine engines and jet engines in aerospace Reactors, distillation towers and other components of chemical equipment Fuel elements in the nuclear industry, reactor internal structures, etc. It should be noted that when selecting and using Incoloy Alloy 907, it needs to be confirmed according to the specific situation and comply with local standards and regulations.
Incoloy Alloy 909 is a high-temperature high-strength alloy, which is a kind of nickel-based alloy. It contains nickel, iron, chromium, molybdenum, cobalt and other elements, and added traces of carbon, aluminum, titanium, zirconium and other elements. Incoloy Alloy 909 has excellent high temperature performance, high strength and corrosion resistance, and has good stability and durability in high temperature and corrosive environments, so it is widely used in aerospace, nuclear energy, chemical, petrochemical, medical equipment and other fields . Key features and benefits of Incoloy Alloy 909 include: High-temperature performance: Incoloy Alloy 909 can still maintain high strength and good stability in high-temperature environments, and can be used for a long time in high-temperature environments around 1100�°C. Corrosion resistance: Incoloy Alloy 909 has excellent corrosion resistance, can withstand the corrosion of most organic acids, alkaline solutions and salt water, and also has a certain resistance to hydrogen corrosion. High strength: Incoloy Alloy 909 has excellent strength and can maintain its mechanical properties under high temperature and high stress environment. Ease of processing: Incoloy Alloy 909 is easy to process and shape, and can be processed by brazing, arc welding, and TIG welding. The international standard designations for Incoloy alloy 909 include UNS N19909 and W.Nr. 1.4884. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan. Here are the specific standards and designations for Incoloy alloy 909 in different countries: United States: AMS 5884, AMS 5885, AMS 5886, AMS 5891, ASTM B408, UNS N19909 Germany: DIN 17752, DIN 17753, DIN 17754, W.Nr. 1.4884 United Kingdom: BS HR 6 Europe: EN 10095 Japan: JIS H4551, JPI-SB46 We can provide the following the form:Incoloy alloy909 coil; Incoloy alloy909 strip;Incoloy alloy909 plate; Incoloy alloy909 sheets; Incoloy alloy909 tube; Incoloy alloy909 pipe;Incoloy alloy909 flat; Incoloy alloy909 bar BS:HR 6/JIS:NCF 909/UNS:N19909/W.Nr:1.4884
Inconel722 is an alloy composed of nickel as the base and other elements. It is a kind of nickel-chromium alloy, nickel-iron alloy, nickel-copper alloy and nickel-molybdenum alloy. Nickel has good mechanical, physical and chemical properties, adding appropriate elements can improve its oxidation resistance, corrosion resistance, high temperature strength and improve some physical properties. It has excellent corrosion resistance and oxidation resistance, has good tensile properties and fatigue properties from low temperature to 980 �°C, and is resistant to stress corrosion in salt spray atmosphere. Here are the standard grades and specifications for Inconel 722: American standard grade: UNS N07722 Specifications: AMS 5541: Standard specification for hot-rolled Inconel 722 plate, sheet, and strip. AMS 5714: Standard specification for Inconel 722 bars and forgings. ASTM B637: Standard specification for nickel alloy bars and forgings. ASME SB-637: Same as above. European standard grade: NiCr21Mo14W (2.4858) Specifications: EN 10095: Technical delivery conditions for hot rolled and forged stainless steel and heat-resisting steel and heat-resisting steel materials. EN 10269: Technical delivery conditions for high-temperature and corrosive environments. EN 10204: Standard specification for type, batch, and grade certificates for metal products. EN 10302: Technical delivery conditions for hot-rolled, forged, and cold-drawn nickel alloy bars. Japanese standard grade: - Specifications: JIS G4902, JIS G4903 Chinese standard grade: GH4220 Specifications: GB/T 14992: Standard specification for seamless and welded nickel alloy tubes. GB/T 14994: Standard specification for nickel alloy forgings. GB/T 12771: Standard specification for seamless steel tubes and welded steel tubes for hydraulic transmission. These specifications define the chemical composition, physical properties, processing, and testing requirements for Inconel 722 materials to ensure that their quality and performance meet the requirements. We can provide the following the form:Inconel722 alloy coil; Inconel722 alloy strip;Inconel722alloy plate; Inconel722 alloy sheets; Inconel722alloy tube; Inconel722 alloy pipe;Inconel722 alloy flat; Inconel722 alloy bar EN:NiCr21Mo14W;JIS:G4902;UNS:N07722;W.Nr:2.4858 1. Heat treatment industry. Such as furnace rollers, bell furnaces and annealing furnaces. 