Rubber Expansion Joints Expansion joints are specially engineered products inserted in a rigid piping system to achieve one or more of the following: Absorb movement Improved thermal stability Relieve system strain due to thermal change, load stress, pumping surges, wear or settling Reduce mechanical noise Compensate for misalignment Eliminate electrolysis between dissimilar metals They are ideally suited for hundreds of applications in a wide range of industries, including: Power Generation Pulp and Paper Chemical Processing Water/Waste Water Marine Mining Heating, Ventilating, and Air Conditioning Rubber Expansion Joints Union Type Size: 1/2" to 3", DN15 to DN80 Union Material: Malleable Iron Union Dimension: ASME B16.39 Union Thread: BSPT, NPT, DIN Rubber Material: SILICONE, PTFE/TFE/FEP, EPDM, VITON, HYPALON, SBR/GRS/BUNA-S, BUNA-M/NITRIL, CHLOROBUTYL, BUTYL, NATURAL RUBBER, GUM RUBBER, NEOPRENE Working Pressure: PN10/PN16, Class 150/Class 300 Medium: Water, Chemical, Oil&Gas, Alkali Diluted, Acid Diluted etc. Rubber Expansion Joints Flange Type Size: 1 1/4" to 120", DN32 to DN3000 Flange Material: Carbon Steel, Stainless Steel Flange Dimension: ANSI B16.5, BS4504, DIN EN 1092-1 Rubber Material: SILICONE, PTFE/TFE/FEP, EPDM, VITON, HYPALON, SBR/GRS/BUNA-S, BUNA-M/NITRIL, CHLOROBUTYL, BUTYL, NATURAL RUBBER, GUM RUBBER, NEOPRENE Working Pressure: PN10/PN16, Class 150/Class 300 Medium: Water, Chemical, Oil&Gas, Alkali Diluted, Acid Diluted etc. Into Plywood Case
A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal. Size: 1/2" to 60", dn 12mm to dn 1500mm Pressure class: class 150 to 2500, pn 2.5 to pn 250 Facing: rf / rtj Into plywood case
Single sphere rubber expansion joint, twin sphere rubber expansion joint, , heavy duty rubber expansion joint with din, bs, en, jis, ansi flanged drilling and twin sphere union rubber expansion joint t with bsp or npt threaded. Size: dn32-dn3000 Material: epdm, nbr, nr, silicon. Pressure: pn6, pn10, pn16, pn25. Connection: din2576, bs4504 pn16, jis10k, ansi b16.5 flange;bsp, npt thread Cartons and cases
Pipe fittings and pipes. 1.BS or DIN or ANSI 2.1/2"-6".
Product Description 1) Commodity name: seamless austenitic stainless steel boiler, superheater and heat-exchanger tubes 2) Process method: cold drawn/cold rolling 3) Surface finish: annealed/cold rolling 4) Material: TP304, TP304L, TP310/S, TP316L, TP316/316L, TP317L, TP321, 5) Standards: ASTM (ASME) SA/A213/M Application: Petroleum, chemical industry, chemical fiber, smelt, medical machinery, papermaking, heat preservation and refrigeration, Mechanical equipment, food, electricity, water conservancy, architecture, Aerospace, navigation shipbuilding, environmental protection and Boiler heat exchanger 6) Size: a) O.D.: 1/4" to 3" b) W.T.: 10BWG, 12BWG, 14BWG, 16BWG, 18BWG, 20BWG, 22BWG 7) Length: max.13 meters 8) Delivery conditions: annealed and pickled 9) Applications: for fluid and gas transport; structure and machining 10) Packing: Seaworthy wooden cases
Carbon steel seamless pipe Hot rolled seamless steel pipeline Welded steel pipe tubing Erw carbon seamless pipe Spray painting, oiling, anticorrosion & insulation , bevel or plain end, protect of pipe end and packaging.
