Sunstar high pressure stand alone model is a new type of solar water heater which adopts advanced heat pipe and all glass vacuum tube technology. Highly efficient vacuum tube absorbs heat from sunlight and heat pipe transfers heat to the condenser end of itself. Condensor indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The available size of the tank ranges from 150l to 250l.
Thermosyphon solar water heater relies on the natural circulation of water between the collector and the tank or heat exchanger. As water in the vacuum tubes is heated it rises naturally into the tank, while cooler water in the tank flows down to the bottom of the vacuum tubes, causing circulation throughout the system. Technical specificationa *Both of inner and outside water tank shell are made of SUS3042B food grade stainless steel plates, welded by argon arc. Water is pure and drinkable. *Heat insulation of water tanks adopts polyurethane foam, thickness is 55mm. *Silicon rings to connect and seal them. *The tubes and supports are adjustable, power bearing is average, and can assure the vacuum tubes to use for long time. *Whole glass vacuum tubes adopt super hard borax and silica glass. *Absorb rate:=93%, thermal radiation rate:=6%(100 íµ) *Resist 25mm hail, using life can last 15 years. *Temperature when exposed to sun without water:250íµ, 2.5hours to boiling if using single tube. *If you use electrical appliances to aid heating, to switch off the power supple before boiling. *To test the water temperature before using, in order to avoid scalding.
Specifications: 1) Tank Inner tank: SUS 304-2B (food grade) Stainless Steel. Outer tank: SUS 201 Stainless Steel. Insulation layer: Polyurethane Foaming. Heat preservation: 72h. Tank capacity: 98L ~ 300L. 2) All Glass Vacuum Tube Diameter:ª¦47, ª¦58 Length: 1500mm, 1800mm. Numbers of tube: 15, 16, 18, 20, 24, 30pcs. Hail resistance: 25mm 3) Bracket Material: SUS 201 Stainless Steel. 4) Accessories: Electric Heater, Controller, Assistant Tank, Magnesium Stick and so on. Pack in cartons
Patio halogen heater Ce and rohs approval
Heating element The products of this company are mainly applicable to chemical equipment, plastic forming and auxiliary equipment, sauna equipment, electric heating boilers, kitchen equipment, industrial cleaning equipment, commercial refrigerating equipment, commercial heaters, commercial air-conditioning and drinking equipment, solar energy equipment, electric frying equipment, wave peak welding electronic automated equipment, etc. For products, we always follow the principle of top quality and efficiency to win over clients and perform the most rigorous standards so as to ensure that the products are always in their optimal state. Therefore, the electric heating tubes and heating tube products provided by this company are in their dominating superiority in operation functions, security and service life. 1.Tube material: sus304, sus321, sus316l, sus310s, inco840. 2.Electric heating tube diameter : ¦6.6, ¦8.0, ¦10.0, ¦11.0, ¦12.0, ¦14.0, etc 3.Sealing patterns: heat resistance epoxy, glass. 4.Electrical performance: insulation resistance value is over 10000m+ and leakage current less than 0.5ma after being placed in cooling room for more than 1 year. 5.Input power and power:to be customized as required. Ok
Product Name: Standard Model Separate Solar SystemPlace of Origin: ChinaFeatures: 1) Collector size: 130mm x 130mm 2) Vacuum tube: 1,500mm / »47, 12pcs/sector 24 tubes/set 3) Vacuum tube: 1,800mm / »58, 15pcs/set, 20pcs/set or 30pcs/set 4) Tank: 150L, 200L, 300L 5) Collector housing: 0.8mm stainless steel, frame 1.5mm stainless steel, insulation material, rock wool or olyurethane 6) Porcelain enamel inner tank, super-big magnesium rod, scale-resist, endure 21 bar pressure 7) Works normally if one tube damaged
Coil heater Have get iso9001:2000 , iqnet , cnab , ce , cqc and rohs certificates .
Solar water heater Outside tank: stainless steel Diameter: 420mm Inside tank: stainless steel sus304 2b Solar absorber: glass vacuumtube47-1.5m Polyurethane foam layer: 55mm Frame: stainless steel Different model has different size. We will send these to you if you want in our emails.
The feed water tank can automatically supply the water when you using the system. The cold water can be warm up when it flowing into the copper pipe. This patent broke the tradition of hot water using in the water tank. The volume of hot water is not limit for tank volume, and it founded the new times of hot water. Carton
Solar water heaters All glass vacuum tubes, much less influenced by the wind, weather and temperature changes. Some kinds with CPC mirror reflectors have the widest applications including pool heating, water heating , space heating and process heating.