2. Calciner. For example, it can be used to calcinate high-performance corundum, calcinate chromite to produce ferrochrome alloy, and recover nickel used as a catalyst in petrochemical industry. 3. Chemical industry and petrochemical industry, use it to prepare new steam cracking naphtha furnace to produce hydrogen, etc. 4. Automatic device. Such as catalytic support system, spark plug. 5. Cleaning equipment for nuclear industry, such as nuclear waste removal. 6. Steel industry. Such as direct reduction of iron ore process to produce sponge titanium
Incoloy Alloy 926 is a super-austenitic nickel-based alloy with high levels of molybdenum, nitrogen, and chromium. It is known for its excellent corrosion resistance in a variety of challenging environments, including sulfuric acid, hydrochloric acid, and seawater. Here is a detailed introduction to Incoloy Alloy 926 and its applications: Incoloy alloy 926 is a super-austenitic nickel-based alloy with high corrosion resistance and excellent mechanical properties at high temperatures. It has a chemical composition of 22% chromium, 25% molybdenum, 6% tungsten, and 0.5% nitrogen, with nickel and iron making up the balance. The alloy also contains small amounts of copper and titanium. Incoloy alloy 926 is known for its excellent resistance to a wide range of corrosive environments, including chloride ion stress-corrosion cracking and pitting and crevice corrosion. It also has good resistance to sulfuric acid and phosphoric acid, as well as seawater and brine solutions. The alloy's high nickel and molybdenum content provides excellent resistance to reducing environments, while its chromium content enhances its resistance to oxidizing environments. In terms of mechanical properties, Incoloy alloy 926 exhibits high strength and toughness, along with excellent weldability and formability. It can be fabricated using a variety of techniques, including hot and cold working, machining, and welding. Due to its excellent corrosion resistance and mechanical properties, Incoloy alloy 926 is commonly used in a variety of industries, including chemical processing, oil and gas, nuclear, marine, and desalination. It is often used in applications involving sour gas environments, such as in the production of oil and gas, as well as in heat exchangers, pressure vessels, and piping systems. The international standards and specifications for Incoloy alloy 926 are as follows: United States: ASTM B649, AMS 5737, AMS 5853, UNS N08926 Europe: EN 1.4529, SEW 400 Germany: DIN 17752, DIN 17754, DIN 17750, W.Nr. 1.4529 We can provide the following the form:Incoloy alloy926 coil; Incoloy alloy926 strip;Incoloy alloy926 plate; Incoloy alloy926 sheets; Incoloy alloy926 tube; Incoloy alloy926 pipe;Incoloy alloy926 flat; Incoloy alloy926 bar BS:NA 25/JIS:SUS 890L/UNS:N08925/W.Nr:1.4529
Incoloy Alloy 890 is a high-performance corrosion-resistant alloy that belongs to the chromium-nickel-molybdenum series of alloys. It is mainly composed of nickel, chromium, molybdenum, iron, and copper. This alloy has excellent corrosion resistance in various corrosive environments such as acids, alkalis, and salt solutions. Incoloy Alloy 890 offers high mechanical strength and toughness, good weldability, and ease of fabrication. It is resistant to stress corrosion cracking, pitting, and crevice corrosion, making it suitable for use in harsh and demanding applications in industries such as chemical processing, oil and gas, and marine engineering. The chemical composition of Incoloy Alloy 890 typically includes 26-30% nickel, 19-23% chromium, 4-5% molybdenum, 1.5-3% copper, 0.3% maximum carbon, 2.0% maximum manganese, and 0.5% maximum silicon. It may also contain small amounts of other elements such as nitrogen, phosphorus, and sulfur. In terms of mechanical properties, Incoloy Alloy 890 has a tensile strength of 620 MPa and a yield strength of 300 MPa at room temperature. Its elongation at break