Seamless implementation of the standard material: api 5l/5ct gr.B astm a106/a53 gr.B st35.8 st42 st45 st52 st52.4 20 # 45 # q345b x42-x65. Specifications: 1 / 2 "-36" * sch10-xxs. Our factory has api 5l/5ct iso9001 seamless lloyd's certification, in straight seam, spiral pipe plant for sale at all have api qualification Certication:iso 9001:2000 api 5l Standard:astm, api, din, en, bs, ect. Specification: od(outside diameter):12.7mm-711mm Wt(wall thickness):2.5mm-50mm Material:low carbon steel(moq 100ton), medium carbon steel, high carbon steel Qulity goods in stock :astm a106 gr.B, astm a53 gr.B, api 5l gr.B
Stainless steel pipe fittings . As clients'requirments.
01) Commodity name: seamless austenitic stainless steel tubing for general purposes 02) Process method: cold drawn, cold rolling 03) Surface finish: annealed/manual polished/mechanical polished 04) Material: TP304, TP304L, TP310/S, TP316L, TP316/TP316L dual grade, TP317L, TP321, TP347 05) Standards: ASTM A269/M 06) Size: a) O.D.: 6mm to 80mm b) W.T.: 0.89mm, 1mm, 1.5mm, 2mm, 2.5mm and 3mm 07) Delivery conditions: annealed & pickled 08) Applications: for instrumentation service 09) Packing: plastic bag for each piece then packed in seaworthy wooden cases 10) Min order quantity: 10 metric tons or upon negotiation 11) Delivery date: According to order
Cold draw stainless steel pipe
All of the products are made of cnc laths. 1/8"---4"
Butt weld pipe fittings Type: 45, 90, 180 deg. Long/short radius elbows, equal tees, reducing tees, equal crosses, reducing crosses, concentric reducers, eccentric reducers, caps, barred tees, etc. Pipe bend: Size: 3?-48? Radius: 3d, 4d, 5d, 6d, 8d, 10d Angels: 22.5deg, 30deg, 45deg, 60deg, 90deg Pipe fitting standard: Ansi b16.9, ansi b16.28, din 2605, din2615, din2616, jis b2312, jis b2313 Pipe fitting material: Carbon steel Astm a 234 wpb, a420 wpl1, wpl3, wpl6, Astm a860 wphy 42, wphy52, wphy60, wphy65, wphy70 Stainless steel Astm a403 wp304/304l, wp316/316l, wp321, wp347 Alloy steel Astm a234 wp1, wp5, wp9, wp11, wp12, wp22, wp91 Duplex & super duplex steel: Astm a815 uns s31803, uns s32750, uns s32760 Schedule: Carbon steel & alloy steel Std, xs, xxs, sch10-sch160 Stainless steel Sch5s, 10s, 40s, 80s Pipe fitting size: Carbon steel: 1/2?-96? Stainless steel: 1/2? ? 24? (seamless and erw), 26? ? 72? (welded) Sw & screwed npt pipe fittings Type: Elbow, tee, cross, union, half coupling, full coupling, reducing coupling, cap, boss, hex. Head busing, hex. Nipple, swage nipple, plug, weldolet, socketolet, threadolet, elbowolet, etc. Pipe fitting materials: Carbon steel: astm a105, a350 lf2, a694 f42, a694 f60, f694 f65 Stainless steel: astm a182-f304, f304l f316 f316l f321 Alloy steel: astm a182-f11, a182 f22 Pipe fitting standard: Ansi/asme b16.11, mss sp-79, sp-83, sp-95-, sp-97, bs3799, jis b2316 Pipe fitting rating: Threaded fittings: 2000lbs, 3000lbs, 6000lbs. Socket-weld fittings: 3000lbs, 6000lbs, 9000lbs. Pipe fitting size: 1/8 - 4.