Solar water heater Specification Models Tubes qty. (pcs) Vacuum tube Mm*mm) Capacity (litre) Quantity Kg/day) Temperature (celsius) Using (times/day) Sy47-1500-16 16 1500x47 98 60-200 45-95 2-6 Sy47-1500-18 18 1500x47 110 80-250 45-95 3-8 Sy47-1500-20 20 1500x47 130 90-280 45-95 3-9 Sy47-1500-24 24 1500x47 155 110-350 45-95 4-11 Sy47-1500-30 30 1500x47 220 140-440 45-95 5-14 Sy58-1800-15 15 1800x58 150 120-300 45-95 4-8 Sy58-1800-18 18 1800x58 180 130-350 45-95 4-9 Sy58-1800-20 20 1800x58 200 160-450 45-95 5-11 Sy58-1800-24 24 1800x58 240 200-500 45-95 6-14 Sy58-1800-30 30 1800x58 300 260-580 45-95 6-18 Sy70-2100-15 15 2000x70 160 150-350 45-95 5-9 Sy70-2100-18 18 2000x70 190 170-400 45-95 5-11 Sy70-2100-20 20 2000x70 210 190-500 45-95 6-14 Sy70-2100-24 24 2000x70 250 230-580 45-95 7-18 Sy70-2100-30 30 2000x70 310 290-650 45-95 7-20 1.Solar collector: vacuum glass tube 2.Inside tank: 2b stainless steel 3.Outside tank: imported steel 4.Insulation: thermos insulator layer 5.Sealing: silicon gel o ring 6.Top tank: steel aluminum 7.Support frame: stainless 8.Angle: 38/45/50 degree
Solar water heater Water tank imported sus304 2b stainless steel External shell imported nacre white armor plate Insulating layer 50mm-60mm polyurethane foamed Tank diameter 420mm=460mm Specification 15 18 20 24 30 pieces Structure outlet holes on sides; electric heater and water inlet and outlet holes and exhaust hole at the lower part Bracket material bracket made of premium cold roll with plastic spray Fastening piece stainless steel screw Seal macromolecule silicone rubber Glisten obliquity 45¦ Heated temperature 45-95¦ Vacuum tubes borosilicate gla-1500mm 58-1800mm
Solar water heater Features 1. Internationally certified product 2. Reliable, efficient, double-layer glass evacuated tube 3. Copper transition heat pipe for rapid heat transfer 4. Easy plug-in installation 5. Maintenance free 6. Suitable for pressurized water heater system (up to 0.8mpa) 7. Corrosion resistant silver brazed copper condenser 8. All stainless steel frame and dark gray aluminium casing 9. Stable solar conversion throughout the day (tubes passively track the sun) 10. Freezing resistance: -35 c 11. Stagnation temperature: >220 c 12. The perfect solar collector for domestic solar water heater system and commercial application 13. Comprehensive 10 years limited warranty
Rated power (pmax) 3.6 watts Operating voltage (vmp) 6volts Operating current (imp) 0.6amps Size Fold Length, (mm) 235 Width, (mm) 115 Thickness, (mm) 15 Unfold Length, (mm) 550 Width, (mm) 235
Consol solar heater
TZBA1500/20-138 0.679 CUBIC METER
Model: UNP-S02 Series Type: No pressure Solar Vacuum Tube: 8/10/12/15/18/20/24/30/36 Tube Size: 58*1800 1.95kgs Tank Capacity: from 80L to 300L Material: Stainless steel Bracket: U type and 1.2mm thickness
Flange immersion heater is made of seamless stainless steel tube, high-quality Mgo, High Ohm NiGr alloy wire. Flange immersion heater is more heat exchange efficient, that means flange immersion heater could standard 3 to 4 times wattage. Flange immersion heater is made of advanced production equipment and through strict quality test. Characteristic fast temperature rise heating uniformity heating exchange efficiently long-time usage appliance.
Non-pressurized solar water heater with vacuum tubes for water heating available with 100-300L tank. Scope of delivery: tank, aluminnum brackets, evacuated tubes Installation types: Pitched roof, flat roof. Advantages and benefits: Cost-effective solar water heater solutions. Low maintenance and repair requirements. Quick and easy installation due to complete pre-assembled components. Customizing: Development of customer-specific modifications and individual solutions by request.
The tubular electrothermal element (electrothermal tube) is made of magnesium oxide sand with good heat resistance, thermal conductivity and insulation by filling and compacting the holes of spiral electrothermal alloy wires (nickel-chromium and ferrochromium alloy) along the central axis of the tube with metal tubes as the shell (including stainless steel and copper tubes). The ends of the tube are sealed with silica gel and processed by other processes.