is 50% minimum. The alloy also has good impact strength and fatigue resistance at both room temperature and elevated temperatures. Incoloy Alloy 890 can be heat-treated to enhance its mechanical properties. Annealing at 1093-1204�°C for 30 minutes per 25mm of thickness followed by rapid air cooling can improve the alloy's toughness and ductility. Solution annealing at 1093-1177�°C followed by rapid water quenching can improve its corrosion resistance and high-temperature strength. Overall, Incoloy Alloy 890 is a versatile and high-performance alloy that can withstand corrosive environments and harsh operating conditions. Its excellent properties make it suitable for use in various industrial applications where high strength and corrosion resistance are required. The following are the execution standards of Incoloy alloy 890 in various countries: US: AMS 5837, AMS 5598, AMS 5666, AMS 5839, ASTM B366, ASTM B408, ASTM B425, ASTM B564, ASTM B751, ASTM B775, ASTM B829, UNS N08890 Europe: EN 10095 Germany: DIN 17742, DIN 17750, DIN 17754 UK: BS 3076 Japan: JIS G4902 China: GB/T 14992 We can provide the following the form:Incoloy alloy890 coil; Incoloy alloy890 strip;Incoloy alloy890 plate; Incoloy alloy890 sheets; Incoloy alloy890 tube; Incoloy alloy890 pipe;Incoloy alloy890 flat; Incoloy alloy890 bar GB:GH89/JIS:G4303/UNS:N008904/W.Nr:1.4539 Manufacture of chemical equipment such as heat exchangers, reactors, and evaporators. Applications in the petroleum extraction and refining industry, such as drill bits, casings, pumps, and valves. High-temperature components in the aerospace industry, such as turbine disks, turbine blades, and combustion chamber components in jet engines. Reactors and equipment in the pharmaceutical industry, as well as other equipment and components in high-temperature and corrosive environments.
Incoloy alloy 945 is a high-strength, corrosion-resistant nickel-iron-chromium alloy. It is primarily composed of nickel, chromium, and iron, with trace amounts of molybdenum, copper, and titanium. This alloy exhibits excellent resistance to stress-corrosion cracking, crevice corrosion, pitting, and intergranular corrosion. It is also highly resistant to hydrogen embrittlement and chloride stress corrosion cracking. Incoloy alloy 945 has good mechanical properties at both ambient and elevated temperatures. Its high strength and ductility make it ideal for use in high-stress applications, such as gas turbines, chemical processing equipment, and marine applications. This alloy can withstand temperatures up to 1000�°C (1832�°F) and has a high fatigue strength, making it suitable for use in cyclically loaded components. In addition to its excellent mechanical and corrosion resistance properties, Incoloy alloy 945 is also resistant to oxidation and sulfidation. This makes it well-suited for use in high-temperature environments where exposure to gases and corrosive elements is common. Overall, Incoloy alloy 945 is a versatile and reliable alloy that is suitable for a wide range of demanding applications in industries such as aerospace, chemical processing, and power generation. The execution standards for Incoloy alloy 945 by country are as follows: United States: ASTM B163, ASTM B423, ASTM B829, UNS N09945 Europe: EN 10216-5, EN 10297-2, EN 10222-5, EN 10250-4, EN 10269, EN 10272, EN 10296-2, EN 10297-4, EN 10302, EN 10312 Germany: DIN 17742, DIN 17750, DIN 17751, DIN 17752, DIN 17754, W.Nr. 2.4633 United Kingdom: BS 3076 We can provide the following the form:Incoloy alloy945 coil; Incoloy alloy945 strip;Incoloy alloy945 plate; Incoloy alloy945 sheets; Incoloy alloy945 tube; Incoloy alloy945 pipe;Incoloy alloy945 flat; Incoloy alloy945 bar GBG:H945/JIS/UNS:N09945/W.Nr:2.4669 Incoloy Alloy 945 is typically used in high-temperature applications where resistance to oxidation and creep are required. Some of the typical applications include gas turbine components, heat exchangers, furnace muffles, and petrochemical processing equipment. Conclusion Incoloy Alloy 945 is a high-temperature alloy with excellent resistance to oxidation and creep. Its chemical composition and mechanical properties make it suitable for use in high-stress environments at elevated temperatures. Its wide range of applications makes it an important material in the aerospace, petrochemical, and power generation industries.
