Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
409 stainless steel is a ferritic stainless steel commonly used in machinery, construction and other engineering. Due to the existence of austenite grains, its mechanical properties are greatly improved. And due to the addition of a lot of alloying elements, the strength and hardness are also greatly improved. It has good mechanical properties and high temperature corrosion resistance. It contains 11% chromium, the minimum required to form a passive surface film that makes stainless steel corrosion resistant. It combines good high temperature corrosion resistance with moderate strength, good formability and overall cost. We can provide the following form:409 stainless steel coil; 409 stainless stee strip;409 stainless stee plate; 409 stainless steel sheets; 409 stainless steel tubes; 409 stainless steel pipe; 409 stainless steel flat; 409 stainless steel bar 409 is most commonly used in truck exhaust systems, agricultural equipment, and heat and gas turbine exhaust silencers.
317L stainless steel is an austenitic stainless steel that contains a low carbon content and higher amounts of molybdenum and nickel compared to 304 stainless steel. The low carbon content of 317L reduces the risk of intergranular corrosion caused by sensitization during welding or high-temperature exposure. The higher nickel and molybdenum content of 317L provide superior resistance to corrosion in harsh environments, particularly those containing chlorides or other halides. This makes it suitable for use in chemical processing, pulp and paper manufacturing, and oil and gas refining applications. 317L stainless steel offers excellent toughness, strength, and formability, and is easy to fabricate using standard methods. It can be welded using common welding techniques, and is often used to fabricate complex shapes and components. Some of the key properties of 317L stainless steel include: Corrosion resistance: 317L offers superior corrosion resistance in harsh environments, particularly those containing chlorides or other halides. High-temperature resistance: 317L can withstand high temperatures and thermal cycling without losing its corrosion resistance properties. Strength and toughness: 317L offers good strength and toughness, making it suitable for use in demanding applications. Fabricability: 317L is easy to fabricate using standard methods, and can be welded using common welding techniques. Overall, 317L stainless steel is a versatile and reliable material that is well-suited for use in a wide range of applications where superior corrosion resistance and high-temperature performance are required. American Standard: ASTM A240/A240M-20a European Standard: EN 10088-2:2005 Japanese Standard: JIS G4304-2005 Chinese Standard: GB/T 3280-2015 Here are some of the most common international standards for 317L stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes ASTM A403/A403M: Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes JIS G4304: Hot-rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following form:317L stainless steel coil; 317L stainless stee strip;317L stainless stee plate; 317L stainless steel sheets; 317L stainless steel tubes; 317L stainless steel pipe; 317L stainless steel flat; 317L stainless steel bar
Stainless steel coils, stainless steel sheet, stainless steel tube, stainless steel bars, other customised products.
Cold rolled steel coil, hot rolled flat steel, billet,Railroad track steel rail, carbon steel, stainless steel, special steel, rigid bar and wire rod, galvanized steel, angle steel, construction steel, Steel plate, roof, iron fence, aluminum alloy, H-beam, channel steel, square steel, steel pipe, steel wire, I-beam, angle steel, rebar, billet, wire rod and other steel materials, Copper, tin, aluminum, magnesium, tungsten steelï¼?building glass, tempered glass, doors and windows, plywood, ceramic tile, Air conditioner, elevator, escalator, Pipes, asphalt, Cement clinker, Solar electromagnetic panel, Smart home, the price is cheap.