1.Commodity Name CARBON STEEL SEAMLESS PIPE 2.Standard ASTM A106 ,ASTM A53 , ASTM A179 ,ASTM A192,GB 3087, GB/T 8162 ,GB/T8163 10# 20#, , 3.Outer Diameter 2-36 mm 4.Wall Thickness 21.3-810 mm 5.Length 5.8m,6m,11.8m or as per customer's requirements
Contact:karen@cpipefittings.com Web:http://cpipefittings.com Pipe:carbon steel pipe, alloy steel pipe,stainless pipe, seamless steel pipe, weld steel pipe, electric-resistance weld steel pipe(ERW), electric-fusion(arc)-welded(EFW), spiral welded steel pipe, submerged arc welded(SAW)... Our main products have pipe fittings(elbow,flange,bend,tee,reducer,olet,bolt, gasket,nipple,coupling,plug,cap,cross...) and steel pipe. Elbow have LR Elbow and SR Elbow,and are divided into 45 degree,90 degree and 180 degree. Tee have equal tee and reducing tee. Reducer have CON reducer and ECC reducer. Olet have threadolet, weldolet,sockolet,elbolet,sweepolet,nipolet,boss,flanged olet... And the flange and pipe have a lot of kinds, in all our products are of good quality and complete.Our products main material is carbon steel, alloy steel and stainless steel.
Contact:karen@cpipefittings.com Web: http://www.cpipefittings.com Our main products have pipe fittings(elbow,flange,bend,tee,reducer,olet,bolt, gasket,nipple,coupling,plug,cap,cross...) and steel pipe. Elbow have LR Elbow and SR Elbow,and are divided into 45 degree,90 degree and 180 degree. Tee have equal tee and reducing tee. Reducer have CON reducer and ECC reducer. Olet have threadolet, weldolet,sockolet,elbolet,sweepolet,nipolet,boss,flanged olet... And the flange and pipe have a lot of kinds, in all our products are of good quality and complete.Our products main material is carbon steel, alloy steel and stainless steel .
Contact:karen@cpipefittings.com Web:http://www.cpipefittings.com Our main products have pipe fittings(elbow,flange,bend,tee,reducer,olet,bolt, gasket,nipple,coupling,plug,cap,cross...) and steel pipe. Elbow have LR Elbow and SR Elbow,and are divided into 45 degree,90 degree and 180 degree. Tee have equal tee and reducing tee. Reducer have CON reducer and ECC reducer. Olet have threadolet, weldolet,sockolet,elbolet,sweepolet,nipolet,boss,flanged olet... And the flange and pipe have a lot of kinds, in all our products are of good quality and complete.Our products main material is carbon steel, alloy steel and stainless steel.
Contact:karen@cpipefittings.com Web: http://www.cpipefittings.com Our main products have pipe fittings(elbow,flange,bend,tee,reducer,olet,bolt, gasket,nipple,coupling,plug,cap,cross...) and steel pipe. Elbow have LR Elbow and SR Elbow,and are divided into 45 degree,90 degree and 180 degree. Tee have equal tee and reducing tee. Reducer have CON reducer and ECC reducer. Olet have threadolet, weldolet,sockolet,elbolet,sweepolet,nipolet,boss,flanged olet... And the flange and pipe have a lot of kinds, in all our products are of good quality and complete.Our products main material is carbon steel, alloy steel and stainless steel.
High-precision stainless steel & titanium pipe mill line is specially designed to produce the industrial stainless pipe and titanium pipe
Products Name: Stainelss steel Threaded Screwed pipe fittings Material: 304 / 316 / 304L / 316L Casting Process: Investment Casting Size: 1/8”-6” End type: Thread/Socket Weld/Butt Weld Threads: NPT / BSPT / BSP / DIN2999 / ISO7-1 / ISO228 Weld: DIN 3239 / ASME B16.25
Standard :ASME B16.9, ASME B16.11 etc Material :20#, A105, 15CrMo, 304, 304L, 316, 316L, etc Minimum Order Quantity: 500 Pieces Nipple :Half Nipple, Barrel Nipple, Parallel Nipple, Hose Nipple, Hexagon Nipple, Reducing Hexagon Nipple Coupling :Half Coupling, Full Coupling (Threaded, Socket), Quick Coupling Outside Diameter: DN6-DN100 Pressure: 3000LB, 6000LB