Hastelloy N is a nickel-chromium-molybdenum alloy with a small amount of tungsten, which offers excellent corrosion resistance in a variety of harsh chemical environments. The alloy is known for its resistance to both oxidizing and reducing conditions, as well as its ability to withstand stress corrosion cracking and pitting. Hastelloy N is primarily used in applications that involve high temperatures and corrosive environments, such as chemical processing, petrochemical refining, and nuclear fuel processing. The chemical composition of Hastelloy N typically includes 56-60% nickel, 20-23% chromium, 8-10% molybdenum, and 0.5-1.5% niobium/tantalum. The small amount of tungsten added to the alloy enhances its resistance to localized corrosion, particularly in environments containing sulfuric acid. Hastelloy N is available in a variety of forms, including plates, sheets, bars, wires, and pipes. The alloy can be welded using a range of techniques, including gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), and shielded metal arc welding (SMAW). Overall, Hastelloy N offers excellent corrosion resistance, high-temperature strength, and good weldability, making it a popular choice for applications in harsh chemical environments. American standards: ASTM B619: Standard specification for Welded Nickel-Chromium-Molybdenum-Cobalt Alloy (UNS N06635) Pipe ASTM B622: Standard specification for Seamless Nickel-Chromium-Molybdenum-Cobalt Alloy (UNS N06635) Pipe and Tube ASTM B626: Standard specification for Welded and Seamless Nickel-Chromium-Molybdenum-Cobalt Alloy (UNS N06635) Pipe Fittings ASTM B366: Standard specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings ASTM B574: Standard specification for Low-Carbon Nickel-Chromium-Molybdenum-Cobalt Alloy (UNS N06686, UNS N06688, UNS N06689, and UNS N08028) Bar and Wire ASTM B575: Standard specification for Low-Carbon Nickel-Chromium-Molybdenum-Cobalt Alloy (UNS N06686, UNS N06200, UNS N06030, UNS N08031, UNS N06035, UNS N08034, UNS N06022, UNS N06230, UNS N06625, UNS N08800, UNS N08811, and UNS N08890) Sheet and Strip European standards: EN 10095: Heat Resisting Steels and Nickel Alloys - Plate/sheet, strip, bars, forgings and seamless tubes - Part 1: List of materials EN 10216-5: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes Japanese standards: JIS NW 0275: Nickel-Chromium-Molybdenum-Cobalt Alloy Plates, Sheets, Strips, Bars and Seamless Pipes (Hastelloy N) JIS NW 625: Seamless pipes and tubes made of corrosion resistant steel (Hastelloy) We can provide the following the products:Hastelloy N coil; Hastelloy N strip;Hastelloy N plate; Hastelloy N sheets; Hastelloy N tube; Hastelloy N pipe;Hastelloy N flat; Hastelloy N bar GB/JIS:NW2201/UNS:N10003/W.Nr:2.4634
Hastelloy B is a nickel-molybdenum alloy that provides excellent resistance to reducing and oxidizing environments, as well as to stress corrosion cracking and pitting. It has a high nickel content, which makes it highly resistant to corrosion by a wide range of chemicals, including hydrochloric, sulfuric, and hydrofluoric acids. Additionally, its molybdenum content provides resistance to reducing agents such as hydrogen sulfide and ammonia. Hastelloy B has a wide range of applications in various industries, including chemical processing, oil and gas, and petrochemical. It is commonly used in equipment such as pumps, valves, heat exchangers, and reactors, as well as in pipelines and fittings. The alloy can be easily fabricated and welded using standard techniques, and can be formed into a variety of shapes and sizes. It also exhibits good thermal stability, allowing it to maintain its mechanical properties even at high temperatures. However, Hastelloy B is not recommended for use in oxidizing environments where the presence of oxidizing salts, such as ferric or cupric salts, can cause rapid corrosion. It also has poor resistance to chloride-induced stress corrosion cracking, and should be used with caution in chloride-containing environments. Overall, Hastelloy B is a versatile and reliable alloy that offers excellent corrosion resistance in a wide range of environments, making it a popular choice for many industrial applications. Hastelloy B is a high-temperature and corrosion-resistant alloy, and its execution standards may vary depending on different countries and regions. Here are some of the main Hastelloy B standards: US Standards: ASTM B335: Standard specification for Hastelloy B hot-rolled seamless pipes, rods and wires; ASTM B333: Standard specification for Hastelloy B hot-rolled plates, sheets, and strips; ASTM B366: Standard specification for Hastelloy B welded and seamless fittings. European Standards: DIN 17751: Standard specification for high-temperature and corrosion-resistant Hastelloy B