Hot Rolled Steel U channel size: 50*38*4.5-400*104*14.5mm length: 6-12m grade: Q195/235/SS400 packing: export seaworthy payment terms: by TT or LC
H Beam size: 100*100-900*300mm length: 6/12m grade: Q235/SS400/Q345/355 packing: export seaworthy payment terms: by TT or LC
Hot Rolled Unequal Angle Bar size: 25*16*3-200*125*18mm length: 6-12m grade: Q195/235/SS400 packing: export seaworthy payment terms: by TT or LC
Hot Rolled Equal Angle Bar size: 20*20*3-200*200*24 length: 6-12m grade: Q235/SS400 packing: export seaworthy payment terms: by TT or LC
Forged hollow bars Our annual forging capacity is 10,000 tons and we have more than ten scientific and technical personnel. Our extensive raw material inventory includes structural carbon steel, alloy structural steel, carbon tool steel, alloy tool steel, stainless steel and non-magnetic steel etc. We produce large and medium sized forgings including 4145H mod drilling stabilizer forging, reamer forging, and wellhead components forgings, etc. Tiptop supplies a wide range of forged hollow bars, which has good resistance and high strength and hardness. Forged hollow bar is usually made from a solid round metal billet which is related and pushed or pulled over a form until the material is shaped into a hollow tube. Steel ingot making Manufacturing process EAF + LF + VD+ Forging+ Normalizing & Tempering + Rough machining + UT test + Quenching & Tempering + Precision machining Report Chemical composition report, Physical properties report, Heat treatment report, Dimensional inspection report, NDT report Nondestructive test (NDT) UT ( ultrasonic testing ), MT ( magnetic particle testing ), PT (penetrant testing)
Steel shot :S780/S660/S550/S460/S390/S330/S280/S230/S170/S110 Steel grit:G10/G12/G14/G16/G18/G25/G40/G50G80G120
CommodityAngle steel, steel angle Carbon material Q195, q215, q235/ss400, q345, a36, s235jr, s275jr, St35.8, st37, st52, etc Stainless material304, 304l, 309s, 310s, 316l, 316ti, 317l, 321, 347h, 201, 202, 409, 409l, 410, 420, 430, etc StandardAisi, astm, bs, din, sus, en, gb, jis, etc SurfaceOil, black, galvanized, painted, epoxy coating Equal angle 1)type: 2#-20# 2)size: 20mm-200mm 3)thickness: 3.0mm-24mm Unequal angle1)type: 2.5/1.6-20/12.5 2)long side: 50-200mm 3)short side: 32-125mm 4)thickness: 4.0-18mm Length12m, 9m, 6m, 5.8m, 3m or as your requirement PackageExport standard package as wooden box, bundled, waterproof package or as your requirement UsageWidely used in various building structure and engineering structure TechniqueHot rolled Trade termsFob, cfr, cif Payment term 30%t/t, balance paid within 7 days after shipment. 100% l/c at sight Delivery time10-25days after receiving the deposit
Carbon steel round bar 1.Grade:1018 2. Surface: black surface/turned/ground 3. Process: eaf+lf+vd+ forged+ heat treatment (annealed, normalized, q+t) 4. Chemical composition (%): C si mn pâ?¤ sâ?¤ 0.15/0.23 0.10/0.35 0.60/0.90 0.025 0.025 5.Specification: Round Diameter length 10mm~600mm 2000mm~6000mm Steel plate Thickness width length 20~400mm 80~1000mm 2000mm~5800mm 6. Inspection: 100% ultrasonic according to the test standards:sep1921-84, gr.3 class c/c 7. Packing situation: standard seaworthy packing or as customer required 8. Delivery time: 20 days after order confirmed 9. Payment: t/t or l/c at sight. Application: Extrusion dies and die-casting for alumium, mandgnesium allay mostly, for copper alloy could usemechaincal press forhing of steel, could use also various large-sized mirror plastic mould, precision plastic mould, like: cars accessies, home appliances, electronic equipment plastic mould Cutting service provided Workshop is equipped with the most advanced cnc grinding machine, cnc milling machine, vertical and horizontal band saw cutting machine, max. 30mt loading cranes, ultrasonic test machines... These equipments are manipulated with professional engineers with many years work experiences
Element Content (%) Iron, Fe 97.395-98.07 Manganese, Mn 0.700-0.900 Chromium, Cr 0.700-0.900 Carbon, C 0.380-0.430 Silicon, Si 0.150-0.300 Sulfur, S 0.0400 Phosphorous, P 0.0350 Physical Properties Properties Metric Imperial Density 7.85 g/cm3 0.284 lb/in Mechanical Properties Properties Metric Imperial Tensile strength 570 MPa 82700 psi Yield strength 295 MPa 42800 psi Elastic modulus 190-210 GPa 27557-30458 ksi Bulk modulus (typical for steel) 140GPa 20300 ksi Shear modulus (typical for steel) 80 GPa 11600 ksi Poissonâ??s ratio 0.27-0.30 0.27-0.30 Izod Impact 41.0 J 30.2 ft.lb Hardness, Brinell 167 167 Hardness, Knoop (converted from Brinell hardness) 188 188 Hardness, Rockwell B (converted from Brinell hardness) 85 85 Hardness, Vickers (converted from Brinell hardness) 175 175
We supply a comprehensive range of standard N grade, 500 MPa deformed reinforcing bar (D500N). Stock lengths are available off-the-shelf, but rebar is often supplied processed (cut, bent, threaded) or fabricated to suit the specific requirements of your project.