plates, strips, sheets, and rods; EN 10088-3: Stainless steels and corrosion-resistant steels Part 3 - Technical delivery conditions for stainless steel plates, sheets, and strips. Japanese Standards: JIS G4902: Standard specification for high-temperature and corrosion-resistant Hastelloy B plates, rods, wires, seamless pipes, and welded pipes. Chinese Standards: GB/T 15007: Standard specification for high-temperature and corrosion-resistant Hastelloy B hot-rolled plates, sheets, and strips; GB/T 15008: Standard specification for Hastelloy B hot-rolled seamless pipes and welded pipes; GB/T 15009: Standard specification for Hastelloy B rods and wires; GB/T 15010: Standard specification for Hastelloy B welded and seamless fittings. We can provide the following products:HastelloyB coil; Hastelloy B strip;Hastelloy B plate; HastelloyB sheets; Hastelloy B tube; Hastelloy B pipe;Hastelloy B flat; Hastelloy B bar
Hastelloy S is a nickel-chromium-molybdenum-tungsten alloy with excellent corrosion resistance in a wide range of aggressive media. It was developed by Haynes International, Inc. and is specifically designed for use in highly oxidizing environments. Hastelloy S offers superior resistance to oxidizing and reducing environments, including hot sulfuric acid, sulfurous acid compounds, and hydrogen chloride gas. It also exhibits excellent resistance to localized corrosion, such as pitting and crevice corrosion, and has good resistance to stress corrosion cracking. Due to its exceptional corrosion resistance, Hastelloy S is widely used in the chemical processing industry, especially for applications involving highly corrosive acids, such as sulfuric acid and phosphoric acid. It is also used in pollution control equipment and in the production of pulp and paper. Hastelloy S can be fabricated using a variety of methods, including welding, forging, and machining. However, it is important to use appropriate techniques and equipment to avoid damaging the material's corrosion resistance properties. Overall, Hastelloy S is a highly reliable and durable alloy that offers exceptional performance in highly corrosive environments. American Standards: ASTM B619: Standard specification for welded hastelloy S tubes ASTM B622: Standard specification for seamless hastelloy S tubes ASTM B626: Standard specification for hastelloy S welded and seamless pipe fittings ASTM B366: Standard specification for hastelloy S welded and seamless fittings ASTM B574: Standard specification for hastelloy S rods and bars ASTM B575: Standard specification for hastelloy S plates, sheets, and strips European Standards: EN 10095: Standard specification for hot rolled, forged, and cold worked hastelloy S plates, sheets, strips, rods, and wires EN 10216-5: Standard specification for seamless steel tubes for pressure purposes - technical delivery conditions - part 5: stainless steel tubes Japanese Standards: JIS NW 0276: Standard specification for hastelloy S plates, sheets, strips, rods, and seamless pipes JIS NW 625: Standard specification for hastelloy S welded pipes Chinese Standards: GB/T 14994: Standard specification for nickel-based hastelloy S welded seamless steel tubes GB/T 15007: Standard specification for nickel-based hastelloy S plates, sheets, and strips GB/T 15013: Standard specification for nickel-based hastelloy S welded and seamless pipe fittings GB/T 14995: Standard specification for nickel-based hastelloy S welded steel pipes GB/T 15014: Standard specification for nickel-based hastelloy S rods and bars. We can provide the following the products:Hastelloy S coil; Hastelloy S strip;Hastelloy S plate; Hastelloy S sheets; Hastelloy S tube; Hastelloy S pipe;Hastelloy S flat; Hastelloy S bar GB/JIS:NW0276/UNS:N06635/W.Nr:2.4687
Haynes 625 is a nickel-chromium-molybdenum alloy with niobium/tantalum added to enhance its corrosion resistance and strength at elevated temperatures. It is one of the most widely used superalloys due to its exceptional mechanical properties, high corrosion resistance, and ease of fabrication. Haynes 625 has excellent resistance to pitting, crevice corrosion, and stress corrosion cracking in chloride-containing environments, making it suitable for use in marine and chemical processing applications. It also exhibits high resistance to oxidation and scaling at elevated temperatures up to 1000â??, making it suitable for use in high-temperature applications such as gas turbines, furnace components, and heat exchangers. Haynes 625 can be easily fabricated by various methods including welding, forging, and machining. It can be used in both as-welded and annealed conditions. It is available in various forms such as plates, sheets, bars, and tubes, and is widely used in industries such as aerospace, chemical processing, oil and gas, and nuclear power. US standards: AMS 5599: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; AMS 5666: Specifies the standard specifications for Haynes 625 bars, wire, profiles, and forgings; AMS 5837: Specifies the standard specifications for Haynes 625 seamless or welded tubes; ASME SB 443: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; ASME SB 446: Specifies the standard specifications for Haynes 625 bars and forgings; ASME SB 444: Specifies the standard specifications for Haynes 625 seamless and welded tubes. European standards: EN 2.4856: Specifies the standard specifications for Haynes 625 plate, sheet, strip, bars, and wire; EN 10216-5: Specifies the standard specifications for Haynes 625 seamless steel tubes. Japanese standards: JIS NW 625: Specifies the standard specifications for Haynes 625 plate, sheet, strip, bars, and seamless tubes; JIS NW 6692: Specifies the standard specifications for Haynes 625 welded tubes. Chinese standards: GB/T 14992: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; GB/T 14994: Specifies the standard specifications for Haynes 625 welded seamless steel tubes; GB/T 15008: Specifies the standard specifications for Haynes 625 bars and forgings; GB/T 15010: Specifies the standard specifications for Haynes 625 seamless and welded tubes. We can provide the following the products:Haynes 625 alloy coil; Haynes 625 alloy strip;Haynes 625 alloy plate; Haynes 625 alloy sheets; Haynes 625 alloy tube; Haynes 625 alloy pipe;Haynes 625 alloy flat; Haynes 625 alloy bar GB/JIS:G4903/UNS:N06625/W.Nr:2.4856
Haynes 617 is a nickel-chromium-cobalt-molybdenum alloy with excellent high-temperature strength, good oxidation resistance, and excellent resistance to carburization and sulfidation. It is commonly used in gas turbine engine components, industrial furnace applications, and other high-temperature applications. Haynes 617 has a nominal composition of 44.5% nickel, 20-24% chromium, 8-10% molybdenum, 0.5% maximum copper, 0.15% maximum carbon, 1.0% maximum cobalt, 0.5% maximum silicon, 1.0% maximum manganese, 0.015% maximum sulfur, 0.015% maximum phosphorus, and the balance iron. Haynes 617 offers excellent mechanical properties at high temperatures, making it ideal for use in gas turbine engine components such as combustion liners, transition ducts, and exhaust systems. Its high-temperature strength and resistance to carburization and sulfidation make it suitable for use in industrial furnace applications such as radiant tubes, muffles, and retorts. In addition to its high-temperature strength and resistance to oxidation and carburization, Haynes 617 also offers good resistance to thermal shock and thermal fatigue. This makes it ideal for use in applications that require resistance to cyclic heating and cooling, such as gas turbine engine components and industrial furnace applications. Overall, Haynes 617 is a versatile high-temperature alloy that offers excellent mechanical properties and resistance to corrosion and oxidation in high-temperature environments. Its use in gas turbine engine components and industrial furnace applications has been well-established, and it continues to be an important material in these industries. US standards: AMS 5887: Standard specification for Haynes 617 plate, sheet, and strip; AMS 5888: Standard specification for Haynes 617 rod, wire, and bar; AMS 5889: Standard specification for Haynes 617 seamless or welded pipe; ASME SB 166: Standard specification for Haynes 617 rod, wire, and bar; ASME SB 167: Standard specification for Haynes 617 seamless pipe; ASME SB 168: Standard specification for Haynes 617 plate, sheet, and strip; ASME SB 564: Standard specification for Haynes 617 forgings. We can provide the following the products:Haynes 617 alloy coil; Haynes 617 alloy strip;Haynes 617 alloy plate; Haynes 617 alloy sheets; Haynes 617 alloy tube; Haynes 617 alloy pipe;Haynes 617 alloy flat; Haynes 617 alloy bar GB/JIS:NW 6617/UNS:N06617/W.Nr:2.4663
2507 stainless steel, also known as duplex stainless steel, is a type of stainless steel that contains high levels of both chromium and molybdenum, as well as lower levels of nickel. This combination of metals provides increased resistance to corrosion and high strength. The chemical composition of 2507 stainless steel typically includes 25% chromium, 7% nickel, 4% molybdenum, and small amounts of other elements such as nitrogen and carbon. The high levels of chromium and molybdenum make it highly resistant to pitting, crevice corrosion, and general corrosion in a wide range of environments, including seawater, acidic and alkaline solutions, and chloride-containing solutions. In addition to its excellent corrosion resistance, 2507 stainless steel also offers high strength and toughness, making it ideal