Thermal lance also known as burning bar or thermic lance, made by hollow mild steel pipes filled with a number of iron wires, which is a powerful efficient cutting tool by high purity oxygen flow through the interior of the lance to create extraordinarily high temperature from 3,600 to 4,426�°C for cutting through just about anything. Thermal lance can be used whenever some ferrous and non-ferrous materials must be removed or cut into pieces, like sand casting riser cutting or ladle furnace tapping. When molten material is spilled, it can be allowed to solidify and then cleaned up with thermal lance. For coastal buildings, interior concrete sometimes breaks down to produce what is called concrete cancer, but thermal lance can be used to remove this degrading concrete so that replacement material can be packed in. These characteristics of the thermal lance make it a particularly efficient and cost-effective method of cutting steel and cast-iron materials too thick to be cut with a normal oxy-acetylene torch. In the case of thicker materials, during the operation, the lance tube will be consumed by the intense heat at the cut point and should be discarded once it becomes too short to be safely used.
Prestressed threaded bar (or PT bars) are high-strength, high-precision, straight-line steel bars with external threads on the entire steel bar. The steel bar can be screwed onto the connector with internal threads at any section or screwed with a threaded nut with internal threads for anchoring. The utility model has the advantages of simple connection and anchorage, strong adhesion, safe and reliable tension and anchorage and the like, and is a novel material for developing prestressed concrete component. Prestressed Bar are currently used to anchor and support the dam body form of the dam foundation. In the cable-stayed bridge, fully threaded bars are used as the main ribs and bridge foundations of the main tower. The use of fully threaded steel bars saves steel, reduces component area and reduces component weight. The continuous external thread is hot rolled. The shape of thread bar is shown as following figure. The main dimension ranges from 15mm-50mm and the grade ranges from 500/630Mpa to 1200/1330Mpa.
Fully Threaded Bars are high-strength, high-precision, straight-line steel bars with external threads on the entire steel bar. The steel bar can be screwed onto the connector with internal threads at any section or screwed with a threaded nut with internal threads for anchoring. The utility model has the advantages of simple connection and anchorage, strong adhesion, safe and reliable tension and anchorage and the like, and is a novel material for developing prestressed concrete component. Fully threaded steel bars are currently used to anchor and support the dam body form of the dam foundation. In the cable-stayed bridge, fully threaded bars are used as the main ribs and bridge foundations of the main tower. The use of fully threaded steel bars saves steel, reduces component area and reduces component weight. The continuous external thread is hot rolled. The shape of thread bar is shown as following figure. The main dimension ranges from 15mm-50mm and the grade ranges from 500/630Mpa to 1200/1330Mpa.
Prestressed threaded bar (or FT bars) are high-strength, high-precision, straight-line steel bars with external threads on the entire steel bar. The steel bar can be screwed onto the connector with internal threads at any section or screwed with a threaded nut with internal threads for anchoring. The utility model has the advantages of simple connection and anchorage, strong adhesion, safe and reliable tension and anchorage and the like, and is a novel material for developing prestressed concrete component. Fully threaded steel bars are currently used to anchor and support the dam body form of the dam foundation. In the cable-stayed bridge, fully threaded bars are used as the main ribs and bridge foundations of the main tower. The use of fully threaded steel bars saves steel, reduces component area and reduces component weight. The continuous external thread is hot rolled. The shape of thread bar is shown as following figure. The main dimension ranges from 15mm-50mm and the grade ranges from 500/630Mpa to 1200/1330Mpa.
Product Introduction Prestressed threaded bar (or PT bars) are high-strength, high-precision, straight-line steel bars with external threads on the entire steel bar. The steel bar can be screwed onto the connector with internal threads at any section or screwed with a threaded nut with internal threads for anchoring. The utility model has the advantages of simple connection and anchorage, strong adhesion, safe and reliable tension and anchorage and the like, and is a novel material for developing prestressed concrete component. PT Bars are currently used to anchor and support the dam body form of the dam foundation. In the cable-stayed bridge, fully threaded bars are used as the main ribs and bridge foundations of the main tower. The use of fully threaded steel bars saves steel, reduces component area and reduces component weight. The continuous external thread is hot rolled. The shape of thread bar is shown as following figure. The main dimension ranges from 15Â mm-50Â mm and the grade ranges from 500/630Mpa to 1200/1330Mpa.