for use in a range of applications that require high performance under demanding conditions. These applications include chemical and petrochemical processing equipment, oil and gas production equipment, and offshore platforms. Overall, 2507 stainless steel is a highly versatile and reliable material that offers exceptional resistance to corrosion, high strength, and toughness, making it an excellent choice for a wide range of industrial and commercial applications. The execution standards for 2507 stainless steel mainly include the following aspects: Chemical composition: Standards such as ASTM A240, EN 10088-2, JIS G4305, GB/T 3280 define the chemical composition of 2507 stainless steel. Mechanical properties: Standards such as ASTM A240, EN 10088-2, JIS G4305, GB/T 3280 define the mechanical properties of 2507 stainless steel, including tensile strength, yield strength, elongation, etc. Corrosion resistance: Standards such as NORSOK MDS D55, ASTM A923, ASTM G48, EN ISO 10204 define the performance and testing methods of 2507 stainless steel in various corrosive environments. Manufacturing process: Standards such as ASTM A928, EN 10217-7 define the manufacturing process and welding requirements of 2507 stainless steel. The following are some of the execution standards for 2507 stainless steel established by major countries or regions: United States: Standards such as ASTM A240, ASTM A789, ASTM A790, ASTM A928. Europe: Standards such as EN 10088-2, EN 10217-7, EN 10216-5. Japan: Standards such as JIS G4305, JIS G4304, JIS G4307. China: Standards such as GB/T 21833, GB/T 3280, GB/T 14976. Overall, while the execution standards may vary slightly among different countries or regions, they all aim to ensure the quality and performance of 2507 stainless steel. We can provide the following the form:2507 stainless steel coil; 2507 stainless stee strip;2507 stainless stee plate; 2507 stainless steel sheets; 2507 stainless steel tubes; 2507 stainless steel pipe;2507 stainless steel flat; 2507 stainless steel bar
Hastelloy C-2000 is a high-performance nickel-molybdenum-chromium alloy with copper and tungsten additions, known for its exceptional resistance to a wide range of corrosive media, including sulfuric acid, hydrochloric acid, nitric acid, and their mixtures. Hastelloy C-2000 was developed by Haynes International as an improved version of the original Hastelloy C alloy, with enhanced corrosion resistance and improved mechanical properties. Its chemical composition includes approximately 59% nickel, 16% molybdenum, 16% chromium, 1.6% copper, 0.6% tungsten, and smaller amounts of iron, manganese, silicon, carbon, and aluminum. Hastelloy C-2000 has excellent resistance to localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking, as well as to intergranular attack and corrosion from wet chlorine gas. It also has good resistance to oxidizing and reducing environments, making it suitable for use in a wide range of industrial applications, including chemical processing, pollution control, and pulp and paper production. In terms of mechanical properties, Hastelloy C-2000 has a minimum tensile strength of 620 MPa and a minimum yield strength of 270 MPa, along with a minimum elongation of 45%. It has a hardness range of HB 215-335. Overall, Hastelloy C-2000 is a highly versatile alloy that offers excellent resistance to a wide range of corrosive media, combined with good mechanical properties and ease of fabrication. It is a popular choice for applications where corrosion resistance is critical, such as chemical processing, pollution control, and pulp and paper production. Here are the national standards for Hastelloy C-2000 alloy: United States: AMS 4675, AMS 7233, ASTM B366, ASTM B574, ASTM B575, ASTM B619, ASTM B622, ASTM B626, UNS N06200 Europe: EN 2.4675 Germany: DIN 17744 France: AFNOR NU-30M United Kingdom: BS HR 505 Japan: JIS NW 6200 We can offer the following products:Hastelloy C-276 coil; Hastelloy C-276 strip;Hastelloy C-2000 plate; Hastelloy C-2000 sheets; Hastelloy C-2000 tube; Hastelloy C-2000 pipe;Hastelloy C-2000 flat; Hastelloy C-2000 bar GB:GH3600/JIS:NW 6200/UNS:N06200/W.Nr:2.4675 Hastelloy C-2000 is a high-performance nickel-molybdenum-chromium alloy with copper and tungsten additions, known for its exceptional resistance to a wide range of corrosive media, including sulfuric acid, hydrochloric acid, nitric acid, and their mixtures. Hastelloy C-2000 was developed by Haynes International as an improved version of the original Hastelloy C alloy, with enhanced corrosion resistance and improved mechanical properties. Its chemical composition includes approximately 59% nickel, 16% molybdenum, 16% chromium, 1.6% copper, 0.6% tungsten, and smaller amounts of iron, manganese, silicon, carbon, and aluminum.
